[Tue Aug 21 10:42:12 2012] Detection parameters:
  Position = (307.3, 265.1) = 17 45 32.86 -29 1 17.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 178.8 +/- 23.2
  Background counts = 335.1
  Rate = 0.007 +/- 0.0009

[Tue Aug 21 10:42:13 2012] Off-axis axis estimate = 2.50'
[Tue Aug 21 10:51:10 2012] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 10:51:10 2012] Initial guess for spatial extent in simple fitting = 7.68"
[Tue Aug 21 10:51:10 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.974
[Tue Aug 21 10:51:10 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 7.68"
[Tue Aug 21 15:11:58 2012] fullrun_pn_xmm0554750501_pi300-10000_cl_pass0_src42.ximg exists
[Tue Aug 21 15:11:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554750501_pi300-10000_cl_pass0_src42.csv
[Tue Aug 21 15:11:58 2012] fullrun_pn_xmm0554750501_pi300-10000_cl_pass0_src42_1.ximg exists
[Tue Aug 21 15:11:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554750501_pi300-10000_cl_pass0_src42.csv
[Tue Aug 21 15:11:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554750501_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554750501_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 15:12:01 2012] fullrun_pn_xmm0554750501_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Tue Aug 21 15:12:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554750501_pi300-10000_cl_pass0_tfrozen_src42.csv
[Tue Aug 21 15:12:01 2012] fullrun_pn_xmm0554750501_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Tue Aug 21 15:12:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554750501_pi300-10000_cl_pass0_tfrozen_src42.csv
[Tue Aug 21 15:12:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554750501_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554750501_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 19:32:44 2012] Warning, spatial fit 42 centroid is now closest to src. 24
[Tue Aug 21 19:32:44 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 19:32:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 19:32:44 2012] Assessing source extent using major
[Tue Aug 21 19:32:44 2012] Source does appear to be extended
[Tue Aug 21 19:32:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 19:33:18 2012] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 19:33:18 2012] Initial guess for spatial extent in simple fitting = 7.68"
[Tue Aug 21 19:33:18 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.974
[Tue Aug 21 19:33:18 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 7.68"
[Tue Aug 21 21:29:29 2012] fullrun_pn_xmm0554750501_pi300-10000_cl_pass1_src32.ximg exists
[Tue Aug 21 21:29:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554750501_pi300-10000_cl_pass1_src32.csv
[Tue Aug 21 21:29:29 2012] fullrun_pn_xmm0554750501_pi300-10000_cl_pass1_src32_1.ximg exists
[Tue Aug 21 21:29:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554750501_pi300-10000_cl_pass1_src32.csv
[Tue Aug 21 21:29:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554750501_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554750501_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 21:29:30 2012] fullrun_pn_xmm0554750501_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Tue Aug 21 21:29:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554750501_pi300-10000_cl_pass1_tfrozen_src32.csv
[Tue Aug 21 21:29:30 2012] fullrun_pn_xmm0554750501_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Tue Aug 21 21:29:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554750501_pi300-10000_cl_pass1_tfrozen_src32.csv
[Tue Aug 21 21:29:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554750501_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554750501_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 00:54:33 2012] Source 50 is offset by 7.323899 and -0.086592 pixels which is larger than
2 X fitted extent = 2.535076 x 2.535076, not incorporating fit results
[Wed Aug 22 00:54:33 2012] Source 50 is offset by 7.897324 and 0.151396 pixels which is larger than
2 X fitted extent = 1.528699 x 1.528699, not incorporating fit results
[Wed Aug 22 00:54:33 2012] Warning: source 53 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 50 at 34.454843 pixels away
[Wed Aug 22 00:54:33 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 00:54:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 00:54:33 2012] Assessing source extent using major
[Wed Aug 22 00:54:33 2012] Source does appear to be extended
[Wed Aug 22 00:54:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 00:55:04 2012] XMMSAS src. selection expression = ellipse(26683.349182, 23014.077454, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 22 00:55:04 2012] Writing source region out to fullrun_pn_xmm0554750501_pi300-10000_pass1_cl_src50_src.reg
[Wed Aug 22 00:55:04 2012] Extracting stamp from image fullrun_pn_xmm0554750501_pi300-10000_cl_sm2.00.img.gz, (270, 228) - (345, 303)
[Wed Aug 22 00:55:04 2012] XMMSAS bgd. selection expression = annulus(26683.349182, 23014.077454, 1087.500000, 2175.000000, X, Y) && !ellipse(24831.283960, 24165.318200, 863.560025, 863.560025, 0.000000, X, Y) && !ellipse(23941.724000, 24475.602000, 1421.728041, 1421.728041, 0.000000, X, Y) && !ellipse(24990.770000, 24194.367800, 3439.632099, 3439.632099, 0.000000, X, Y) && !ellipse(24378.587280, 26042.414490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25437.983795, 25689.072571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26475.348877, 25271.032898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25349.374847, 22571.117676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27234.429718, 25522.174774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27283.561035, 25079.743347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23677.176331, 22838.957031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26242.431122, 22315.313568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24245.668549, 22057.061523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28208.631653, 25432.079010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27788.064392, 24490.977325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30166.260000, 20752.902800, 1489.568043, 1489.568043, 0.000000, X, Y)
[Wed Aug 22 00:55:04 2012] Writing fullrun_pn_xmm0554750501_pi300-10000_pass1_cl_src50.gif
[Wed Aug 22 01:50:50 2012] Mean detx,y = (-1526.88, -1516.71) 
[Wed Aug 22 01:50:55 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 01:51:18 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 22 01:51:18 2012] Setting source spectrum file to fullrun_pn_xmm0554750501_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Wed Aug 22 01:51:18 2012] Setting bgd. spectrum file to fullrun_pn_xmm0554750501_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Wed Aug 22 10:39:46 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug 22 10:39:46 2012] rmf not generated due to insufficient counts
[Wed Aug 22 17:11:38 2012] Updating aperture counts using extracted products
[Wed Aug 22 17:11:38 2012] Error reading totcts from fullrun_pn_xmm0554750501_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Wed Aug 22 17:11:40 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 17:11:40 2012] Using photon index=1.80, rate=0.00693, arf fullrun_pn_xmm0554750501_pi300-10000_pass1_cl_src50.arf
[Wed Aug 22 17:11:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 17:11:40 2012] Updating source flux to 2.5e-14
[Wed Aug 22 17:24:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting