[Thu May 23 00:42:25 2013] Detection parameters:
  Position = (183.8, 252.2) = 17 46 13.85 -29 2 20.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.1 +/- 14.2
  Background counts = 50.1
  Rate = 0.003 +/- 0.0006

[Thu May 23 00:42:26 2013] Off-axis axis estimate = 8.96'
[Thu May 23 00:43:30 2013] Using EEF radius (= 10.91 ")to estimate initial spatial extent for simple fitting
[Thu May 23 00:43:30 2013] Initial guess for spatial extent in simple fitting = 10.91"
[Thu May 23 00:43:30 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.995
[Thu May 23 00:43:30 2013] Giving source the simple spatial ID 37 for pass 0, mean size = 10.91"
[Thu May 23 00:43:31 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src37.ximg exists
[Thu May 23 00:43:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src37.csv
[Thu May 23 00:43:31 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src37_1.ximg exists
[Thu May 23 00:43:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src37.csv
[Thu May 23 00:43:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:43:32 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Thu May 23 00:43:32 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Thu May 23 00:43:32 2013] Fit fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Thu May 23 00:44:26 2013] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 52 at 12.260812 pixels away
[Thu May 23 00:44:26 2013] Source 52 is offset by 5.037800 and 5.723005 pixels which is larger than
2 X fitted extent = 1.315182 x 1.315182, not incorporating fit results
[Thu May 23 00:44:26 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:44:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:44:26 2013] Assessing source extent using major
[Thu May 23 00:44:26 2013] Source does appear to be extended
[Thu May 23 00:44:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 00:44:55 2013] Using EEF radius (= 10.91 ")to estimate initial spatial extent for simple fitting
[Thu May 23 00:44:55 2013] Initial guess for spatial extent in simple fitting = 10.91"
[Thu May 23 00:44:55 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.995
[Thu May 23 00:44:55 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 10.91"
[Thu May 23 00:44:57 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src35.ximg exists
[Thu May 23 00:44:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src35.csv
[Thu May 23 00:44:57 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src35_1.ximg exists
[Thu May 23 00:44:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src35.csv
[Thu May 23 00:44:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:44:58 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Thu May 23 00:44:58 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Thu May 23 00:44:58 2013] Fit fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Thu May 23 00:45:44 2013] Spatial fit model total counts = 680.774000, observed total counts = 681.000000
[Thu May 23 00:45:44 2013] Offset between fit and detection position for source 52 = 1.041036 pixels
[Thu May 23 00:45:44 2013] 686.388400 total counts/ 590.532000 bgd. counts: snr = 3.944568
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 1.041036 pixels
  Position = (184.8, 251.8) = 17 46 13.53 -29 2 21.8
  Extent = 12.9 (2.7-21.8)", rotation angle = 0
  Source counts = 95.9 +/- 26.2
  Background counts = 590.5
  Rate = 0.002 +/- 0.0007
[Thu May 23 00:45:44 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:45:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:45:44 2013] Assessing source extent using major axis lower bound
[Thu May 23 00:45:44 2013] Source does appear to be extended
[Thu May 23 00:45:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 09:52:13 2013] XMMSAS src. selection expression = ellipse(16027.448200, 21857.521600, 775.674022, 775.674022, 0.000000, X, Y)
[Thu May 23 09:52:13 2013] Not overwriting source region fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src52_src.reg
[Thu May 23 09:52:13 2013] Extracting stamp from image fullrun_mos2_xmm0554750601_pi300-10000_cl_sm2.00.img.gz, (140, 207) - (229, 296)
[Thu May 23 09:52:13 2013] XMMSAS bgd. selection expression = annulus(16027.448200, 21857.521600, 1292.790037, 2585.580074, X, Y)
[Thu May 23 09:52:13 2013] Writing fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src52.gif
[Thu May 23 09:56:08 2013] Mean detx,y = (-8850.06, 1874.25) 
[Thu May 23 09:56:09 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 23 09:56:35 2013] Binned source spectrum to 10 counts/bin
[Thu May 23 09:56:35 2013] Setting source spectrum file to fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Thu May 23 09:56:35 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Thu May 23 11:00:01 2013] Not generating rmf since there are only 95 counts
[Thu May 23 11:00:01 2013] rmf not generated due to insufficient counts
[Thu May 23 11:26:09 2013] Updating aperture counts using extracted products
[Thu May 23 11:26:09 2013] Total counts from fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src52_src_b10.pi.gz = 655.00
[Thu May 23 11:26:09 2013] Total counts from fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src52_bgd.pi.gz = 4353.00
[Thu May 23 11:26:10 2013] Got source and background scale factors 1854376.000000, 14574440.000000
[Thu May 23 11:26:10 2013] User source parameters:
  Position = (184.8, 251.8) = 17 46 13.53 -29 2 21.8
  Extent = 12.9 (2.7-21.8)", rotation angle = 0
  Source aperture counts = 101.1 +/- 26.6
  Background aperture counts = 553.9
  Rate = 0.003 +/- 0.0007

[Thu May 23 11:26:12 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 23 11:26:12 2013] Using photon index=1.80, rate=0.00247, arf fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src52.arf
[Thu May 23 11:26:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 23 11:26:12 2013] Updating source flux to 6.6e-14
[Thu May 23 11:26:31 2013] Flag b found in src. 52 procflags, skipping spectral fitting
[Thu May 23 11:26:31 2013] Source 52 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 23 11:26:44 2013] xmm0554750601/analysis//spectral/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src52_pl.csv not found, spectral fit skipped or did not complete