[Tue Aug 21 10:42:09 2012] Detection parameters:
  Position = (292.9, 295.8) = 17 45 37.61 -28 59 9.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 389.9 +/- 38.6
  Background counts = 404.8
  Rate = 0.01 +/- 0.001

[Tue Aug 21 10:42:13 2012] Off-axis axis estimate = 0.44'
[Tue Aug 21 10:51:10 2012] Using EEF radius (= 6.65 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 10:51:10 2012] Initial guess for spatial extent in simple fitting = 6.65"
[Tue Aug 21 10:51:10 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.972
[Tue Aug 21 10:51:10 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 6.65"
[Tue Aug 21 15:11:58 2012] fullrun_pn_xmm0554750501_pi300-10000_cl_pass0_src16.ximg exists
[Tue Aug 21 15:11:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554750501_pi300-10000_cl_pass0_src16.csv
[Tue Aug 21 15:11:58 2012] fullrun_pn_xmm0554750501_pi300-10000_cl_pass0_src16_1.ximg exists
[Tue Aug 21 15:11:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554750501_pi300-10000_cl_pass0_src16.csv
[Tue Aug 21 15:11:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554750501_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554750501_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 15:12:00 2012] fullrun_pn_xmm0554750501_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Tue Aug 21 15:12:00 2012] fullrun_pn_xmm0554750501_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Tue Aug 21 15:12:00 2012] Fit fullrun_pn_xmm0554750501_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Tue Aug 21 19:32:44 2012] Source 19 is offset by 6.061906 and 4.947984 pixels which is larger than
2 X fitted extent = 4.906069 x 4.906069, not incorporating fit results
[Tue Aug 21 19:32:44 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 19:32:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 19:32:44 2012] Assessing source extent using major
[Tue Aug 21 19:32:44 2012] Source does appear to be extended
[Tue Aug 21 19:32:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 19:33:18 2012] Using EEF radius (= 6.65 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 19:33:18 2012] Initial guess for spatial extent in simple fitting = 6.65"
[Tue Aug 21 19:33:18 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.972
[Tue Aug 21 19:33:18 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 6.65"
[Tue Aug 21 21:29:29 2012] fullrun_pn_xmm0554750501_pi300-10000_cl_pass1_src15.ximg exists
[Tue Aug 21 21:29:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554750501_pi300-10000_cl_pass1_src15.csv
[Tue Aug 21 21:29:29 2012] fullrun_pn_xmm0554750501_pi300-10000_cl_pass1_src15_1.ximg exists
[Tue Aug 21 21:29:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554750501_pi300-10000_cl_pass1_src15.csv
[Tue Aug 21 21:29:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554750501_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554750501_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 21:29:29 2012] fullrun_pn_xmm0554750501_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Tue Aug 21 21:29:29 2012] fullrun_pn_xmm0554750501_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Tue Aug 21 21:29:29 2012] Fit fullrun_pn_xmm0554750501_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Wed Aug 22 00:54:33 2012] Source 19 is offset by 6.061906 and 4.947984 pixels which is larger than
2 X fitted extent = 5.069150 x 5.069150, not incorporating fit results
[Wed Aug 22 00:54:33 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 00:54:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 00:54:33 2012] Assessing source extent using major
[Wed Aug 22 00:54:33 2012] Source does appear to be extended
[Wed Aug 22 00:54:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 00:55:04 2012] XMMSAS src. selection expression = ellipse(25437.983795, 25689.072571, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 22 00:55:04 2012] Writing source region out to fullrun_pn_xmm0554750501_pi300-10000_pass1_cl_src19_src.reg
[Wed Aug 22 00:55:04 2012] Extracting stamp from image fullrun_pn_xmm0554750501_pi300-10000_cl_sm2.00.img.gz, (255, 258) - (330, 333)
[Wed Aug 22 00:55:04 2012] XMMSAS bgd. selection expression = annulus(25437.983795, 25689.072571, 1087.500000, 2175.000000, X, Y) && !ellipse(24831.283960, 24165.318200, 863.560025, 863.560025, 0.000000, X, Y) && !ellipse(23941.724000, 24475.602000, 1421.728041, 1421.728041, 0.000000, X, Y) && !ellipse(24990.770000, 24194.367800, 3439.632099, 3439.632099, 0.000000, X, Y) && !ellipse(23397.870400, 26505.624200, 481.808814, 481.808814, 0.000000, X, Y) && !ellipse(24378.587280, 26042.414490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23562.562000, 26151.750000, 781.293622, 781.293622, 0.000000, X, Y) && !ellipse(26475.348877, 25271.032898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24213.964844, 26560.235474, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27234.429718, 25522.174774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27283.561035, 25079.743347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23677.176331, 22838.957031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26683.349182, 23014.077454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27946.625800, 26768.426000, 1171.736034, 551.754416, 339.198000, X, Y) && !ellipse(26836.265594, 26503.832031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25727.347473, 26282.962799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27565.230438, 26311.767212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28208.631653, 25432.079010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27788.064392, 24490.977325, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 22 00:55:04 2012] Writing fullrun_pn_xmm0554750501_pi300-10000_pass1_cl_src19.gif
[Wed Aug 22 01:33:24 2012] Mean detx,y = (-533.87, 1228.28) 
[Wed Aug 22 01:33:27 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 01:33:41 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 22 01:33:41 2012] Setting source spectrum file to fullrun_pn_xmm0554750501_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Wed Aug 22 01:33:41 2012] Setting bgd. spectrum file to fullrun_pn_xmm0554750501_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Wed Aug 22 10:10:25 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug 22 10:10:25 2012] rmf not generated due to insufficient counts
[Wed Aug 22 17:11:38 2012] Updating aperture counts using extracted products
[Wed Aug 22 17:11:38 2012] Error reading totcts from fullrun_pn_xmm0554750501_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Wed Aug 22 17:11:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 17:11:39 2012] Using photon index=1.80, rate=0.011, arf fullrun_pn_xmm0554750501_pi300-10000_pass1_cl_src19.arf
[Wed Aug 22 17:11:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 17:11:39 2012] Updating source flux to 2.9e-14
[Wed Aug 22 17:24:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting