[Wed May 29 05:32:24 2013] Detection parameters:
  Position = (310.4, 319.1) = 4 53 25.38 -42 13 39.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 681.1 +/- 32.9
  Background counts = 52.6
  Rate = 0.02 +/- 0.001

[Wed May 29 05:32:26 2013] Off-axis axis estimate = 1.73'
[Wed May 29 05:32:48 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed May 29 05:32:48 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Wed May 29 05:32:48 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.055
[Wed May 29 05:32:48 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Wed May 29 05:32:48 2013] fullrun_mos2_xmm0554740801_pi300-10000_cl_pass0_src1.ximg exists
[Wed May 29 05:32:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554740801_pi300-10000_cl_pass0_src1.csv
[Wed May 29 05:32:49 2013] fullrun_mos2_xmm0554740801_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May 29 05:32:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554740801_pi300-10000_cl_pass0_src1.csv
[Wed May 29 05:32:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554740801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554740801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 05:32:49 2013] fullrun_mos2_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May 29 05:32:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed May 29 05:32:49 2013] fullrun_mos2_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May 29 05:32:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed May 29 05:32:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 05:33:05 2013] Source 1 is offset by -6.285056 and -7.597007 pixels which is larger than
2 X fitted extent = 0.838487 x 0.838487, not incorporating fit results
[Wed May 29 05:33:05 2013] Vigneting correction estimate = 1.000000
[Wed May 29 05:33:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 05:33:05 2013] Assessing source extent using major
[Wed May 29 05:33:05 2013] Source does appear to be extended
[Wed May 29 05:33:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 05:33:18 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed May 29 05:33:18 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Wed May 29 05:33:18 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.055
[Wed May 29 05:33:18 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.29"
[Wed May 29 05:33:19 2013] fullrun_mos2_xmm0554740801_pi300-10000_cl_pass1_src1.ximg exists
[Wed May 29 05:33:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554740801_pi300-10000_cl_pass1_src1.csv
[Wed May 29 05:33:19 2013] fullrun_mos2_xmm0554740801_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed May 29 05:33:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554740801_pi300-10000_cl_pass1_src1.csv
[Wed May 29 05:33:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554740801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554740801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 05:33:19 2013] fullrun_mos2_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed May 29 05:33:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed May 29 05:33:19 2013] fullrun_mos2_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May 29 05:33:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed May 29 05:33:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 05:33:34 2013] Source 1 is offset by -6.285056 and -7.597007 pixels which is larger than
2 X fitted extent = 0.838487 x 0.838487, not incorporating fit results
[Wed May 29 05:33:34 2013] Vigneting correction estimate = 1.000000
[Wed May 29 05:33:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 05:33:34 2013] Assessing source extent using major
[Wed May 29 05:33:34 2013] Source does appear to be extended
[Wed May 29 05:33:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 06:19:13 2013] XMMSAS src. selection expression = ellipse(26958.288086, 27714.148376, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 06:19:13 2013] Writing source region out to fullrun_mos2_xmm0554740801_pi300-10000_pass1_cl_src1_src.reg
[Wed May 29 06:19:13 2013] Extracting stamp from image fullrun_mos2_xmm0554740801_pi300-10000_cl_sm2.00.img.gz, (273, 282) - (348, 357)
[Wed May 29 06:19:13 2013] XMMSAS bgd. selection expression = annulus(26958.288086, 27714.148376, 1087.500000, 2175.000000, X, Y) && !ellipse(25228.427600, 25475.173600, 380.556011, 380.556011, 0.000000, X, Y) && !ellipse(24686.762800, 25927.248400, 283.854408, 283.854408, 0.000000, X, Y)
[Wed May 29 06:19:13 2013] Writing fullrun_mos2_xmm0554740801_pi300-10000_pass1_cl_src1.gif
[Wed May 29 06:19:15 2013] Mean detx,y = (56.24, 108.73) 
[Wed May 29 06:19:16 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 06:19:25 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 06:19:26 2013] Setting source spectrum file to fullrun_mos2_xmm0554740801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 29 06:19:26 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0554740801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed May 29 06:25:04 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 06:25:04 2013] rmf not generated due to insufficient counts
[Wed May 29 06:32:28 2013] Updating aperture counts using extracted products
[Wed May 29 06:32:28 2013] Total counts from fullrun_mos2_xmm0554740801_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 637.00
[Wed May 29 06:32:28 2013] Total counts from fullrun_mos2_xmm0554740801_pi300-10000_pass1_cl_src1_bgd.pi.gz = 832.00
[Wed May 29 06:32:28 2013] Got source and background scale factors 1273268.000000, 10690224.000000
[Wed May 29 06:32:28 2013] User source parameters:
  Position = (310.4, 319.1) = 4 53 25.38 -42 13 39.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 537.9 +/- 26.3
  Background aperture counts = 99.1
  Rate = 0.02 +/- 0.0009

[Wed May 29 06:32:28 2013] Updating counts from extracted products
[Wed May 29 06:32:28 2013] Set source signif. to 537.90/9.95 = 54.04
[Wed May 29 06:32:31 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 06:32:31 2013] Using photon index=1.80, rate=0.0179, arf fullrun_mos2_xmm0554740801_pi300-10000_pass1_cl_src1.arf
[Wed May 29 06:32:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 06:32:31 2013] Updating source flux to 1.9e-13
[Wed May 29 06:32:36 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 06:32:37 2013] xmm0554740801/analysis//spectral/fullrun_mos2_xmm0554740801_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete