[Wed May 29 05:32:21 2013] Detection parameters:
  Position = (309.3, 368.1) = 4 53 25.82 -42 10 5.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 181.3 +/- 17.7
  Background counts = 41.3
  Rate = 0.008 +/- 0.0008

[Wed May 29 05:32:23 2013] Off-axis axis estimate = 5.11'
[Wed May 29 05:32:44 2013] Using EEF radius (= 8.98 ")to estimate initial spatial extent for simple fitting
[Wed May 29 05:32:44 2013] Initial guess for spatial extent in simple fitting = 8.98"
[Wed May 29 05:32:44 2013] source mask rpix=2.1, npix_max = 26, mask sum = 20, frac = 0.760
[Wed May 29 05:32:44 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 8.98"
[Wed May 29 05:32:46 2013] fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_src12.ximg exists
[Wed May 29 05:32:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_src12.csv
[Wed May 29 05:32:46 2013] fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_src12_1.ximg exists
[Wed May 29 05:32:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_src12.csv
[Wed May 29 05:32:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 05:32:47 2013] fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Wed May 29 05:32:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src12.csv
[Wed May 29 05:32:47 2013] fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Wed May 29 05:32:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src12.csv
[Wed May 29 05:32:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 05:32:58 2013] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 12.116505 pixels away
[Wed May 29 05:32:58 2013] Vigneting correction estimate = 1.000000
[Wed May 29 05:32:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 05:32:58 2013] Assessing source extent using major
[Wed May 29 05:32:58 2013] Source does appear to be extended
[Wed May 29 05:32:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 05:33:15 2013] Using EEF radius (= 8.98 ")to estimate initial spatial extent for simple fitting
[Wed May 29 05:33:15 2013] Initial guess for spatial extent in simple fitting = 8.98"
[Wed May 29 05:33:15 2013] source mask rpix=2.1, npix_max = 26, mask sum = 20, frac = 0.760
[Wed May 29 05:33:15 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 8.98"
[Wed May 29 05:33:16 2013] fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_src12.ximg exists
[Wed May 29 05:33:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_src12.csv
[Wed May 29 05:33:16 2013] fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_src12_1.ximg exists
[Wed May 29 05:33:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_src12.csv
[Wed May 29 05:33:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 05:33:17 2013] fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Wed May 29 05:33:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src12.csv
[Wed May 29 05:33:17 2013] fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Wed May 29 05:33:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src12.csv
[Wed May 29 05:33:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 05:33:28 2013] Source 13 is offset by 3.184456 and 7.323836 pixels which is larger than
2 X fitted extent = 1.032736 x 1.032736, not incorporating fit results
[Wed May 29 05:33:28 2013] Vigneting correction estimate = 1.000000
[Wed May 29 05:33:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 05:33:28 2013] Assessing source extent using major
[Wed May 29 05:33:28 2013] Source does appear to be extended
[Wed May 29 05:33:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 05:33:45 2013] XMMSAS src. selection expression = ellipse(26862.717651, 31976.837738, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 05:33:45 2013] Not overwriting source region fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src13_src.reg
[Wed May 29 05:33:45 2013] Extracting stamp from image fullrun_pn_xmm0554740801_pi300-10000_cl_sm2.00.img.gz, (272, 331) - (347, 406)
[Wed May 29 05:33:45 2013] XMMSAS bgd. selection expression = annulus(26862.717651, 31976.837738, 1087.500000, 2175.000000, X, Y) && !ellipse(29558.687500, 29778.632782, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 05:33:45 2013] Writing fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src13.gif
[Wed May 29 05:33:47 2013] ../../xmm0554740801/products/events/fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src13_src.evt and ../../xmm0554740801/products/events/fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src13_bgd.evt exist, delete to re-create
[Wed May 29 05:33:47 2013] Mean detx,y = (236.27, -4529.57) 
[Wed May 29 05:33:47 2013] ../../xmm0554740801/products/images/fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src13_src.img and ../../xmm0554740801/products/images/fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src13_bgd.img exist, delete to re-create
[Wed May 29 05:33:47 2013] ../../xmm0554740801/products/spectra/fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src13_src_b10.pi.gz and ../../xmm0554740801/products/spectra/fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src13_bgd.pi exist, delete to re-create
[Wed May 29 05:33:47 2013] Setting source spectrum file to fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed May 29 05:33:47 2013] Setting bgd. spectrum file to fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Wed May 29 05:33:47 2013] ../../xmm0554740801/products/lightcurves/fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src13_src.lc and ../../xmm0554740801/products/lightcurves/fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src13_bgd.lc exist, delete to re-create
[Wed May 29 05:50:51 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 05:50:51 2013] rmf not generated due to insufficient counts
[Wed May 29 06:32:17 2013] Updating aperture counts using extracted products
[Wed May 29 06:32:17 2013] Total counts from fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 306.00
[Wed May 29 06:32:18 2013] Total counts from fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src13_bgd.pi.gz = 1711.00
[Wed May 29 06:32:18 2013] Got source and background scale factors 1067703.000000, 10601423.000000
[Wed May 29 06:32:18 2013] User source parameters:
  Position = (309.3, 368.1) = 4 53 25.82 -42 10 5.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 133.7 +/- 18.5
  Background aperture counts = 172.3
  Rate = 0.005 +/- 0.0007

[Wed May 29 06:32:18 2013] Updating counts from extracted products
[Wed May 29 06:32:18 2013] Set source signif. to 133.68/13.13 = 10.18
[Wed May 29 06:32:24 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 06:32:24 2013] Using photon index=1.80, rate=0.005, arf fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src13.arf
[Wed May 29 06:32:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 06:32:24 2013] Updating source flux to 1.7e-14
[Wed May 29 06:32:37 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 06:32:41 2013] xmm0554740801/analysis//spectral/fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete