[Wed May 29 05:32:22 2013] Detection parameters:
  Position = (274.5, 280.4) = 4 53 39.46 -42 16 26.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.8 +/- 15.2
  Background counts = 41.9
  Rate = 0.004 +/- 0.0006

[Wed May 29 05:32:23 2013] Off-axis axis estimate = 2.18'
[Wed May 29 05:32:44 2013] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Wed May 29 05:32:44 2013] Initial guess for spatial extent in simple fitting = 7.52"
[Wed May 29 05:32:44 2013] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.259
[Wed May 29 05:32:44 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 7.52"
[Wed May 29 05:32:46 2013] fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_src31.ximg exists
[Wed May 29 05:32:46 2013] fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_src31_1.ximg exists
[Wed May 29 05:32:46 2013] Fit fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_src31 appears to have run properly
[Wed May 29 05:32:47 2013] fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Wed May 29 05:32:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src31.csv
[Wed May 29 05:32:47 2013] fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Wed May 29 05:32:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src31.csv
[Wed May 29 05:32:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 05:32:58 2013] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 13.996732 pixels away
[Wed May 29 05:32:58 2013] Vigneting correction estimate = 1.000000
[Wed May 29 05:32:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 05:32:58 2013] Assessing source extent using major
[Wed May 29 05:32:58 2013] Source does appear to be extended
[Wed May 29 05:32:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 05:33:15 2013] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Wed May 29 05:33:15 2013] Initial guess for spatial extent in simple fitting = 7.52"
[Wed May 29 05:33:15 2013] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.259
[Wed May 29 05:33:15 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 7.52"
[Wed May 29 05:33:16 2013] fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_src30.ximg exists
[Wed May 29 05:33:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_src30.csv
[Wed May 29 05:33:16 2013] fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_src30_1.ximg exists
[Wed May 29 05:33:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_src30.csv
[Wed May 29 05:33:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 05:33:17 2013] fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Wed May 29 05:33:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src30.csv
[Wed May 29 05:33:17 2013] fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Wed May 29 05:33:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src30.csv
[Wed May 29 05:33:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 05:33:28 2013] Source 32 is offset by 5.819125 and -6.428994 pixels which is larger than
2 X fitted extent = 0.865618 x 0.865618, not incorporating fit results
[Wed May 29 05:33:28 2013] Vigneting correction estimate = 1.000000
[Wed May 29 05:33:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 05:33:28 2013] Assessing source extent using major
[Wed May 29 05:33:28 2013] Source does appear to be extended
[Wed May 29 05:33:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 05:33:45 2013] XMMSAS src. selection expression = ellipse(23832.877869, 24342.335510, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 05:33:45 2013] Not overwriting source region fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src32_src.reg
[Wed May 29 05:33:45 2013] Extracting stamp from image fullrun_pn_xmm0554740801_pi300-10000_cl_sm2.00.img.gz, (237, 243) - (312, 318)
[Wed May 29 05:33:45 2013] XMMSAS bgd. selection expression = annulus(23832.877869, 24342.335510, 1087.500000, 2175.000000, X, Y) && !ellipse(25269.401639, 25453.054809, 489.030952, 432.147360, 3.814715, X, Y) && !ellipse(26028.652000, 24396.566800, 687.712020, 288.251208, 80.858427, X, Y)
[Wed May 29 05:33:45 2013] Writing fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src32.gif
[Wed May 29 05:35:24 2013] Mean detx,y = (-3178.38, 2909.81) 
[Wed May 29 05:35:27 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 05:35:50 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 05:35:50 2013] Setting source spectrum file to fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Wed May 29 05:35:50 2013] Setting bgd. spectrum file to fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Wed May 29 06:01:55 2013] Not generating rmf since there are only 96 counts
[Wed May 29 06:01:55 2013] rmf not generated due to insufficient counts
[Wed May 29 06:32:21 2013] Updating aperture counts using extracted products
[Wed May 29 06:32:21 2013] Total counts from fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src32_src_b10.pi.gz = 275.00
[Wed May 29 06:32:21 2013] Total counts from fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src32_bgd.pi.gz = 1415.00
[Wed May 29 06:32:22 2013] Got source and background scale factors 1153958.000000, 8879505.000000
[Wed May 29 06:32:22 2013] User source parameters:
  Position = (274.5, 280.4) = 4 53 39.46 -42 16 26.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 91.1 +/- 17.6
  Background aperture counts = 183.9
  Rate = 0.003 +/- 0.0007

[Wed May 29 06:32:22 2013] Updating counts from extracted products
[Wed May 29 06:32:22 2013] Set source signif. to 91.11/13.56 = 6.72
[Wed May 29 06:32:24 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 06:32:24 2013] Using photon index=1.80, rate=0.00341, arf fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src32.arf
[Wed May 29 06:32:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 06:32:24 2013] Updating source flux to 1.1e-14
[Wed May 29 06:32:37 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 06:32:41 2013] xmm0554740801/analysis//spectral/fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src32_pl.csv not found, spectral fit skipped or did not complete