[Tue Aug 21 10:43:53 2012] Detection parameters:
  Position = (248.9, 333.9) = 17 45 52.20 -28 56 25.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 170.7 +/- 23.8
  Background counts = 134.1
  Rate = 0.005 +/- 0.0006

[Tue Aug 21 10:43:54 2012] Off-axis axis estimate = 4.41'
[Tue Aug 21 17:34:46 2012] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 17:34:46 2012] Initial guess for spatial extent in simple fitting = 8.64"
[Tue Aug 21 17:34:46 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.012
[Tue Aug 21 17:34:46 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 8.64"
[Tue Aug 21 19:32:26 2012] fullrun_mos2_xmm0554750501_pi300-10000_cl_pass0_src15.ximg exists
[Tue Aug 21 19:32:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750501_pi300-10000_cl_pass0_src15.csv
[Tue Aug 21 19:32:26 2012] fullrun_mos2_xmm0554750501_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue Aug 21 19:32:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750501_pi300-10000_cl_pass0_src15.csv
[Tue Aug 21 19:32:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554750501_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554750501_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 19:32:27 2012] fullrun_mos2_xmm0554750501_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue Aug 21 19:32:27 2012] fullrun_mos2_xmm0554750501_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Aug 21 19:32:27 2012] Fit fullrun_mos2_xmm0554750501_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Tue Aug 21 19:33:04 2012] Spatial fit model total counts = 2018.680000, observed total counts = 2018.000000
[Tue Aug 21 19:33:04 2012] Offset between fit and detection position for source 34 = 3.246335 pixels
[Tue Aug 21 19:33:04 2012] 1960.399000 total counts/ 1491.930000 bgd. counts: snr = 12.128487
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 3.246335 pixels
  Position = (249.9, 330.8) = 17 45 51.89 -28 56 39.1
  Extent = 16.7 (15.6-17.3)", rotation angle = 0
  Source counts = 468.5 +/- 44.3
  Background counts = 1491.9
  Rate = 0.01 +/- 0.001
[Tue Aug 21 19:33:04 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 19:33:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 19:33:04 2012] Assessing source extent using major axis lower bound
[Tue Aug 21 19:33:04 2012] Source does appear to be extended
[Tue Aug 21 19:33:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 19:33:04 2012] Source is confused with source 35
[Tue Aug 21 19:33:04 2012] Source is confused with source 38
[Tue Aug 21 23:11:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 21 23:11:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 21 23:11:00 2012] Initial guess for spatial extent in simple fitting = 16.72"
[Tue Aug 21 23:11:00 2012] source mask rpix=3.8, npix_max = 75, mask sum = 72, frac = 0.954
[Tue Aug 21 23:11:00 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 16.72"
[Wed Aug 22 00:54:19 2012] fullrun_mos2_xmm0554750501_pi300-10000_cl_pass1_src15.ximg exists
[Wed Aug 22 00:54:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750501_pi300-10000_cl_pass1_src15.csv
[Wed Aug 22 00:54:19 2012] fullrun_mos2_xmm0554750501_pi300-10000_cl_pass1_src15_1.ximg exists
[Wed Aug 22 00:54:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750501_pi300-10000_cl_pass1_src15.csv
[Wed Aug 22 00:54:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554750501_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554750501_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 00:54:20 2012] fullrun_mos2_xmm0554750501_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Wed Aug 22 00:54:20 2012] fullrun_mos2_xmm0554750501_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Wed Aug 22 00:54:20 2012] Fit fullrun_mos2_xmm0554750501_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Wed Aug 22 00:54:49 2012] Warning, spatial fit 15 centroid is now closest to src. 38
[Wed Aug 22 00:54:49 2012] Spatial fit model total counts = 1913.050000, observed total counts = 1912.000000
[Wed Aug 22 00:54:49 2012] Offset between fit and detection position for source 34 = 2.054964 pixels
[Wed Aug 22 00:54:49 2012] Warning, changing simple spatial fit ID from 15 to 38
[Wed Aug 22 00:54:49 2012] 1898.620000 total counts/ 1606.800000 bgd. counts: snr = 7.280046
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 2.054964 pixels
  Position = (249.8, 328.7) = 17 45 51.90 -28 56 48.0
  Extent = 16.8 (16.2-33.6)", rotation angle = 0
  Source counts = 291.8 +/- 43.6
  Background counts = 1606.8
  Rate = 0.007 +/- 0.001
[Wed Aug 22 00:54:49 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 00:54:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 00:54:49 2012] Assessing source extent using major axis lower bound
[Wed Aug 22 00:54:49 2012] Source does appear to be extended
[Wed Aug 22 00:54:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 15:18:43 2012] XMMSAS src. selection expression = ellipse(21685.069800, 28548.454000, 1008.312029, 1008.312029, 0.000000, X, Y)
[Wed Aug 22 15:18:43 2012] Writing source region out to fullrun_mos2_xmm0554750501_pi300-10000_pass1_cl_src34_src.reg
[Wed Aug 22 15:18:43 2012] Extracting stamp from image fullrun_mos2_xmm0554750501_pi300-10000_cl_sm2.00.img.gz, (192, 271) - (308, 387)
[Wed Aug 22 15:18:43 2012] XMMSAS bgd. selection expression = annulus(21685.069800, 28548.454000, 1680.520048, 3361.040097, X, Y) && !ellipse(24941.308000, 24196.806400, 1146.648033, 1146.648033, 0.000000, X, Y) && !ellipse(23853.433105, 24487.778015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23388.105400, 26513.500200, 533.589615, 389.065611, 342.064700, X, Y) && !ellipse(23519.956116, 25785.816528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24278.949341, 26118.250092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24834.508000, 24709.662000, 2139.072062, 2139.072062, 0.000000, X, Y) && !ellipse(17631.224594, 24833.486725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26604.036000, 25114.250000, 2304.528066, 2304.528066, 0.000000, X, Y) && !ellipse(18737.219528, 31163.535889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21095.124580, 29236.183600, 800.624023, 800.624023, 0.000000, X, Y) && !ellipse(19256.868000, 28587.058000, 1538.568044, 1538.568044, 0.000000, X, Y) && !ellipse(21806.120102, 28273.029388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18775.984283, 28663.146118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21449.041229, 29966.072540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25820.518000, 25762.888000, 1091.400031, 1091.400031, 0.000000, X, Y)
[Wed Aug 22 15:18:43 2012] Writing fullrun_mos2_xmm0554750501_pi300-10000_pass1_cl_src34.gif
[Wed Aug 22 15:36:45 2012] Mean detx,y = (-2930.87, -4495.70) 
[Wed Aug 22 15:36:46 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 15:37:13 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 22 15:37:13 2012] Setting source spectrum file to fullrun_mos2_xmm0554750501_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Wed Aug 22 15:37:13 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0554750501_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Wed Aug 22 17:11:43 2012] Updating aperture counts using extracted products
[Wed Aug 22 17:11:43 2012] Error reading totcts from fullrun_mos2_xmm0554750501_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Wed Aug 22 17:11:45 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 17:11:45 2012] Using photon index=1.80, rate=0.00663, arf fullrun_mos2_xmm0554750501_pi300-10000_pass1_cl_src34.arf
[Wed Aug 22 17:11:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 17:11:45 2012] Updating source flux to 7.4e-14
[Wed Aug 22 17:18:59 2012] Flag c found in src. 34 procflags, skipping spectral fitting