[Thu May 23 00:42:07 2013] Detection parameters:
  Position = (253.5, 360.7) = 17 45 50.71 -28 54 29.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 249.8 +/- 26.9
  Background counts = 213.0
  Rate = 0.01 +/- 0.001

[Thu May 23 00:42:12 2013] Off-axis axis estimate = 5.57'
[Thu May 23 00:43:21 2013] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Thu May 23 00:43:21 2013] Initial guess for spatial extent in simple fitting = 9.21"
[Thu May 23 00:43:21 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.912
[Thu May 23 00:43:21 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 9.21"
[Thu May 23 00:43:23 2013] fullrun_pn_xmm0554750601_pi300-10000_cl_pass0_src16.ximg exists
[Thu May 23 00:43:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554750601_pi300-10000_cl_pass0_src16.csv
[Thu May 23 00:43:23 2013] fullrun_pn_xmm0554750601_pi300-10000_cl_pass0_src16_1.ximg exists
[Thu May 23 00:43:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554750601_pi300-10000_cl_pass0_src16.csv
[Thu May 23 00:43:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554750601_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554750601_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:43:25 2013] fullrun_pn_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Thu May 23 00:43:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src16.csv
[Thu May 23 00:43:25 2013] fullrun_pn_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Thu May 23 00:43:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src16.csv
[Thu May 23 00:43:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:43:56 2013] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 11.399247 pixels away
[Thu May 23 00:43:57 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:43:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:43:57 2013] Assessing source extent using major
[Thu May 23 00:43:57 2013] Source does appear to be extended
[Thu May 23 00:43:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 00:44:50 2013] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Thu May 23 00:44:50 2013] Initial guess for spatial extent in simple fitting = 9.21"
[Thu May 23 00:44:50 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.912
[Thu May 23 00:44:50 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 9.21"
[Thu May 23 00:44:51 2013] fullrun_pn_xmm0554750601_pi300-10000_cl_pass1_src12.ximg exists
[Thu May 23 00:44:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554750601_pi300-10000_cl_pass1_src12.csv
[Thu May 23 00:44:51 2013] fullrun_pn_xmm0554750601_pi300-10000_cl_pass1_src12_1.ximg exists
[Thu May 23 00:44:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554750601_pi300-10000_cl_pass1_src12.csv
[Thu May 23 00:44:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554750601_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554750601_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:44:52 2013] fullrun_pn_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Thu May 23 00:44:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src12.csv
[Thu May 23 00:44:52 2013] fullrun_pn_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Thu May 23 00:44:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src12.csv
[Thu May 23 00:44:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:45:18 2013] Source 17 is offset by 8.217987 and 0.659772 pixels which is larger than
2 X fitted extent = 1.093136 x 1.093136, not incorporating fit results
[Thu May 23 00:45:18 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:45:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:45:18 2013] Assessing source extent using major
[Thu May 23 00:45:18 2013] Source does appear to be extended
[Thu May 23 00:45:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 00:46:08 2013] XMMSAS src. selection expression = ellipse(22008.082870, 31331.139923, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 23 00:46:08 2013] Not overwriting source region fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src17_src.reg
[Thu May 23 00:46:08 2013] Extracting stamp from image fullrun_pn_xmm0554750601_pi300-10000_cl_sm2.00.img.gz, (216, 323) - (291, 398)
[Thu May 23 00:46:08 2013] XMMSAS bgd. selection expression = annulus(22008.082870, 31331.139923, 1087.500000, 2175.000000, X, Y) && !ellipse(24083.376000, 24371.562000, 7134.192205, 7134.192205, 0.000000, X, Y) && !ellipse(22118.435181, 33479.679901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21742.066193, 32855.827667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19679.798000, 28463.746200, 1528.848044, 1528.848044, 0.000000, X, Y) && !ellipse(21745.002655, 28656.237732, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 23 00:46:08 2013] Writing fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src17.gif
[Thu May 23 00:46:13 2013] ../../xmm0554750601/products/events/fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src17_src.evt and ../../xmm0554750601/products/events/fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src17_bgd.evt exist, delete to re-create
[Thu May 23 00:46:14 2013] Mean detx,y = (2513.36, 7102.59) 
[Thu May 23 00:46:14 2013] ../../xmm0554750601/products/images/fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src17_src.img and ../../xmm0554750601/products/images/fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src17_bgd.img exist, delete to re-create
[Thu May 23 00:46:14 2013] ../../xmm0554750601/products/spectra/fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src17_src_b10.pi.gz and ../../xmm0554750601/products/spectra/fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src17_bgd.pi exist, delete to re-create
[Thu May 23 00:46:14 2013] Setting source spectrum file to fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu May 23 00:46:14 2013] Setting bgd. spectrum file to fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Thu May 23 00:46:14 2013] ../../xmm0554750601/products/lightcurves/fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src17_src.lc and ../../xmm0554750601/products/lightcurves/fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src17_bgd.lc exist, delete to re-create
[Thu May 23 09:52:02 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 23 09:52:02 2013] rmf not generated due to insufficient counts
[Thu May 23 09:52:02 2013] fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src17.arf exists, delete to re-create
[Thu May 23 11:25:49 2013] Updating aperture counts using extracted products
[Thu May 23 11:25:49 2013] Total counts from fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 1659.00
[Thu May 23 11:25:49 2013] Total counts from fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src17_bgd.pi.gz = 4180.00
[Thu May 23 11:25:49 2013] Got source and background scale factors 1290528.000000, 3940988.000000
[Thu May 23 11:25:49 2013] User source parameters:
  Position = (253.5, 360.7) = 17 45 50.71 -28 54 29.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 290.2 +/- 41.7
  Background aperture counts = 1368.8
  Rate = 0.009 +/- 0.001

[Thu May 23 11:25:49 2013] Updating counts from extracted products
[Thu May 23 11:25:49 2013] Set source signif. to 290.20/37.00 = 7.84
[Thu May 23 11:25:57 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 23 11:25:57 2013] Using photon index=1.80, rate=0.00894, arf fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src17.arf
[Thu May 23 11:25:57 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 23 11:25:57 2013] Updating source flux to 7.7e-14
[Thu May 23 11:26:44 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 23 11:26:54 2013] xmm0554750601/analysis//spectral/fullrun_pn_xmm0554750601_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete