[Thu May 23 00:42:18 2013] Detection parameters:
  Position = (231.7, 239.0) = 17 45 57.97 -29 3 13.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.2 +/- 17.2
  Background counts = 84.5
  Rate = 0.003 +/- 0.0005

[Thu May 23 00:42:18 2013] Off-axis axis estimate = 6.48'
[Thu May 23 00:43:27 2013] Using EEF radius (= 9.67 ")to estimate initial spatial extent for simple fitting
[Thu May 23 00:43:27 2013] Initial guess for spatial extent in simple fitting = 9.67"
[Thu May 23 00:43:27 2013] source mask rpix=2.2, npix_max = 29, mask sum = 27, frac = 0.910
[Thu May 23 00:43:27 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 9.67"
[Thu May 23 00:43:28 2013] fullrun_mos1_xmm0554750601_pi300-10000_cl_pass0_src28.ximg exists
[Thu May 23 00:43:28 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554750601_pi300-10000_cl_pass0_src28.csv
[Thu May 23 00:43:28 2013] fullrun_mos1_xmm0554750601_pi300-10000_cl_pass0_src28_1.ximg exists
[Thu May 23 00:43:28 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554750601_pi300-10000_cl_pass0_src28.csv
[Thu May 23 00:43:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554750601_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554750601_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:43:29 2013] fullrun_mos1_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Thu May 23 00:43:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src28.csv
[Thu May 23 00:43:29 2013] fullrun_mos1_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Thu May 23 00:43:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src28.csv
[Thu May 23 00:43:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554750601_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:44:11 2013] Source 46 is offset by -5.762193 and 7.851835 pixels which is larger than
2 X fitted extent = 1.187832 x 8.891127, not incorporating fit results
[Thu May 23 00:44:11 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:44:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:44:11 2013] Assessing source extent using major
[Thu May 23 00:44:11 2013] Source does appear to be extended
[Thu May 23 00:44:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 00:44:53 2013] Using EEF radius (= 9.67 ")to estimate initial spatial extent for simple fitting
[Thu May 23 00:44:53 2013] Initial guess for spatial extent in simple fitting = 9.67"
[Thu May 23 00:44:53 2013] source mask rpix=2.2, npix_max = 29, mask sum = 27, frac = 0.910
[Thu May 23 00:44:53 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 9.67"
[Thu May 23 00:44:54 2013] fullrun_mos1_xmm0554750601_pi300-10000_cl_pass1_src25.ximg exists
[Thu May 23 00:44:54 2013] fullrun_mos1_xmm0554750601_pi300-10000_cl_pass1_src25_1.ximg exists
[Thu May 23 00:44:54 2013] Fit fullrun_mos1_xmm0554750601_pi300-10000_cl_pass1_src25 appears to have run properly
[Thu May 23 00:44:55 2013] fullrun_mos1_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Thu May 23 00:44:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src25.csv
[Thu May 23 00:44:55 2013] fullrun_mos1_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Thu May 23 00:44:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src25.csv
[Thu May 23 00:44:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554750601_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 00:45:30 2013] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 46 at 22.356569 pixels away
[Thu May 23 00:45:30 2013] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 46 at 29.278710 pixels away
[Thu May 23 00:45:30 2013] Vigneting correction estimate = 1.000000
[Thu May 23 00:45:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 23 00:45:30 2013] Assessing source extent using major
[Thu May 23 00:45:30 2013] Source does appear to be extended
[Thu May 23 00:45:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 23 09:52:04 2013] XMMSAS src. selection expression = ellipse(20109.341324, 20741.081650, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 23 09:52:04 2013] Not overwriting source region fullrun_mos1_xmm0554750601_pi300-10000_pass1_cl_src46_src.reg
[Thu May 23 09:52:04 2013] Extracting stamp from image fullrun_mos1_xmm0554750601_pi300-10000_cl_sm2.00.img.gz, (194, 201) - (269, 276)
[Thu May 23 09:52:04 2013] XMMSAS bgd. selection expression = annulus(20109.341324, 20741.081650, 1087.500000, 2175.000000, X, Y) && !ellipse(22495.085400, 21110.248200, 1362.960039, 1362.960039, 0.000000, X, Y)
[Thu May 23 09:52:04 2013] Writing fullrun_mos1_xmm0554750601_pi300-10000_pass1_cl_src46.gif
[Thu May 23 09:52:06 2013] ../../xmm0554750601/products/events/fullrun_mos1_xmm0554750601_pi300-10000_pass1_cl_src46_src.evt and ../../xmm0554750601/products/events/fullrun_mos1_xmm0554750601_pi300-10000_pass1_cl_src46_bgd.evt exist, delete to re-create
[Thu May 23 09:52:06 2013] Mean detx,y = (3389.76, 4654.97) 
[Thu May 23 09:52:06 2013] ../../xmm0554750601/products/images/fullrun_mos1_xmm0554750601_pi300-10000_pass1_cl_src46_src.img and ../../xmm0554750601/products/images/fullrun_mos1_xmm0554750601_pi300-10000_pass1_cl_src46_bgd.img exist, delete to re-create
[Thu May 23 09:52:06 2013] ../../xmm0554750601/products/spectra/fullrun_mos1_xmm0554750601_pi300-10000_pass1_cl_src46_src_b10.pi.gz and ../../xmm0554750601/products/spectra/fullrun_mos1_xmm0554750601_pi300-10000_pass1_cl_src46_bgd.pi exist, delete to re-create
[Thu May 23 09:52:06 2013] Setting source spectrum file to fullrun_mos1_xmm0554750601_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Thu May 23 09:52:06 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0554750601_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Thu May 23 09:52:06 2013] ../../xmm0554750601/products/lightcurves/fullrun_mos1_xmm0554750601_pi300-10000_pass1_cl_src46_src.lc and ../../xmm0554750601/products/lightcurves/fullrun_mos1_xmm0554750601_pi300-10000_pass1_cl_src46_bgd.lc exist, delete to re-create
[Thu May 23 09:52:11 2013] Not generating rmf since there are only 94 counts
[Thu May 23 09:52:11 2013] rmf not generated due to insufficient counts
[Thu May 23 09:52:11 2013] fullrun_mos1_xmm0554750601_pi300-10000_pass1_cl_src46.arf exists, delete to re-create
[Thu May 23 11:26:02 2013] Updating aperture counts using extracted products
[Thu May 23 11:26:02 2013] Total counts from fullrun_mos1_xmm0554750601_pi300-10000_pass1_cl_src46_src_b10.pi.gz = 734.00
[Thu May 23 11:26:02 2013] Total counts from fullrun_mos1_xmm0554750601_pi300-10000_pass1_cl_src46_bgd.pi.gz = 3618.00
[Thu May 23 11:26:02 2013] Got source and background scale factors 1116856.000000, 7784548.000000
[Thu May 23 11:26:02 2013] User source parameters:
  Position = (231.7, 239.0) = 17 45 57.97 -29 3 13.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 214.9 +/- 28.1
  Background aperture counts = 519.1
  Rate = 0.006 +/- 0.0007

[Thu May 23 11:26:02 2013] Updating counts from extracted products
[Thu May 23 11:26:02 2013] Set source signif. to 214.92/22.78 = 9.43
[Thu May 23 11:26:04 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 23 11:26:04 2013] Using photon index=1.80, rate=0.00554, arf fullrun_mos1_xmm0554750601_pi300-10000_pass1_cl_src46.arf
[Thu May 23 11:26:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 23 11:26:04 2013] Updating source flux to 1.1e-13
[Thu May 23 11:26:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 23 11:26:31 2013] xmm0554750601/analysis//spectral/fullrun_mos1_xmm0554750601_pi300-10000_pass1_cl_src46_pl.csv not found, spectral fit skipped or did not complete