[Thu May 23 00:42:08 2013] Detection parameters:
  Position = (303.0, 290.1) = 17 45 34.32 -28 59 37.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 316.5 +/- 33.6
  Background counts = 295.7
  Rate = 0.01 +/- 0.001

[Thu May 23 00:42:12 2013] Off-axis axis estimate = 0.69'
[Thu May 23 00:43:21 2013] Using EEF radius (= 6.77 ")to estimate initial spatial extent for simple fitting
[Thu May 23 00:43:21 2013] Initial guess for spatial extent in simple fitting = 6.77"
[Thu May 23 00:43:21 2013] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.946
[Thu May 23 00:43:21 2013] Giving source the simple spatial ID 41 for pass 0, mean size = 6.77"
[Thu May 23 00:43:24 2013] fullrun_pn_xmm0554750601_pi300-10000_cl_pass0_src41.ximg exists
[Thu May 23 00:43:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554750601_pi300-10000_cl_pass0_src41.csv
[Thu May 23 00:43:24 2013] fullrun_pn_xmm0554750601_pi300-10000_cl_pass0_src41_1.ximg exists
[Thu May 23 00:43:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554750601_pi300-10000_cl_pass0_src41.csv
[Thu May 23 00:43:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554750601_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554750601_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:43:26 2013] fullrun_pn_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Thu May 23 00:43:26 2013] fullrun_pn_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Thu May 23 00:43:26 2013] Fit fullrun_pn_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Thu May 23 00:43:56 2013] Source 44 is offset by -6.418560 and -0.478540 pixels which is larger than
2 X fitted extent = 0.917094 x 0.917094, not incorporating fit results
[Thu May 23 00:43:56 2013] Spatial fit model total counts = 4950.830000, observed total counts = 4921.000000
[Thu May 23 00:43:56 2013] Offset between fit and detection position for source 44 = 6.910917 pixels
[Thu May 23 00:43:56 2013] 4725.934000 total counts/ 4259.870000 bgd. counts: snr = 7.140808
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 6.910917 pixels
  Position = (308.6, 294.1) = 17 45 32.45 -28 59 18.1
  Extent = 13.5 (13.5-27.1)", rotation angle = 0
  Source counts = 466.1 +/- 68.7
  Background counts = 4259.9
  Rate = 0.01 +/- 0.002
[Thu May 23 00:43:57 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:43:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:43:57 2013] Assessing source extent using major axis lower bound
[Thu May 23 00:43:57 2013] Source does appear to be extended
[Thu May 23 00:43:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 00:44:50 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 23 00:44:50 2013] Initial guess for spatial extent in simple fitting = 13.54"
[Thu May 23 00:44:50 2013] source mask rpix=3.1, npix_max = 52, mask sum = 40, frac = 0.766
[Thu May 23 00:44:50 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 13.54"
[Thu May 23 00:44:52 2013] fullrun_pn_xmm0554750601_pi300-10000_cl_pass1_src27.ximg exists
[Thu May 23 00:44:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554750601_pi300-10000_cl_pass1_src27.csv
[Thu May 23 00:44:52 2013] fullrun_pn_xmm0554750601_pi300-10000_cl_pass1_src27_1.ximg exists
[Thu May 23 00:44:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554750601_pi300-10000_cl_pass1_src27.csv
[Thu May 23 00:44:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554750601_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554750601_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:44:53 2013] fullrun_pn_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Thu May 23 00:44:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src27.csv
[Thu May 23 00:44:53 2013] fullrun_pn_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Thu May 23 00:44:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src27.csv
[Thu May 23 00:44:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:45:18 2013] Spatial fit model total counts = 3523.630000, observed total counts = 2789.000000
[Thu May 23 00:45:18 2013] Poor agreement between spatial fit and data for source 44
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 23 00:45:18 2013] Spatial fit model total counts = 5663.120000, observed total counts = 4789.000000
[Thu May 23 00:45:18 2013] Poor agreement between spatial fit and data for source 44
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 23 00:45:18 2013] Spatial fit model total counts = 6080.300000, observed total counts = 4679.000000
[Thu May 23 00:45:18 2013] Poor agreement between spatial fit and data for source 44
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 23 00:45:18 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:45:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:45:18 2013] Assessing source extent using major axis lower bound
[Thu May 23 00:45:18 2013] Source does appear to be extended
[Thu May 23 00:45:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 00:46:08 2013] XMMSAS src. selection expression = ellipse(26803.108000, 25537.660000, 812.592023, 812.592023, 0.000000, X, Y)
[Thu May 23 00:46:08 2013] Not overwriting source region fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src44_src.reg
[Thu May 23 00:46:08 2013] Extracting stamp from image fullrun_pn_xmm0554750601_pi300-10000_cl_sm2.00.img.gz, (262, 247) - (355, 341)
[Thu May 23 00:46:08 2013] XMMSAS bgd. selection expression = annulus(26803.108000, 25537.660000, 1354.320039, 2708.640078, X, Y) && !ellipse(24870.366600, 24160.842800, 936.152027, 936.152027, 0.000000, X, Y) && !ellipse(25106.381280, 24185.822708, 1146.224033, 512.353255, 346.888064, X, Y) && !ellipse(24083.376000, 24371.562000, 7134.192205, 7134.192205, 0.000000, X, Y) && !ellipse(24512.880000, 26704.886000, 893.312026, 893.312026, 0.000000, X, Y) && !ellipse(26961.381195, 26500.956635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23737.062000, 26395.186000, 1148.880033, 1148.880033, 0.000000, X, Y) && !ellipse(23460.135651, 25958.297852, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24357.482452, 26040.170990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25505.190552, 25522.174774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27961.692800, 24847.765600, 1137.832033, 724.792821, 0.000000, X, Y) && !ellipse(27483.630768, 25001.823547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26525.990906, 24653.212891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27313.002655, 24179.505219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26767.070221, 23968.093201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25962.447662, 22932.897278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24141.463959, 22770.558167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26701.671539, 22741.196198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25349.584595, 22744.682251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24268.987671, 22034.841583, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 23 00:46:08 2013] Writing fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src44.gif
[Thu May 23 00:46:17 2013] ../../xmm0554750601/products/events/fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src44_src.evt and ../../xmm0554750601/products/events/fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src44_bgd.evt exist, delete to re-create
[Thu May 23 00:46:17 2013] Mean detx,y = (-1790.99, 1013.52) 
[Thu May 23 00:46:17 2013] ../../xmm0554750601/products/images/fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src44_src.img and ../../xmm0554750601/products/images/fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src44_bgd.img exist, delete to re-create
[Thu May 23 00:46:17 2013] ../../xmm0554750601/products/spectra/fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src44_src_b10.pi.gz and ../../xmm0554750601/products/spectra/fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src44_bgd.pi exist, delete to re-create
[Thu May 23 00:46:17 2013] Setting source spectrum file to fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Thu May 23 00:46:17 2013] Setting bgd. spectrum file to fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Thu May 23 00:46:17 2013] ../../xmm0554750601/products/lightcurves/fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src44_src.lc and ../../xmm0554750601/products/lightcurves/fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src44_bgd.lc exist, delete to re-create
[Thu May 23 09:52:02 2013] fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src44.rmf exists, delete to re-create
[Thu May 23 09:52:02 2013] fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src44.arf exists, delete to re-create
[Thu May 23 11:25:52 2013] Updating aperture counts using extracted products
[Thu May 23 11:25:52 2013] Total counts from fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src44_src_b10.pi.gz = 3582.00
[Thu May 23 11:25:52 2013] Total counts from fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src44_bgd.pi.gz = 0.00
[Thu May 23 11:25:52 2013] Got source and background scale factors 1658732.000000, 0.000000
[Thu May 23 11:25:52 2013] Background scale factor is not positive, halting re-assessment of this source
[Thu May 23 11:25:58 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 23 11:25:58 2013] Using photon index=1.80, rate=0.0144, arf fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src44.arf
[Thu May 23 11:25:58 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 23 11:25:58 2013] Updating source flux to 1.4e-13
[Thu May 23 11:26:44 2013] Flag b found in src. 44 procflags, skipping spectral fitting
[Thu May 23 11:26:44 2013] Flag p found in src. 44 procflags, skipping spectral fitting
[Thu May 23 11:26:54 2013] xmm0554750601/analysis//spectral/fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src44_pl.csv not found, spectral fit skipped or did not complete