[Wed May 29 05:32:22 2013] Detection parameters:
  Position = (244.9, 354.0) = 4 53 51.05 -42 11 6.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 150.5 +/- 16.8
  Background counts = 41.1
  Rate = 0.008 +/- 0.0009

[Wed May 29 05:32:23 2013] Off-axis axis estimate = 5.60'
[Wed May 29 05:32:44 2013] Using EEF radius (= 9.23 ")to estimate initial spatial extent for simple fitting
[Wed May 29 05:32:44 2013] Initial guess for spatial extent in simple fitting = 9.23"
[Wed May 29 05:32:44 2013] source mask rpix=2.1, npix_max = 27, mask sum = 23, frac = 0.837
[Wed May 29 05:32:44 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 9.23"
[Wed May 29 05:32:46 2013] fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_src15.ximg exists
[Wed May 29 05:32:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_src15.csv
[Wed May 29 05:32:46 2013] fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_src15_1.ximg exists
[Wed May 29 05:32:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_src15.csv
[Wed May 29 05:32:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 05:32:47 2013] fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Wed May 29 05:32:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src15.csv
[Wed May 29 05:32:47 2013] fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Wed May 29 05:32:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src15.csv
[Wed May 29 05:32:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 05:32:58 2013] Spatial fit model total counts = 598.370000, observed total counts = 588.000000
[Wed May 29 05:32:58 2013] Offset between fit and detection position for source 16 = 0.361827 pixels
[Wed May 29 05:32:58 2013] Warning, changing simple spatial fit ID from 15 to 14
[Wed May 29 05:32:58 2013] 596.914600 total counts/ 545.403000 bgd. counts: snr = 2.205699
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.361827 pixels
  Position = (244.9, 354.4) = 4 53 51.03 -42 11 6.2
  Extent = 3.4 (2.4-5.6)", rotation angle = 0
  Source counts = 51.5 +/- 24.4
  Background counts = 545.4
  Rate = 0.002 +/- 0.0009
[Wed May 29 05:32:58 2013] Vigneting correction estimate = 1.000000
[Wed May 29 05:32:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 05:32:58 2013] Assessing source extent using major axis lower bound
[Wed May 29 05:32:58 2013] Source does appear to be extended
[Wed May 29 05:32:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 05:33:15 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 29 05:33:15 2013] Initial guess for spatial extent in simple fitting = 3.38"
[Wed May 29 05:33:15 2013] source mask rpix=0.8, npix_max = 6, mask sum = 5, frac = 0.765
[Wed May 29 05:33:15 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 3.38"
[Wed May 29 05:33:16 2013] fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_src15.ximg exists
[Wed May 29 05:33:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_src15.csv
[Wed May 29 05:33:16 2013] fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_src15_1.ximg exists
[Wed May 29 05:33:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_src15.csv
[Wed May 29 05:33:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 05:33:17 2013] fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Wed May 29 05:33:17 2013] fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Wed May 29 05:33:17 2013] Fit fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Wed May 29 05:33:28 2013] Spatial fit model total counts = 418.266000, observed total counts = 388.000000
[Wed May 29 05:33:28 2013] Offset between fit and detection position for source 16 = 0.227514 pixels
[Wed May 29 05:33:28 2013] 425.334200 total counts/ 335.282000 bgd. counts: snr = 4.918008
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.227514 pixels
  Position = (244.7, 354.2) = 4 53 51.09 -42 11 7.0
  Extent = 4.6 (3.7-6.0)", rotation angle = 0
  Source counts = 90.1 +/- 20.6
  Background counts = 335.3
  Rate = 0.003 +/- 0.0008
[Wed May 29 05:33:28 2013] Vigneting correction estimate = 1.000000
[Wed May 29 05:33:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 05:33:28 2013] Assessing source extent using major axis lower bound
[Wed May 29 05:33:28 2013] Source does appear to be extended
[Wed May 29 05:33:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 05:33:45 2013] XMMSAS src. selection expression = ellipse(21244.502000, 30768.077600, 273.164408, 273.164408, 0.000000, X, Y)
[Wed May 29 05:33:45 2013] Not overwriting source region fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src16_src.reg
[Wed May 29 05:33:45 2013] Extracting stamp from image fullrun_pn_xmm0554740801_pi300-10000_cl_sm2.00.img.gz, (229, 339) - (260, 370)
[Wed May 29 05:33:45 2013] XMMSAS bgd. selection expression = annulus(21244.502000, 30768.077600, 455.274013, 910.548026, X, Y) && !ellipse(22009.173200, 31442.881000, 398.508811, 398.508811, 0.000000, X, Y)
[Wed May 29 05:33:45 2013] Writing fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src16.gif
[Wed May 29 05:33:47 2013] ../../xmm0554740801/products/events/fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src16_src.evt and ../../xmm0554740801/products/events/fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src16_bgd.evt exist, delete to re-create
[Wed May 29 05:33:47 2013] Mean detx,y = (-5381.20, -3676.30) 
[Wed May 29 05:33:47 2013] ../../xmm0554740801/products/images/fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src16_src.img and ../../xmm0554740801/products/images/fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src16_bgd.img exist, delete to re-create
[Wed May 29 05:33:47 2013] ../../xmm0554740801/products/spectra/fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src16_src_b10.pi.gz and ../../xmm0554740801/products/spectra/fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src16_bgd.pi exist, delete to re-create
[Wed May 29 05:33:47 2013] Setting source spectrum file to fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed May 29 05:33:47 2013] Setting bgd. spectrum file to fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Wed May 29 05:33:47 2013] ../../xmm0554740801/products/lightcurves/fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src16_src.lc and ../../xmm0554740801/products/lightcurves/fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src16_bgd.lc exist, delete to re-create
[Wed May 29 05:53:47 2013] Not generating rmf since there are only 90 counts
[Wed May 29 05:53:47 2013] rmf not generated due to insufficient counts
[Wed May 29 06:32:18 2013] Updating aperture counts using extracted products
[Wed May 29 06:32:18 2013] Total counts from fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 118.00
[Wed May 29 06:32:18 2013] Total counts from fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src16_bgd.pi.gz = 227.00
[Wed May 29 06:32:18 2013] Got source and background scale factors 207932.000000, 1530103.000000
[Wed May 29 06:32:18 2013] User source parameters:
  Position = (244.7, 354.2) = 4 53 51.09 -42 11 7.0
  Extent = 4.6 (3.7-6.0)", rotation angle = 0
  Source aperture counts = 87.2 +/- 11.9
  Background aperture counts = 30.8
  Rate = 0.003 +/- 0.0004

[Wed May 29 06:32:24 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 06:32:24 2013] Using photon index=1.80, rate=0.00337, arf fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src16.arf
[Wed May 29 06:32:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 06:32:24 2013] Updating source flux to 1.9e-14
[Wed May 29 06:32:37 2013] Source 16 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 29 06:32:41 2013] xmm0554740801/analysis//spectral/fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete