[Thu May 23 00:42:22 2013] Detection parameters:
  Position = (252.6, 360.0) = 17 45 51.01 -28 54 31.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.6 +/- 18.1
  Background counts = 92.5
  Rate = 0.004 +/- 0.0006

[Thu May 23 00:42:26 2013] Off-axis axis estimate = 5.56'
[Thu May 23 00:43:30 2013] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Thu May 23 00:43:30 2013] Initial guess for spatial extent in simple fitting = 9.21"
[Thu May 23 00:43:30 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.095
[Thu May 23 00:43:30 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 9.21"
[Thu May 23 00:43:31 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src22.ximg exists
[Thu May 23 00:43:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src22.csv
[Thu May 23 00:43:31 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src22_1.ximg exists
[Thu May 23 00:43:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src22.csv
[Thu May 23 00:43:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:43:32 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Thu May 23 00:43:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src22.csv
[Thu May 23 00:43:32 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Thu May 23 00:43:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src22.csv
[Thu May 23 00:43:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:44:26 2013] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 12.336700 pixels away
[Thu May 23 00:44:26 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:44:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:44:26 2013] Assessing source extent using major
[Thu May 23 00:44:26 2013] Source does appear to be extended
[Thu May 23 00:44:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 00:44:55 2013] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Thu May 23 00:44:55 2013] Initial guess for spatial extent in simple fitting = 9.21"
[Thu May 23 00:44:55 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.095
[Thu May 23 00:44:55 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 9.21"
[Thu May 23 00:44:57 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src20.ximg exists
[Thu May 23 00:44:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src20.csv
[Thu May 23 00:44:57 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src20_1.ximg exists
[Thu May 23 00:44:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src20.csv
[Thu May 23 00:44:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:44:57 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Thu May 23 00:44:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src20.csv
[Thu May 23 00:44:57 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Thu May 23 00:44:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src20.csv
[Thu May 23 00:44:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:45:44 2013] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 11.729682 pixels away
[Thu May 23 00:45:44 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:45:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:45:44 2013] Assessing source extent using major
[Thu May 23 00:45:44 2013] Source does appear to be extended
[Thu May 23 00:45:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 09:52:12 2013] XMMSAS src. selection expression = ellipse(21928.773163, 31267.705963, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 23 09:52:12 2013] Not overwriting source region fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src29_src.reg
[Thu May 23 09:52:12 2013] Extracting stamp from image fullrun_mos2_xmm0554750601_pi300-10000_cl_sm2.00.img.gz, (215, 322) - (290, 397)
[Thu May 23 09:52:12 2013] XMMSAS bgd. selection expression = annulus(21928.773163, 31267.705963, 1087.500000, 2175.000000, X, Y) && !ellipse(21669.836186, 32828.055863, 547.992275, 319.510124, 63.434265, X, Y) && !ellipse(21128.916000, 29294.761400, 932.760027, 932.760027, 0.000000, X, Y) && !ellipse(19006.573578, 28624.061432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21782.499634, 28913.175537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19439.396454, 28598.015594, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 23 09:52:12 2013] Writing fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src29.gif
[Thu May 23 09:52:15 2013] ../../xmm0554750601/products/events/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src29_src.evt and ../../xmm0554750601/products/events/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src29_bgd.evt exist, delete to re-create
[Thu May 23 09:52:15 2013] Mean detx,y = (-2455.18, -7239.64) 
[Thu May 23 09:52:15 2013] ../../xmm0554750601/products/images/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src29_src.img and ../../xmm0554750601/products/images/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src29_bgd.img exist, delete to re-create
[Thu May 23 09:52:15 2013] ../../xmm0554750601/products/spectra/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src29_src_b10.pi.gz and ../../xmm0554750601/products/spectra/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src29_bgd.pi exist, delete to re-create
[Thu May 23 09:52:15 2013] Setting source spectrum file to fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Thu May 23 09:52:15 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Thu May 23 09:52:15 2013] ../../xmm0554750601/products/lightcurves/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src29_src.lc and ../../xmm0554750601/products/lightcurves/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src29_bgd.lc exist, delete to re-create
[Thu May 23 10:33:43 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 23 10:33:43 2013] rmf not generated due to insufficient counts
[Thu May 23 11:26:08 2013] Updating aperture counts using extracted products
[Thu May 23 11:26:08 2013] Total counts from fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 677.00
[Thu May 23 11:26:08 2013] Total counts from fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src29_bgd.pi.gz = 3808.00
[Thu May 23 11:26:08 2013] Got source and background scale factors 1072206.000000, 8056605.000000
[Thu May 23 11:26:08 2013] User source parameters:
  Position = (252.6, 360.0) = 17 45 51.01 -28 54 31.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 170.2 +/- 27.0
  Background aperture counts = 506.8
  Rate = 0.004 +/- 0.0007

[Thu May 23 11:26:08 2013] Updating counts from extracted products
[Thu May 23 11:26:08 2013] Set source signif. to 170.22/22.51 = 7.56
[Thu May 23 11:26:11 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 23 11:26:11 2013] Using photon index=1.80, rate=0.00438, arf fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src29.arf
[Thu May 23 11:26:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 23 11:26:11 2013] Updating source flux to 1e-13
[Thu May 23 11:26:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 23 11:26:44 2013] xmm0554750601/analysis//spectral/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete