[Thu May 23 00:42:22 2013] Detection parameters:
  Position = (215.2, 358.4) = 17 46 3.42 -28 54 36.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.0 +/- 18.4
  Background counts = 114.5
  Rate = 0.003 +/- 0.0007

[Thu May 23 00:42:26 2013] Off-axis axis estimate = 7.44'
[Thu May 23 00:43:30 2013] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting
[Thu May 23 00:43:30 2013] Initial guess for spatial extent in simple fitting = 10.15"
[Thu May 23 00:43:30 2013] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.934
[Thu May 23 00:43:30 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 10.15"
[Thu May 23 00:43:31 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src28.ximg exists
[Thu May 23 00:43:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src28.csv
[Thu May 23 00:43:31 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src28_1.ximg exists
[Thu May 23 00:43:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src28.csv
[Thu May 23 00:43:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:43:32 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Thu May 23 00:43:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src28.csv
[Thu May 23 00:43:32 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Thu May 23 00:43:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src28.csv
[Thu May 23 00:43:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:44:26 2013] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 13.653383 pixels away
[Thu May 23 00:44:26 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:44:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:44:26 2013] Assessing source extent using major
[Thu May 23 00:44:26 2013] Source does appear to be extended
[Thu May 23 00:44:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 00:44:55 2013] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting
[Thu May 23 00:44:55 2013] Initial guess for spatial extent in simple fitting = 10.15"
[Thu May 23 00:44:55 2013] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.934
[Thu May 23 00:44:55 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 10.15"
[Thu May 23 00:44:57 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src26.ximg exists
[Thu May 23 00:44:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src26.csv
[Thu May 23 00:44:57 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src26_1.ximg exists
[Thu May 23 00:44:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src26.csv
[Thu May 23 00:44:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:44:58 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Thu May 23 00:44:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src26.csv
[Thu May 23 00:44:58 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Thu May 23 00:44:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src26.csv
[Thu May 23 00:44:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:45:44 2013] Spatial fit model total counts = 1288.070000, observed total counts = 1015.000000
[Thu May 23 00:45:44 2013] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 23 00:45:44 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:45:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:45:44 2013] Assessing source extent using major
[Thu May 23 00:45:44 2013] Source does appear to be extended
[Thu May 23 00:45:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 09:52:12 2013] XMMSAS src. selection expression = ellipse(18669.694168, 31132.227783, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 23 09:52:12 2013] Not overwriting source region fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src30_src.reg
[Thu May 23 09:52:12 2013] Extracting stamp from image fullrun_mos2_xmm0554750601_pi300-10000_cl_sm2.00.img.gz, (178, 321) - (253, 396)
[Thu May 23 09:52:12 2013] XMMSAS bgd. selection expression = annulus(18669.694168, 31132.227783, 1087.500000, 2175.000000, X, Y) && !ellipse(21128.916000, 29294.761400, 932.760027, 932.760027, 0.000000, X, Y) && !ellipse(19006.573578, 28624.061432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19439.396454, 28598.015594, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 23 09:52:12 2013] Writing fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src30.gif
[Thu May 23 09:53:13 2013] Mean detx,y = (-5719.85, -7289.41) 
[Thu May 23 09:53:14 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 23 09:53:34 2013] Binned source spectrum to 10 counts/bin
[Thu May 23 09:53:34 2013] Setting source spectrum file to fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Thu May 23 09:53:34 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Thu May 23 10:43:37 2013] Not generating rmf since there are only 84 counts
[Thu May 23 10:43:37 2013] rmf not generated due to insufficient counts
[Thu May 23 11:26:08 2013] Updating aperture counts using extracted products
[Thu May 23 11:26:08 2013] Total counts from fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src30_src_b10.pi.gz = 780.00
[Thu May 23 11:26:08 2013] Total counts from fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src30_bgd.pi.gz = 5485.00
[Thu May 23 11:26:08 2013] Got source and background scale factors 1138434.000000, 9674159.000000
[Thu May 23 11:26:08 2013] User source parameters:
  Position = (215.2, 358.4) = 17 46 3.42 -28 54 36.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 134.5 +/- 28.9
  Background aperture counts = 645.5
  Rate = 0.003 +/- 0.0007

[Thu May 23 11:26:08 2013] Updating counts from extracted products
[Thu May 23 11:26:08 2013] Set source signif. to 134.54/25.41 = 5.30
[Thu May 23 11:26:11 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 23 11:26:11 2013] Using photon index=1.80, rate=0.00347, arf fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src30.arf
[Thu May 23 11:26:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 23 11:26:11 2013] Updating source flux to 9.1e-14
[Thu May 23 11:26:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 23 11:26:44 2013] xmm0554750601/analysis//spectral/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete