[Thu May 23 00:42:21 2013] Detection parameters:
  Position = (289.2, 264.4) = 17 45 38.88 -29 1 25.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 237.8 +/- 25.6
  Background counts = 147.0
  Rate = 0.008 +/- 0.0008

[Thu May 23 00:42:26 2013] Off-axis axis estimate = 2.55'
[Thu May 23 00:43:30 2013] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Thu May 23 00:43:30 2013] Initial guess for spatial extent in simple fitting = 7.71"
[Thu May 23 00:43:30 2013] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.727
[Thu May 23 00:43:30 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 7.71"
[Thu May 23 00:43:31 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src8.ximg exists
[Thu May 23 00:43:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src8.csv
[Thu May 23 00:43:31 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src8_1.ximg exists
[Thu May 23 00:43:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src8.csv
[Thu May 23 00:43:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:43:32 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Thu May 23 00:43:32 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Thu May 23 00:43:32 2013] Fit fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Thu May 23 00:44:26 2013] Source 16 is offset by 2.886229 and -7.662317 pixels which is larger than
2 X fitted extent = 3.133356 x 3.133356, not incorporating fit results
[Thu May 23 00:44:26 2013] Source 16 is offset by 4.441608 and -2.757466 pixels which is larger than
2 X fitted extent = 3.014510 x 3.014510, not incorporating fit results
[Thu May 23 00:44:26 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:44:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:44:26 2013] Assessing source extent using major
[Thu May 23 00:44:26 2013] Source does appear to be extended
[Thu May 23 00:44:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 00:44:55 2013] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Thu May 23 00:44:55 2013] Initial guess for spatial extent in simple fitting = 7.71"
[Thu May 23 00:44:55 2013] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.727
[Thu May 23 00:44:55 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 7.71"
[Thu May 23 00:44:56 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src8.ximg exists
[Thu May 23 00:44:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src8.csv
[Thu May 23 00:44:56 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu May 23 00:44:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src8.csv
[Thu May 23 00:44:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:44:57 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu May 23 00:44:57 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu May 23 00:44:57 2013] Fit fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Thu May 23 00:45:44 2013] Source 16 is offset by 2.886643 and -7.662317 pixels which is larger than
2 X fitted extent = 3.234189 x 3.234189, not incorporating fit results
[Thu May 23 00:45:44 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:45:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:45:44 2013] Assessing source extent using major
[Thu May 23 00:45:44 2013] Source does appear to be extended
[Thu May 23 00:45:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 09:52:12 2013] XMMSAS src. selection expression = ellipse(25114.295898, 22956.354462, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 23 09:52:12 2013] Not overwriting source region fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src16_src.reg
[Thu May 23 09:52:12 2013] Extracting stamp from image fullrun_mos2_xmm0554750601_pi300-10000_cl_sm2.00.img.gz, (252, 227) - (327, 302)
[Thu May 23 09:52:12 2013] XMMSAS bgd. selection expression = annulus(25114.295898, 22956.354462, 1087.500000, 2175.000000, X, Y) && !ellipse(24831.236000, 24127.048000, 663.937619, 437.536013, 67.520600, X, Y) && !ellipse(25684.712000, 24729.828000, 1081.576031, 1081.576031, 0.000000, X, Y) && !ellipse(23857.147491, 24485.550446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25401.762000, 25272.734000, 1023.880029, 1023.880029, 0.000000, X, Y) && !ellipse(25092.569794, 26555.236053, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(24368.922974, 25973.455414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26757.512000, 25571.910000, 1081.576031, 1081.576031, 0.000000, X, Y) && !ellipse(26026.396698, 23018.174164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26485.198000, 25440.482000, 1995.984057, 1995.984057, 0.000000, X, Y) && !ellipse(26770.341217, 23123.159332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27833.334000, 24916.544000, 1155.240033, 1155.240033, 0.000000, X, Y) && !ellipse(26813.804000, 25752.450000, 935.560027, 935.560027, 0.000000, X, Y) && !ellipse(26765.413483, 23525.560883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25603.508942, 25668.397858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22061.993200, 21480.729600, 1422.312041, 1422.312041, 0.000000, X, Y) && !ellipse(23916.171448, 22552.649292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27256.426000, 26191.066000, 1249.752036, 1249.752036, 0.000000, X, Y)
[Thu May 23 09:52:12 2013] Writing fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src16.gif
[Thu May 23 09:52:15 2013] ../../xmm0554750601/products/events/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src16_src.evt and ../../xmm0554750601/products/events/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src16_bgd.evt exist, delete to re-create
[Thu May 23 09:52:15 2013] Mean detx,y = (273.68, 1232.65) 
[Thu May 23 09:52:15 2013] ../../xmm0554750601/products/images/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src16_src.img and ../../xmm0554750601/products/images/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src16_bgd.img exist, delete to re-create
[Thu May 23 09:52:15 2013] ../../xmm0554750601/products/spectra/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src16_src_b10.pi.gz and ../../xmm0554750601/products/spectra/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src16_bgd.pi exist, delete to re-create
[Thu May 23 09:52:15 2013] Setting source spectrum file to fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Thu May 23 09:52:15 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Thu May 23 09:52:15 2013] ../../xmm0554750601/products/lightcurves/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src16_src.lc and ../../xmm0554750601/products/lightcurves/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src16_bgd.lc exist, delete to re-create
[Thu May 23 10:18:43 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 23 10:18:43 2013] rmf not generated due to insufficient counts
[Thu May 23 11:26:06 2013] Updating aperture counts using extracted products
[Thu May 23 11:26:06 2013] Total counts from fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 2007.00
[Thu May 23 11:26:06 2013] Total counts from fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src16_bgd.pi.gz = 2400.00
[Thu May 23 11:26:06 2013] Got source and background scale factors 1255132.000000, 3564444.000000
[Thu May 23 11:26:06 2013] User source parameters:
  Position = (289.2, 264.4) = 17 45 38.88 -29 1 25.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1161.9 +/- 45.8
  Background aperture counts = 845.1
  Rate = 0.03 +/- 0.001

[Thu May 23 11:26:06 2013] Updating counts from extracted products
[Thu May 23 11:26:06 2013] Set source signif. to 1161.90/29.07 = 39.97
[Thu May 23 11:26:11 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 23 11:26:11 2013] Using photon index=1.80, rate=0.0299, arf fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src16.arf
[Thu May 23 11:26:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 23 11:26:11 2013] Updating source flux to 5.8e-13
[Thu May 23 11:26:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 23 11:26:44 2013] xmm0554750601/analysis//spectral/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete