[Wed May 29 05:32:21 2013] Detection parameters: Position = (333.2, 419.4) = 4 53 16.48 -42 6 22.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 43.7 +/- 11.6 Background counts = 39.9 Rate = 0.001 +/- 0.0003 [Wed May 29 05:32:23 2013] Off-axis axis estimate = 9.12' [Wed May 29 05:32:44 2013] Using EEF radius (= 10.99 ")to estimate initial spatial extent for simple fitting [Wed May 29 05:32:44 2013] Initial guess for spatial extent in simple fitting = 10.99" [Wed May 29 05:32:44 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.983 [Wed May 29 05:32:44 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 10.99" [Wed May 29 05:32:46 2013] fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_src9.ximg exists [Wed May 29 05:32:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_src9.csv [Wed May 29 05:32:46 2013] fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_src9_1.ximg exists [Wed May 29 05:32:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_src9.csv [Wed May 29 05:32:46 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_src9_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 29 05:32:46 2013] fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src9.ximg exists [Wed May 29 05:32:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src9.csv [Wed May 29 05:32:47 2013] fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists [Wed May 29 05:32:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src9.csv [Wed May 29 05:32:47 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src9_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 29 05:32:58 2013] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 13.162761 pixels away [Wed May 29 05:32:58 2013] Vigneting correction estimate = 1.000000 [Wed May 29 05:32:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 29 05:32:58 2013] Assessing source extent using major [Wed May 29 05:32:58 2013] Source does appear to be extended [Wed May 29 05:32:58 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 29 05:32:58 2013] Source is confused with source 9 [Wed May 29 05:33:15 2013] Using EEF radius (= 10.99 ")to estimate initial spatial extent for simple fitting [Wed May 29 05:33:15 2013] Initial guess for spatial extent in simple fitting = 10.99" [Wed May 29 05:33:15 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.983 [Wed May 29 05:33:15 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 10.99" [Wed May 29 05:33:16 2013] fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_src9.ximg exists [Wed May 29 05:33:16 2013] fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_src9_1.ximg exists [Wed May 29 05:33:16 2013] Fit fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_src9 appears to have run properly [Wed May 29 05:33:17 2013] fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src9.ximg exists [Wed May 29 05:33:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src9.csv [Wed May 29 05:33:17 2013] fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists [Wed May 29 05:33:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src9.csv [Wed May 29 05:33:17 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src9_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 29 05:33:28 2013] Source 10 is offset by -4.480983 and 4.074489 pixels which is larger than 2 X fitted extent = 0.587076 x 0.587076, not incorporating fit results [Wed May 29 05:33:28 2013] Vigneting correction estimate = 1.000000 [Wed May 29 05:33:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 29 05:33:28 2013] Assessing source extent using major [Wed May 29 05:33:28 2013] Source does appear to be extended [Wed May 29 05:33:28 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 29 05:33:45 2013] XMMSAS src. selection expression = ellipse(28941.260437, 36437.374573, 652.500000, 652.500000, 0.000000, X, Y) [Wed May 29 05:33:45 2013] Not overwriting source region fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src10_src.reg [Wed May 29 05:33:45 2013] Extracting stamp from image fullrun_pn_xmm0554740801_pi300-10000_cl_sm2.00.img.gz, (296, 382) - (371, 457) [Wed May 29 05:33:45 2013] XMMSAS bgd. selection expression = annulus(28941.260437, 36437.374573, 1087.500000, 2175.000000, X, Y) && !ellipse(27237.448486, 39006.479156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28766.063019, 37016.489563, 870.000000, 870.000000, 0.000000, X, Y) [Wed May 29 05:33:45 2013] Writing fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src10.gif [Wed May 29 05:33:47 2013] ../../xmm0554740801/products/events/fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0554740801/products/events/fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create [Wed May 29 05:33:47 2013] Mean detx,y = (2571.95, -8957.12) [Wed May 29 05:33:47 2013] ../../xmm0554740801/products/images/fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src10_src.img and ../../xmm0554740801/products/images/fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create [Wed May 29 05:33:47 2013] ../../xmm0554740801/products/spectra/fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src10_src_b10.pi.gz and ../../xmm0554740801/products/spectra/fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create [Wed May 29 05:33:47 2013] Setting source spectrum file to fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src10_src_b10.pi.gz [Wed May 29 05:33:47 2013] Setting bgd. spectrum file to fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src10_bgd.pi.gz [Wed May 29 05:33:47 2013] ../../xmm0554740801/products/lightcurves/fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0554740801/products/lightcurves/fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create [Wed May 29 05:50:18 2013] Not generating rmf since there are only 43 counts [Wed May 29 05:50:18 2013] rmf not generated due to insufficient counts [Wed May 29 06:32:17 2013] Updating aperture counts using extracted products [Wed May 29 06:32:17 2013] Total counts from fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 279.00 [Wed May 29 06:32:17 2013] Total counts from fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src10_bgd.pi.gz = 1520.00 [Wed May 29 06:32:17 2013] Got source and background scale factors 1142134.000000, 9650237.000000 [Wed May 29 06:32:17 2013] User source parameters: Position = (333.2, 419.4) = 4 53 16.48 -42 6 22.6 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 99.1 +/- 17.7 Background aperture counts = 179.9 Rate = 0.004 +/- 0.0007 [Wed May 29 06:32:17 2013] Updating counts from extracted products [Wed May 29 06:32:17 2013] Set source signif. to 99.10/13.41 = 7.39 [Wed May 29 06:32:24 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 29 06:32:24 2013] Using photon index=1.80, rate=0.00371, arf fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src10.arf [Wed May 29 06:32:24 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 29 06:32:24 2013] Updating source flux to 1.6e-14 [Wed May 29 06:32:37 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 29 06:32:41 2013] xmm0554740801/analysis//spectral/fullrun_pn_xmm0554740801_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete