[Thu May 23 00:42:25 2013] Detection parameters:
  Position = (275.5, 259.8) = 17 45 43.45 -29 1 44.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.6 +/- 19.5
  Background counts = 143.6
  Rate = 0.002 +/- 0.0006

[Thu May 23 00:42:26 2013] Off-axis axis estimate = 3.26'
[Thu May 23 00:43:30 2013] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Thu May 23 00:43:30 2013] Initial guess for spatial extent in simple fitting = 8.06"
[Thu May 23 00:43:30 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.129
[Thu May 23 00:43:30 2013] Giving source the simple spatial ID 41 for pass 0, mean size = 8.06"
[Thu May 23 00:43:31 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src41.ximg exists
[Thu May 23 00:43:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src41.csv
[Thu May 23 00:43:31 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src41_1.ximg exists
[Thu May 23 00:43:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src41.csv
[Thu May 23 00:43:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:43:32 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Thu May 23 00:43:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src41.csv
[Thu May 23 00:43:32 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Thu May 23 00:43:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src41.csv
[Thu May 23 00:43:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:44:26 2013] Source 51 is offset by 2.017665 and 1.712659 pixels which is larger than
2 X fitted extent = 0.928568 x 0.928568, not incorporating fit results
[Thu May 23 00:44:26 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:44:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:44:26 2013] Assessing source extent using major
[Thu May 23 00:44:26 2013] Source does appear to be extended
[Thu May 23 00:44:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 00:44:55 2013] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Thu May 23 00:44:55 2013] Initial guess for spatial extent in simple fitting = 8.06"
[Thu May 23 00:44:55 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.129
[Thu May 23 00:44:55 2013] Giving source the simple spatial ID 37 for pass 1, mean size = 8.06"
[Thu May 23 00:44:57 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src37.ximg exists
[Thu May 23 00:44:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src37.csv
[Thu May 23 00:44:57 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src37_1.ximg exists
[Thu May 23 00:44:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src37.csv
[Thu May 23 00:44:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:44:58 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Thu May 23 00:44:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src37.csv
[Thu May 23 00:44:58 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Thu May 23 00:44:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src37.csv
[Thu May 23 00:44:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:45:44 2013] Source 51 is offset by 1.631994 and -6.040675 pixels which is larger than
2 X fitted extent = 1.647002 x 1.647002, not incorporating fit results
[Thu May 23 00:45:44 2013] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 51 at 39.558471 pixels away
[Thu May 23 00:45:44 2013] Warning: source 34 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 51 at 38.338002 pixels away
[Thu May 23 00:45:44 2013] Source 51 is offset by 2.077290 and 1.741670 pixels which is larger than
2 X fitted extent = 1.134947 x 1.134947, not incorporating fit results
[Thu May 23 00:45:44 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:45:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:45:44 2013] Assessing source extent using major
[Thu May 23 00:45:44 2013] Source does appear to be extended
[Thu May 23 00:45:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 09:52:13 2013] XMMSAS src. selection expression = ellipse(23916.171448, 22552.649292, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 23 09:52:13 2013] Not overwriting source region fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src51_src.reg
[Thu May 23 09:52:13 2013] Extracting stamp from image fullrun_mos2_xmm0554750601_pi300-10000_cl_sm2.00.img.gz, (238, 222) - (313, 297)
[Thu May 23 09:52:13 2013] XMMSAS bgd. selection expression = annulus(23916.171448, 22552.649292, 1087.500000, 2175.000000, X, Y) && !ellipse(24831.236000, 24127.048000, 663.937619, 437.536013, 67.520600, X, Y) && !ellipse(25684.712000, 24729.828000, 1081.576031, 1081.576031, 0.000000, X, Y) && !ellipse(23857.147491, 24485.550446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25401.762000, 25272.734000, 1023.880029, 1023.880029, 0.000000, X, Y) && !ellipse(25114.295898, 22956.354462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26757.512000, 25571.910000, 1081.576031, 1081.576031, 0.000000, X, Y) && !ellipse(26026.396698, 23018.174164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26485.198000, 25440.482000, 1995.984057, 1995.984057, 0.000000, X, Y) && !ellipse(26770.341217, 23123.159332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26765.413483, 23525.560883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22061.993200, 21480.729600, 1422.312041, 1422.312041, 0.000000, X, Y)
[Thu May 23 09:52:13 2013] Writing fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src51.gif
[Thu May 23 09:57:13 2013] Mean detx,y = (-972.98, 1610.53) 
[Thu May 23 09:57:14 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 23 09:57:23 2013] Binned source spectrum to 10 counts/bin
[Thu May 23 09:57:24 2013] Setting source spectrum file to fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Thu May 23 09:57:24 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src51_bgd.pi.gz
[Thu May 23 11:00:13 2013] Not generating rmf since there are only 82 counts
[Thu May 23 11:00:13 2013] rmf not generated due to insufficient counts
[Thu May 23 11:26:10 2013] Updating aperture counts using extracted products
[Thu May 23 11:26:10 2013] Total counts from fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src51_src_b10.pi.gz = 1165.00
[Thu May 23 11:26:10 2013] Total counts from fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src51_bgd.pi.gz = 2989.00
[Thu May 23 11:26:10 2013] Got source and background scale factors 1173188.000000, 4359080.000000
[Thu May 23 11:26:10 2013] User source parameters:
  Position = (275.5, 259.8) = 17 45 43.45 -29 1 44.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 360.6 +/- 35.1
  Background aperture counts = 804.4
  Rate = 0.009 +/- 0.0009

[Thu May 23 11:26:10 2013] Updating counts from extracted products
[Thu May 23 11:26:10 2013] Set source signif. to 360.55/28.36 = 12.71
[Thu May 23 11:26:12 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 23 11:26:12 2013] Using photon index=1.80, rate=0.00929, arf fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src51.arf
[Thu May 23 11:26:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 23 11:26:12 2013] Updating source flux to 1.6e-13
[Thu May 23 11:26:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 23 11:26:44 2013] xmm0554750601/analysis//spectral/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src51_pl.csv not found, spectral fit skipped or did not complete