[Wed May 29 05:32:25 2013] Detection parameters: Position = (340.0, 343.1) = 4 53 13.82 -42 11 55.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 85.0 +/- 14.7 Background counts = 47.2 Rate = 0.003 +/- 0.0005 [Wed May 29 05:32:26 2013] Off-axis axis estimate = 4.42' [Wed May 29 05:32:48 2013] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting [Wed May 29 05:32:48 2013] Initial guess for spatial extent in simple fitting = 8.64" [Wed May 29 05:32:48 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.011 [Wed May 29 05:32:48 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 8.64" [Wed May 29 05:32:49 2013] fullrun_mos2_xmm0554740801_pi300-10000_cl_pass0_src13.ximg exists [Wed May 29 05:32:49 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0554740801_pi300-10000_cl_pass0_src13.csv [Wed May 29 05:32:49 2013] fullrun_mos2_xmm0554740801_pi300-10000_cl_pass0_src13_1.ximg exists [Wed May 29 05:32:49 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0554740801_pi300-10000_cl_pass0_src13.csv [Wed May 29 05:32:49 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0554740801_pi300-10000_cl_pass0_src13_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0554740801_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 29 05:32:49 2013] fullrun_mos2_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src13.ximg exists [Wed May 29 05:32:49 2013] fullrun_mos2_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists [Wed May 29 05:32:49 2013] Fit fullrun_mos2_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly [Wed May 29 05:33:05 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 11.446009 pixels away [Wed May 29 05:33:05 2013] Vigneting correction estimate = 1.000000 [Wed May 29 05:33:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 29 05:33:05 2013] Assessing source extent using major [Wed May 29 05:33:05 2013] Source does appear to be extended [Wed May 29 05:33:05 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 29 05:33:18 2013] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting [Wed May 29 05:33:18 2013] Initial guess for spatial extent in simple fitting = 8.64" [Wed May 29 05:33:18 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.011 [Wed May 29 05:33:18 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 8.64" [Wed May 29 05:33:19 2013] fullrun_mos2_xmm0554740801_pi300-10000_cl_pass1_src13.ximg exists [Wed May 29 05:33:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554740801_pi300-10000_cl_pass1_src13.csv [Wed May 29 05:33:19 2013] fullrun_mos2_xmm0554740801_pi300-10000_cl_pass1_src13_1.ximg exists [Wed May 29 05:33:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554740801_pi300-10000_cl_pass1_src13.csv [Wed May 29 05:33:19 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0554740801_pi300-10000_cl_pass1_src13_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0554740801_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 29 05:33:19 2013] fullrun_mos2_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src13.ximg exists [Wed May 29 05:33:19 2013] fullrun_mos2_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists [Wed May 29 05:33:19 2013] Fit fullrun_mos2_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly [Wed May 29 05:33:34 2013] Spatial fit model total counts = 211.000000, observed total counts = 211.000000 [Wed May 29 05:33:34 2013] Offset between fit and detection position for source 9 = 0.223894 pixels [Wed May 29 05:33:34 2013] 210.092800 total counts/ 163.376000 bgd. counts: snr = 3.654929 Spatial fit parameters: Offset between fit and detection position for source 9 = 0.223894 pixels Position = (339.8, 342.9) = 4 53 13.89 -42 11 56.0 Extent = 4.3 (3.1-5.6)", rotation angle = 0 Source counts = 46.7 +/- 14.5 Background counts = 163.4 Rate = 0.002 +/- 0.0005 [Wed May 29 05:33:34 2013] Vigneting correction estimate = 1.000000 [Wed May 29 05:33:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 29 05:33:34 2013] Assessing source extent using major axis lower bound [Wed May 29 05:33:34 2013] Source does appear to be extended [Wed May 29 05:33:34 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 29 06:19:13 2013] XMMSAS src. selection expression = ellipse(29513.551620, 29787.146400, 257.645407, 257.645407, 0.000000, X, Y) [Wed May 29 06:19:13 2013] Writing source region out to fullrun_mos2_xmm0554740801_pi300-10000_pass1_cl_src9_src.reg [Wed May 29 06:19:13 2013] Extracting stamp from image fullrun_mos2_xmm0554740801_pi300-10000_cl_sm2.00.img.gz, (325, 328) - (355, 358) [Wed May 29 06:19:13 2013] XMMSAS bgd. selection expression = annulus(29513.551620, 29787.146400, 429.409012, 858.818025, X, Y) [Wed May 29 06:19:13 2013] Writing fullrun_mos2_xmm0554740801_pi300-10000_pass1_cl_src9.gif [Wed May 29 06:22:22 2013] Mean detx,y = (-2625.87, 2024.59) [Wed May 29 06:22:23 2013] Setting backscal keywords in source and bgd. spectrum [Wed May 29 06:22:30 2013] Binned source spectrum to 10 counts/bin [Wed May 29 06:22:30 2013] Setting source spectrum file to fullrun_mos2_xmm0554740801_pi300-10000_pass1_cl_src9_src_b10.pi.gz [Wed May 29 06:22:30 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0554740801_pi300-10000_pass1_cl_src9_bgd.pi.gz [Wed May 29 06:29:52 2013] Not generating rmf since there are only 46 counts [Wed May 29 06:29:52 2013] rmf not generated due to insufficient counts [Wed May 29 06:32:30 2013] Updating aperture counts using extracted products [Wed May 29 06:32:30 2013] Total counts from fullrun_mos2_xmm0554740801_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 63.00 [Wed May 29 06:32:30 2013] Total counts from fullrun_mos2_xmm0554740801_pi300-10000_pass1_cl_src9_bgd.pi.gz = 131.00 [Wed May 29 06:32:30 2013] Got source and background scale factors 209600.000000, 1747200.000000 [Wed May 29 06:32:30 2013] User source parameters: Position = (339.8, 342.9) = 4 53 13.89 -42 11 56.0 Extent = 4.3 (3.1-5.6)", rotation angle = 0 Source aperture counts = 47.3 +/- 9.0 Background aperture counts = 15.7 Rate = 0.002 +/- 0.0003 [Wed May 29 06:32:31 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 29 06:32:31 2013] Using photon index=1.80, rate=0.00155, arf fullrun_mos2_xmm0554740801_pi300-10000_pass1_cl_src9.arf [Wed May 29 06:32:31 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 29 06:32:32 2013] Updating source flux to 2.3e-14 [Wed May 29 06:32:36 2013] Source 9 has fewer than 100.000000 counts, skipping spectral fitting [Wed May 29 06:32:37 2013] xmm0554740801/analysis//spectral/fullrun_mos2_xmm0554740801_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete