[Thu May 23 00:42:21 2013] Detection parameters:
  Position = (307.3, 294.0) = 17 45 32.90 -28 59 18.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 203.1 +/- 25.4
  Background counts = 125.9
  Rate = 0.005 +/- 0.0007

[Thu May 23 00:42:26 2013] Off-axis axis estimate = 0.72'
[Thu May 23 00:43:30 2013] Using EEF radius (= 6.79 ")to estimate initial spatial extent for simple fitting
[Thu May 23 00:43:30 2013] Initial guess for spatial extent in simple fitting = 6.79"
[Thu May 23 00:43:30 2013] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.942
[Thu May 23 00:43:30 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 6.79"
[Thu May 23 00:43:31 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src11.ximg exists
[Thu May 23 00:43:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src11.csv
[Thu May 23 00:43:31 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu May 23 00:43:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src11.csv
[Thu May 23 00:43:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:43:32 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu May 23 00:43:32 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu May 23 00:43:32 2013] Fit fullrun_mos2_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu May 23 00:44:26 2013] Spatial fit model total counts = 2142.170000, observed total counts = 2143.000000
[Thu May 23 00:44:26 2013] Offset between fit and detection position for source 14 = 1.152305 pixels
[Thu May 23 00:44:26 2013] 2072.857000 total counts/ 1820.440000 bgd. counts: snr = 5.916031
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 1.152305 pixels
  Position = (308.1, 294.8) = 17 45 32.63 -28 59 15.0
  Extent = 13.6 (13.5-27.1)", rotation angle = 0
  Source counts = 252.4 +/- 45.5
  Background counts = 1820.4
  Rate = 0.007 +/- 0.001
[Thu May 23 00:44:26 2013] Spatial fit model total counts = 2400.180000, observed total counts = 2397.000000
[Thu May 23 00:44:26 2013] Offset between fit and detection position for source 14 = 0.315376 pixels
[Thu May 23 00:44:26 2013] Warning, changing simple spatial fit ID from 11 to 17
[Thu May 23 00:44:26 2013] 2314.942000 total counts/ 2058.560000 bgd. counts: snr = 5.650746
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.315376 pixels
  Position = (308.1, 294.5) = 17 45 32.62 -28 59 16.4
  Extent = 13.5 (13.5-27.0)", rotation angle = 0
  Source counts = 256.4 +/- 48.1
  Background counts = 2058.6
  Rate = 0.007 +/- 0.001
[Thu May 23 00:44:26 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:44:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:44:26 2013] Assessing source extent using major axis lower bound
[Thu May 23 00:44:26 2013] Source does appear to be extended
[Thu May 23 00:44:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 00:44:26 2013] Source is confused with source 43
[Thu May 23 00:44:26 2013] Source is confused with source 41
[Thu May 23 00:44:55 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 23 00:44:55 2013] Initial guess for spatial extent in simple fitting = 13.52"
[Thu May 23 00:44:55 2013] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.941
[Thu May 23 00:44:55 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 13.52"
[Thu May 23 00:44:56 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src10.ximg exists
[Thu May 23 00:44:56 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu May 23 00:44:56 2013] Fit fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_src10 appears to have run properly
[Thu May 23 00:44:57 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu May 23 00:44:57 2013] fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu May 23 00:44:57 2013] Fit fullrun_mos2_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Thu May 23 00:45:44 2013] Warning, spatial fit 10 centroid is now closest to src. 38
[Thu May 23 00:45:44 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:45:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:45:44 2013] Assessing source extent using major axis lower bound
[Thu May 23 00:45:44 2013] Source does appear to be extended
[Thu May 23 00:45:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 09:52:12 2013] XMMSAS src. selection expression = ellipse(26757.512000, 25571.910000, 811.182023, 811.182023, 0.000000, X, Y)
[Thu May 23 09:52:12 2013] Not overwriting source region fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src14_src.reg
[Thu May 23 09:52:12 2013] Extracting stamp from image fullrun_mos2_xmm0554750601_pi300-10000_cl_sm2.00.img.gz, (261, 248) - (355, 341)
[Thu May 23 09:52:12 2013] XMMSAS bgd. selection expression = annulus(26757.512000, 25571.910000, 1351.970039, 2703.940078, X, Y) && !ellipse(24831.236000, 24127.048000, 663.937619, 437.536013, 67.520600, X, Y) && !ellipse(25684.712000, 24729.828000, 1081.576031, 1081.576031, 0.000000, X, Y) && !ellipse(23857.147491, 24485.550446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25401.762000, 25272.734000, 1023.880029, 1023.880029, 0.000000, X, Y) && !ellipse(23441.428314, 26042.135712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25092.569794, 26555.236053, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(25114.295898, 22956.354462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24368.922974, 25973.455414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26026.396698, 23018.174164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26485.198000, 25440.482000, 1995.984057, 1995.984057, 0.000000, X, Y) && !ellipse(26770.341217, 23123.159332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27833.334000, 24916.544000, 1155.240033, 1155.240033, 0.000000, X, Y) && !ellipse(26813.804000, 25752.450000, 935.560027, 935.560027, 0.000000, X, Y) && !ellipse(26765.413483, 23525.560883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25603.508942, 25668.397858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23916.171448, 22552.649292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28077.394000, 26811.188000, 1152.488033, 1152.488033, 0.000000, X, Y) && !ellipse(27256.426000, 26191.066000, 1249.752036, 1249.752036, 0.000000, X, Y)
[Thu May 23 09:52:12 2013] Writing fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src14.gif
[Thu May 23 09:52:15 2013] ../../xmm0554750601/products/events/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src14_src.evt and ../../xmm0554750601/products/events/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src14_bgd.evt exist, delete to re-create
[Thu May 23 09:52:15 2013] Mean detx,y = (2033.74, -1199.84) 
[Thu May 23 09:52:15 2013] ../../xmm0554750601/products/images/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src14_src.img and ../../xmm0554750601/products/images/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src14_bgd.img exist, delete to re-create
[Thu May 23 09:52:15 2013] ../../xmm0554750601/products/spectra/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src14_src_b10.pi.gz and ../../xmm0554750601/products/spectra/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src14_bgd.pi exist, delete to re-create
[Thu May 23 09:52:15 2013] Setting source spectrum file to fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Thu May 23 09:52:15 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Thu May 23 09:52:15 2013] ../../xmm0554750601/products/lightcurves/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src14_src.lc and ../../xmm0554750601/products/lightcurves/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src14_bgd.lc exist, delete to re-create
[Thu May 23 11:26:06 2013] Updating aperture counts using extracted products
[Thu May 23 11:26:06 2013] Total counts from fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 2230.00
[Thu May 23 11:26:06 2013] Total counts from fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src14_bgd.pi.gz = 1361.00
[Thu May 23 11:26:06 2013] Got source and background scale factors 2072000.000000, 2793600.000000
[Thu May 23 11:26:06 2013] User source parameters:
  Position = (308.1, 294.5) = 17 45 32.62 -28 59 16.4
  Extent = 13.5 (13.5-27.0)", rotation angle = 0
  Source aperture counts = 1220.6 +/- 48.2
  Background aperture counts = 1009.4
  Rate = 0.03 +/- 0.001

[Thu May 23 11:26:11 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 23 11:26:11 2013] Using photon index=1.80, rate=0.0066, arf fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src14.arf
[Thu May 23 11:26:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 23 11:26:11 2013] Updating source flux to 1.2e-13
[Thu May 23 11:26:31 2013] Flag c found in src. 14 procflags, skipping spectral fitting
[Thu May 23 11:26:44 2013] xmm0554750601/analysis//spectral/fullrun_mos2_xmm0554750601_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete