[Thu May 23 00:42:23 2013] Detection parameters:
  Position = (301.9, 290.0) = 17 45 34.67 -28 59 36.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 150.6 +/- 23.0
  Background counts = 137.0
  Rate = 0.004 +/- 0.0006

[Thu May 23 00:42:26 2013] Off-axis axis estimate = 0.66'
[Thu May 23 00:43:30 2013] Using EEF radius (= 6.76 ")to estimate initial spatial extent for simple fitting
[Thu May 23 00:43:30 2013] Initial guess for spatial extent in simple fitting = 6.76"
[Thu May 23 00:43:30 2013] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.948
[Thu May 23 00:43:30 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 6.76"
[Thu May 23 00:43:31 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src17.ximg exists
[Thu May 23 00:43:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src17.csv
[Thu May 23 00:43:31 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src17_1.ximg exists
[Thu May 23 00:43:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src17.csv
[Thu May 23 00:43:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:43:32 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Thu May 23 00:43:32 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Thu May 23 00:43:32 2013] Fit fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Thu May 23 00:44:26 2013] Warning, spatial fit 17 centroid is now closest to src. 14
[Thu May 23 00:44:26 2013] Source 43 is offset by 0.878750 and -0.939205 pixels which is larger than
2 X fitted extent = 0.757977 x 0.757977, not incorporating fit results
[Thu May 23 00:44:26 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:44:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:44:26 2013] Assessing source extent using major
[Thu May 23 00:44:26 2013] Source does appear to be extended
[Thu May 23 00:44:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 00:44:26 2013] Source is confused with source 14
[Thu May 23 00:44:55 2013] Using EEF radius (= 6.76 ")to estimate initial spatial extent for simple fitting
[Thu May 23 00:44:55 2013] Initial guess for spatial extent in simple fitting = 6.76"
[Thu May 23 00:44:55 2013] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.948
[Thu May 23 00:44:55 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 6.76"
[Thu May 23 00:44:57 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src16.ximg exists
[Thu May 23 00:44:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src16.csv
[Thu May 23 00:44:57 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src16_1.ximg exists
[Thu May 23 00:44:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src16.csv
[Thu May 23 00:44:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:44:57 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Thu May 23 00:44:57 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Thu May 23 00:44:57 2013] Fit fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Thu May 23 00:45:44 2013] Warning, spatial fit 16 centroid is now closest to src. 3
[Thu May 23 00:45:44 2013] Spatial fit model total counts = 2539.120000, observed total counts = 2540.000000
[Thu May 23 00:45:44 2013] Offset between fit and detection position for source 43 = 4.258636 pixels
[Thu May 23 00:45:44 2013] Warning, changing simple spatial fit ID from 16 to 27
[Thu May 23 00:45:44 2013] 2527.126000 total counts/ 1836.980000 bgd. counts: snr = 16.102331
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 4.258636 pixels
  Position = (305.0, 293.0) = 17 45 33.66 -28 59 22.9
  Extent = 24.9 (24.9-49.9)", rotation angle = 0
  Source counts = 690.1 +/- 50.3
  Background counts = 1837.0
  Rate = 0.02 +/- 0.001
[Thu May 23 00:45:44 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:45:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:45:44 2013] Assessing source extent using major axis lower bound
[Thu May 23 00:45:44 2013] Source does appear to be extended
[Thu May 23 00:45:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 09:52:12 2013] XMMSAS src. selection expression = ellipse(26485.198000, 25440.482000, 1496.988043, 1496.988043, 0.000000, X, Y)
[Thu May 23 09:52:12 2013] Not overwriting source region fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src43_src.reg
[Thu May 23 09:52:12 2013] Extracting stamp from image fullrun_mos2_xmm0554750601_pi300-10000_cl_sm2.00.img.gz, (219, 207) - (391, 379)
[Thu May 23 09:52:12 2013] XMMSAS bgd. selection expression = annulus(26485.198000, 25440.482000, 2494.980072, 4989.960144, X, Y) && !ellipse(24831.236000, 24127.048000, 663.937619, 437.536013, 67.520600, X, Y) && !ellipse(25684.712000, 24729.828000, 1081.576031, 1081.576031, 0.000000, X, Y) && !ellipse(23857.147491, 24485.550446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25401.762000, 25272.734000, 1023.880029, 1023.880029, 0.000000, X, Y) && !ellipse(23437.387600, 26489.250200, 409.574412, 409.574412, 0.000000, X, Y) && !ellipse(23441.428314, 26042.135712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25092.569794, 26555.236053, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(25114.295898, 22956.354462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25889.313320, 28731.738000, 282.235583, 282.235583, 0.000000, X, Y) && !ellipse(24368.922974, 25973.455414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26757.512000, 25571.910000, 1081.576031, 1081.576031, 0.000000, X, Y) && !ellipse(26026.396698, 23018.174164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26770.341217, 23123.159332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21928.773163, 31267.705963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21128.916000, 29294.761400, 932.760027, 932.760027, 0.000000, X, Y) && !ellipse(27833.334000, 24916.544000, 1155.240033, 1155.240033, 0.000000, X, Y) && !ellipse(26813.804000, 25752.450000, 935.560027, 935.560027, 0.000000, X, Y) && !ellipse(31877.566193, 28992.842346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26765.413483, 23525.560883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25603.508942, 25668.397858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21782.499634, 28913.175537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22061.993200, 21480.729600, 1422.312041, 1422.312041, 0.000000, X, Y) && !ellipse(23916.171448, 22552.649292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28077.394000, 26811.188000, 1152.488033, 1152.488033, 0.000000, X, Y) && !ellipse(27256.426000, 26191.066000, 1249.752036, 1249.752036, 0.000000, X, Y)
[Thu May 23 09:52:12 2013] Writing fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src43.gif
[Thu May 23 09:52:15 2013] ../../xmm0554750601/products/events/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src43_src.evt and ../../xmm0554750601/products/events/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src43_bgd.evt exist, delete to re-create
[Thu May 23 09:52:15 2013] Mean detx,y = (1629.34, -967.98) 
[Thu May 23 09:52:15 2013] ../../xmm0554750601/products/images/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src43_src.img and ../../xmm0554750601/products/images/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src43_bgd.img exist, delete to re-create
[Thu May 23 09:52:15 2013] ../../xmm0554750601/products/spectra/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src43_src_b10.pi.gz and ../../xmm0554750601/products/spectra/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src43_bgd.pi exist, delete to re-create
[Thu May 23 09:52:15 2013] Setting source spectrum file to fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Thu May 23 09:52:15 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Thu May 23 09:52:15 2013] ../../xmm0554750601/products/lightcurves/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src43_src.lc and ../../xmm0554750601/products/lightcurves/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src43_bgd.lc exist, delete to re-create
[Thu May 23 11:26:07 2013] Updating aperture counts using extracted products
[Thu May 23 11:26:07 2013] Total counts from fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src43_src_b10.pi.gz = 7806.00
[Thu May 23 11:26:07 2013] Total counts from fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src43_bgd.pi.gz = 21382.00
[Thu May 23 11:26:07 2013] Got source and background scale factors 6980012.000000, 44126021.000000
[Thu May 23 11:26:07 2013] User source parameters:
  Position = (305.0, 293.0) = 17 45 33.66 -28 59 22.9
  Extent = 24.9 (24.9-49.9)", rotation angle = 0
  Source aperture counts = 4423.7 +/- 89.4
  Background aperture counts = 3382.3
  Rate = 0.1 +/- 0.002

[Thu May 23 11:26:11 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 23 11:26:11 2013] Using photon index=1.80, rate=0.0178, arf fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src43.arf
[Thu May 23 11:26:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 23 11:26:11 2013] Updating source flux to 2.9e-13
[Thu May 23 11:26:31 2013] Flag b found in src. 43 procflags, skipping spectral fitting
[Thu May 23 11:26:31 2013] Flag c found in src. 43 procflags, skipping spectral fitting
[Thu May 23 11:26:44 2013] xmm0554750601/analysis//spectral/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src43_pl.csv not found, spectral fit skipped or did not complete