[Tue Aug 21 10:43:51 2012] Detection parameters:
  Position = (274.7, 282.0) = 17 45 43.65 -29 0 10.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1849.6 +/- 57.9
  Background counts = 196.8
  Rate = 0.05 +/- 0.001

[Tue Aug 21 10:43:54 2012] Off-axis axis estimate = 2.09'
[Tue Aug 21 17:34:46 2012] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 17:34:46 2012] Initial guess for spatial extent in simple fitting = 7.47"
[Tue Aug 21 17:34:46 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.813
[Tue Aug 21 17:34:46 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.47"
[Tue Aug 21 19:32:25 2012] fullrun_mos2_xmm0554750501_pi300-10000_cl_pass0_src3.ximg exists
[Tue Aug 21 19:32:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750501_pi300-10000_cl_pass0_src3.csv
[Tue Aug 21 19:32:25 2012] fullrun_mos2_xmm0554750501_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Aug 21 19:32:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750501_pi300-10000_cl_pass0_src3.csv
[Tue Aug 21 19:32:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554750501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554750501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 19:32:26 2012] fullrun_mos2_xmm0554750501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Aug 21 19:32:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Aug 21 19:32:26 2012] fullrun_mos2_xmm0554750501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Aug 21 19:32:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Aug 21 19:32:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554750501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554750501_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 21 19:33:04 2012] Spatial fit model total counts = 9284.380000, observed total counts = 8260.000000
[Tue Aug 21 19:33:04 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Aug 21 19:33:04 2012] Vigneting correction estimate = 1.000000
[Tue Aug 21 19:33:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 21 19:33:04 2012] Assessing source extent using major
[Tue Aug 21 19:33:04 2012] Source does appear to be extended
[Tue Aug 21 19:33:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 21 23:11:00 2012] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Tue Aug 21 23:11:00 2012] Initial guess for spatial extent in simple fitting = 7.47"
[Tue Aug 21 23:11:00 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.813
[Tue Aug 21 23:11:00 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.47"
[Wed Aug 22 00:54:19 2012] fullrun_mos2_xmm0554750501_pi300-10000_cl_pass1_src3.ximg exists
[Wed Aug 22 00:54:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750501_pi300-10000_cl_pass1_src3.csv
[Wed Aug 22 00:54:19 2012] fullrun_mos2_xmm0554750501_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Aug 22 00:54:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750501_pi300-10000_cl_pass1_src3.csv
[Wed Aug 22 00:54:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554750501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554750501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 00:54:20 2012] fullrun_mos2_xmm0554750501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Aug 22 00:54:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750501_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed Aug 22 00:54:20 2012] fullrun_mos2_xmm0554750501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Aug 22 00:54:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554750501_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed Aug 22 00:54:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554750501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554750501_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 22 00:54:49 2012] Spatial fit model total counts = 9269.850000, observed total counts = 8260.000000
[Wed Aug 22 00:54:49 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug 22 00:54:49 2012] Vigneting correction estimate = 1.000000
[Wed Aug 22 00:54:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 22 00:54:49 2012] Assessing source extent using major
[Wed Aug 22 00:54:49 2012] Source does appear to be extended
[Wed Aug 22 00:54:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 22 00:54:49 2012] Source is confused with source 19
[Wed Aug 22 15:18:42 2012] Counts = 1849.600464, rescaling region sizes by 2.000000
[Wed Aug 22 15:18:42 2012] XMMSAS src. selection expression = ellipse(23853.433105, 24487.778015, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Aug 22 15:18:42 2012] Writing source region out to fullrun_mos2_xmm0554750501_pi300-10000_pass1_cl_src2_src.reg
[Wed Aug 22 15:18:42 2012] Extracting stamp from image fullrun_mos2_xmm0554750501_pi300-10000_cl_sm2.00.img.gz, (200, 207) - (350, 357)
[Wed Aug 22 15:18:42 2012] XMMSAS bgd. selection expression = annulus(23853.433105, 24487.778015, 4350.000000, 8700.000000, X, Y) && !ellipse(24941.308000, 24196.806400, 1146.648033, 1146.648033, 0.000000, X, Y) && !ellipse(25341.659332, 24239.862000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27457.579620, 16222.847046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23388.105400, 26513.500200, 533.589615, 389.065611, 342.064700, X, Y) && !ellipse(23519.956116, 25785.816528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24278.949341, 26118.250092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24722.055145, 19341.757751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25880.703800, 28730.814400, 314.259209, 314.259209, 0.000000, X, Y) && !ellipse(30790.573303, 16982.213303, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21703.730225, 32846.314697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24834.508000, 24709.662000, 2139.072062, 2139.072062, 0.000000, X, Y) && !ellipse(25362.975140, 22513.957600, 558.008016, 558.008016, 0.000000, X, Y) && !ellipse(26551.694200, 25538.023000, 865.488025, 865.488025, 0.000000, X, Y) && !ellipse(21685.069800, 28548.454000, 1344.416039, 1344.416039, 0.000000, X, Y) && !ellipse(26030.408447, 23016.156342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26961.266000, 25449.581000, 1111.216032, 1111.216032, 0.000000, X, Y) && !ellipse(19770.769333, 21169.239639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17631.224594, 24833.486725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26604.036000, 25114.250000, 2304.528066, 2304.528066, 0.000000, X, Y) && !ellipse(18737.219528, 31163.535889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16643.479355, 32205.130432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21095.124580, 29236.183600, 800.624023, 800.624023, 0.000000, X, Y) && !ellipse(23821.110779, 18782.579376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21580.274017, 15405.063507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14424.578445, 22031.562622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14488.257996, 25116.831451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19256.868000, 28587.058000, 1538.568044, 1538.568044, 0.000000, X, Y) && !ellipse(30554.389862, 19737.155334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27704.537170, 26407.430573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21806.120102, 28273.029388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15758.453600, 27178.619600, 752.371222, 752.371222, 0.000000, X, Y) && !ellipse(18775.984283, 28663.146118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21689.330673, 20577.006149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23738.640259, 23020.407043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21449.041229, 29966.072540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25820.518000, 25762.888000, 1091.400031, 1091.400031, 0.000000, X, Y) && !ellipse(27317.888000, 26240.112000, 1152.264033, 1152.264033, 0.000000, X, Y)
[Wed Aug 22 15:18:42 2012] Writing fullrun_mos2_xmm0554750501_pi300-10000_pass1_cl_src2.gif
[Wed Aug 22 15:28:06 2012] Mean detx,y = (-731.50, -267.01) 
[Wed Aug 22 15:28:07 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 22 15:31:59 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 22 15:31:59 2012] Setting source spectrum file to fullrun_mos2_xmm0554750501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Aug 22 15:31:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0554750501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Aug 22 15:55:09 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug 22 15:55:09 2012] rmf not generated due to insufficient counts
[Wed Aug 22 17:11:42 2012] Updating aperture counts using extracted products
[Wed Aug 22 17:11:43 2012] Error reading totcts from fullrun_mos2_xmm0554750501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Aug 22 17:11:44 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug 22 17:11:44 2012] Using photon index=1.80, rate=0.0451, arf fullrun_mos2_xmm0554750501_pi300-10000_pass1_cl_src2.arf
[Wed Aug 22 17:11:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug 22 17:11:45 2012] Updating source flux to 4.1e-13
[Wed Aug 22 17:18:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting