[Thu May 23 00:42:22 2013] Detection parameters:
  Position = (250.9, 332.9) = 17 45 51.57 -28 56 33.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.8 +/- 19.6
  Background counts = 121.5
  Rate = 0.003 +/- 0.0006

[Thu May 23 00:42:26 2013] Off-axis axis estimate = 4.25'
[Thu May 23 00:43:30 2013] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Thu May 23 00:43:30 2013] Initial guess for spatial extent in simple fitting = 8.56"
[Thu May 23 00:43:30 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.027
[Thu May 23 00:43:30 2013] Giving source the simple spatial ID 34 for pass 0, mean size = 8.56"
[Thu May 23 00:43:31 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src34.ximg exists
[Thu May 23 00:43:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src34.csv
[Thu May 23 00:43:31 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src34_1.ximg exists
[Thu May 23 00:43:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src34.csv
[Thu May 23 00:43:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:43:32 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Thu May 23 00:43:32 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Thu May 23 00:43:32 2013] Fit fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly
[Thu May 23 00:44:26 2013] Source 36 is offset by 3.849375 and -2.334638 pixels which is larger than
2 X fitted extent = 0.983439 x 0.983439, not incorporating fit results
[Thu May 23 00:44:26 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:44:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:44:26 2013] Assessing source extent using major
[Thu May 23 00:44:26 2013] Source does appear to be extended
[Thu May 23 00:44:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 00:44:55 2013] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Thu May 23 00:44:55 2013] Initial guess for spatial extent in simple fitting = 8.56"
[Thu May 23 00:44:55 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.027
[Thu May 23 00:44:55 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 8.56"
[Thu May 23 00:44:57 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src32.ximg exists
[Thu May 23 00:44:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src32.csv
[Thu May 23 00:44:57 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src32_1.ximg exists
[Thu May 23 00:44:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src32.csv
[Thu May 23 00:44:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:44:58 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Thu May 23 00:44:58 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Thu May 23 00:44:58 2013] Fit fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Thu May 23 00:45:44 2013] Source 36 is offset by -2.789935 and -1.172350 pixels which is larger than
2 X fitted extent = 1.450216 x 1.450216, not incorporating fit results
[Thu May 23 00:45:44 2013] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 10.295742 pixels away
[Thu May 23 00:45:44 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:45:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:45:44 2013] Assessing source extent using major
[Thu May 23 00:45:44 2013] Source does appear to be extended
[Thu May 23 00:45:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 09:52:12 2013] XMMSAS src. selection expression = ellipse(21782.499634, 28913.175537, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 23 09:52:12 2013] Not overwriting source region fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src36_src.reg
[Thu May 23 09:52:12 2013] Extracting stamp from image fullrun_mos2_xmm0554750601_pi300-10000_cl_sm2.00.img.gz, (213, 295) - (288, 370)
[Thu May 23 09:52:12 2013] XMMSAS bgd. selection expression = annulus(21782.499634, 28913.175537, 1087.500000, 2175.000000, X, Y) && !ellipse(23437.387600, 26489.250200, 409.574412, 409.574412, 0.000000, X, Y) && !ellipse(23441.428314, 26042.135712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25092.569794, 26555.236053, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(24368.922974, 25973.455414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21928.773163, 31267.705963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21128.916000, 29294.761400, 932.760027, 932.760027, 0.000000, X, Y) && !ellipse(19006.573578, 28624.061432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19439.396454, 28598.015594, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 23 09:52:12 2013] Writing fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src36.gif
[Thu May 23 09:55:12 2013] Mean detx,y = (-2754.20, -4811.92) 
[Thu May 23 09:55:13 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 23 09:55:23 2013] Binned source spectrum to 10 counts/bin
[Thu May 23 09:55:23 2013] Setting source spectrum file to fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Thu May 23 09:55:23 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Thu May 23 10:52:55 2013] Not generating rmf since there are only 89 counts
[Thu May 23 10:52:55 2013] rmf not generated due to insufficient counts
[Thu May 23 11:26:09 2013] Updating aperture counts using extracted products
[Thu May 23 11:26:09 2013] Total counts from fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src36_src_b10.pi.gz = 1175.00
[Thu May 23 11:26:09 2013] Total counts from fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src36_bgd.pi.gz = 5129.00
[Thu May 23 11:26:09 2013] Got source and background scale factors 1339200.000000, 8312300.000000
[Thu May 23 11:26:09 2013] User source parameters:
  Position = (250.9, 332.9) = 17 45 51.57 -28 56 33.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 348.7 +/- 35.3
  Background aperture counts = 826.3
  Rate = 0.009 +/- 0.0009

[Thu May 23 11:26:09 2013] Updating counts from extracted products
[Thu May 23 11:26:09 2013] Set source signif. to 348.66/28.75 = 12.13
[Thu May 23 11:26:11 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 23 11:26:11 2013] Using photon index=1.80, rate=0.00898, arf fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src36.arf
[Thu May 23 11:26:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 23 11:26:12 2013] Updating source flux to 1.9e-13
[Thu May 23 11:26:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 23 11:26:44 2013] xmm0554750601/analysis//spectral/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete