[Wed May 29 05:32:24 2013] Detection parameters:
  Position = (339.8, 343.5) = 4 53 13.87 -42 11 53.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 48.6 +/- 12.1
  Background counts = 42.4
  Rate = 0.002 +/- 0.0004

[Wed May 29 05:32:24 2013] Off-axis axis estimate = 4.44'
[Wed May 29 05:32:47 2013] Using EEF radius (= 8.65 ")to estimate initial spatial extent for simple fitting
[Wed May 29 05:32:47 2013] Initial guess for spatial extent in simple fitting = 8.65"
[Wed May 29 05:32:47 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.010
[Wed May 29 05:32:47 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 8.65"
[Wed May 29 05:32:48 2013] fullrun_mos1_xmm0554740801_pi300-10000_cl_pass0_src17.ximg exists
[Wed May 29 05:32:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554740801_pi300-10000_cl_pass0_src17.csv
[Wed May 29 05:32:48 2013] fullrun_mos1_xmm0554740801_pi300-10000_cl_pass0_src17_1.ximg exists
[Wed May 29 05:32:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554740801_pi300-10000_cl_pass0_src17.csv
[Wed May 29 05:32:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554740801_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554740801_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 05:32:48 2013] fullrun_mos1_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Wed May 29 05:32:48 2013] fullrun_mos1_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Wed May 29 05:32:48 2013] Fit fullrun_mos1_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Wed May 29 05:33:02 2013] Spatial fit model total counts = 211.188000, observed total counts = 214.000000
[Wed May 29 05:33:02 2013] Offset between fit and detection position for source 15 = 0.700423 pixels
[Wed May 29 05:33:02 2013] 215.689100 total counts/ 171.807000 bgd. counts: snr = 3.347858
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.700423 pixels
  Position = (339.4, 342.9) = 4 53 14.03 -42 11 56.2
  Extent = 6.8 (4.4-9.3)", rotation angle = 0
  Source counts = 43.9 +/- 14.7
  Background counts = 171.8
  Rate = 0.001 +/- 0.0005
[Wed May 29 05:33:02 2013] Vigneting correction estimate = 1.000000
[Wed May 29 05:33:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 05:33:02 2013] Assessing source extent using major axis lower bound
[Wed May 29 05:33:02 2013] Source does appear to be extended
[Wed May 29 05:33:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 05:33:17 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 29 05:33:17 2013] Initial guess for spatial extent in simple fitting = 6.83"
[Wed May 29 05:33:17 2013] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.166
[Wed May 29 05:33:17 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 6.83"
[Wed May 29 05:33:18 2013] fullrun_mos1_xmm0554740801_pi300-10000_cl_pass1_src17.ximg exists
[Wed May 29 05:33:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554740801_pi300-10000_cl_pass1_src17.csv
[Wed May 29 05:33:18 2013] fullrun_mos1_xmm0554740801_pi300-10000_cl_pass1_src17_1.ximg exists
[Wed May 29 05:33:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554740801_pi300-10000_cl_pass1_src17.csv
[Wed May 29 05:33:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554740801_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554740801_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 05:33:18 2013] fullrun_mos1_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Wed May 29 05:33:18 2013] fullrun_mos1_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Wed May 29 05:33:18 2013] Fit fullrun_mos1_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Wed May 29 05:33:31 2013] Spatial fit model total counts = 211.190000, observed total counts = 214.000000
[Wed May 29 05:33:31 2013] Offset between fit and detection position for source 15 = 0.008771 pixels
[Wed May 29 05:33:31 2013] 215.689200 total counts/ 172.229000 bgd. counts: snr = 3.311605
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.008771 pixels
  Position = (339.4, 342.9) = 4 53 14.03 -42 11 56.1
  Extent = 6.7 (4.4-9.2)", rotation angle = 0
  Source counts = 43.5 +/- 14.7
  Background counts = 172.2
  Rate = 0.001 +/- 0.0005
[Wed May 29 05:33:31 2013] Vigneting correction estimate = 1.000000
[Wed May 29 05:33:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 05:33:31 2013] Assessing source extent using major axis lower bound
[Wed May 29 05:33:31 2013] Source does appear to be extended
[Wed May 29 05:33:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 06:06:12 2013] XMMSAS src. selection expression = ellipse(29483.136400, 29785.378400, 404.699412, 404.699412, 0.000000, X, Y)
[Wed May 29 06:06:12 2013] Not overwriting source region fullrun_mos1_xmm0554740801_pi300-10000_pass1_cl_src15_src.reg
[Wed May 29 06:06:12 2013] Extracting stamp from image fullrun_mos1_xmm0554740801_pi300-10000_cl_sm2.00.img.gz, (316, 320) - (363, 366)
[Wed May 29 06:06:12 2013] XMMSAS bgd. selection expression = annulus(29483.136400, 29785.378400, 674.499019, 1348.998039, X, Y)
[Wed May 29 06:06:12 2013] Writing fullrun_mos1_xmm0554740801_pi300-10000_pass1_cl_src15.gif
[Wed May 29 06:09:35 2013] Mean detx,y = (2237.36, 2421.20) 
[Wed May 29 06:09:36 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 06:09:43 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 06:09:43 2013] Setting source spectrum file to fullrun_mos1_xmm0554740801_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed May 29 06:09:43 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0554740801_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Wed May 29 06:18:59 2013] Not generating rmf since there are only 43 counts
[Wed May 29 06:18:59 2013] rmf not generated due to insufficient counts
[Wed May 29 06:32:27 2013] Updating aperture counts using extracted products
[Wed May 29 06:32:27 2013] Total counts from fullrun_mos1_xmm0554740801_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 85.00
[Wed May 29 06:32:27 2013] Total counts from fullrun_mos1_xmm0554740801_pi300-10000_pass1_cl_src15_bgd.pi.gz = 363.00
[Wed May 29 06:32:27 2013] Got source and background scale factors 496768.000000, 4135096.000000
[Wed May 29 06:32:27 2013] User source parameters:
  Position = (339.4, 342.9) = 4 53 14.03 -42 11 56.1
  Extent = 6.7 (4.4-9.2)", rotation angle = 0
  Source aperture counts = 41.4 +/- 10.3
  Background aperture counts = 43.6
  Rate = 0.001 +/- 0.0003

[Wed May 29 06:32:28 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 06:32:28 2013] Using photon index=1.80, rate=0.00143, arf fullrun_mos1_xmm0554740801_pi300-10000_pass1_cl_src15.arf
[Wed May 29 06:32:28 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 06:32:28 2013] Updating source flux to 1.6e-14
[Wed May 29 06:32:34 2013] Source 15 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 29 06:32:36 2013] xmm0554740801/analysis//spectral/fullrun_mos1_xmm0554740801_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete