[Wed May 29 05:32:24 2013] Detection parameters:
  Position = (488.4, 232.2) = 4 52 15.58 -42 19 59.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.9 +/- 10.4
  Background counts = 25.0
  Rate = 0.002 +/- 0.0003

[Wed May 29 05:32:24 2013] Off-axis axis estimate = 14.58'
[Wed May 29 05:32:47 2013] Using EEF radius (= 13.72 ")to estimate initial spatial extent for simple fitting
[Wed May 29 05:32:47 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 29 05:32:47 2013] Initial guess for spatial extent in simple fitting = 13.72"
[Wed May 29 05:32:47 2013] source mask rpix=3.2, npix_max = 53, mask sum = 30, frac = 0.562
[Wed May 29 05:32:47 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 13.72"
[Wed May 29 05:32:48 2013] fullrun_mos1_xmm0554740801_pi300-10000_cl_pass0_src16.ximg exists
[Wed May 29 05:32:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554740801_pi300-10000_cl_pass0_src16.csv
[Wed May 29 05:32:48 2013] fullrun_mos1_xmm0554740801_pi300-10000_cl_pass0_src16_1.ximg exists
[Wed May 29 05:32:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554740801_pi300-10000_cl_pass0_src16.csv
[Wed May 29 05:32:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554740801_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554740801_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 05:32:48 2013] fullrun_mos1_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Wed May 29 05:32:48 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src16.csv
[Wed May 29 05:32:48 2013] fullrun_mos1_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Wed May 29 05:32:48 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src16.csv
[Wed May 29 05:32:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554740801_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 05:33:02 2013] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 18.633559 pixels away
[Wed May 29 05:33:02 2013] Vigneting correction estimate = 1.000000
[Wed May 29 05:33:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 05:33:02 2013] Assessing source extent using major
[Wed May 29 05:33:02 2013] Source does appear to be extended
[Wed May 29 05:33:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 05:33:17 2013] Using EEF radius (= 13.72 ")to estimate initial spatial extent for simple fitting
[Wed May 29 05:33:17 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 29 05:33:17 2013] Initial guess for spatial extent in simple fitting = 13.72"
[Wed May 29 05:33:17 2013] source mask rpix=3.2, npix_max = 53, mask sum = 30, frac = 0.562
[Wed May 29 05:33:17 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 13.72"
[Wed May 29 05:33:18 2013] fullrun_mos1_xmm0554740801_pi300-10000_cl_pass1_src16.ximg exists
[Wed May 29 05:33:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554740801_pi300-10000_cl_pass1_src16.csv
[Wed May 29 05:33:18 2013] fullrun_mos1_xmm0554740801_pi300-10000_cl_pass1_src16_1.ximg exists
[Wed May 29 05:33:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554740801_pi300-10000_cl_pass1_src16.csv
[Wed May 29 05:33:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554740801_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554740801_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 05:33:18 2013] fullrun_mos1_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Wed May 29 05:33:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src16.csv
[Wed May 29 05:33:18 2013] fullrun_mos1_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Wed May 29 05:33:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src16.csv
[Wed May 29 05:33:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554740801_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 05:33:31 2013] Spatial fit model total counts = 101.074000, observed total counts = 129.000000
[Wed May 29 05:33:31 2013] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 05:33:31 2013] Vigneting correction estimate = 1.000000
[Wed May 29 05:33:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 05:33:31 2013] Assessing source extent using major
[Wed May 29 05:33:31 2013] Source does appear to be extended
[Wed May 29 05:33:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 06:06:12 2013] XMMSAS src. selection expression = ellipse(42438.189484, 20156.241089, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 06:06:12 2013] Not overwriting source region fullrun_mos1_xmm0554740801_pi300-10000_pass1_cl_src11_src.reg
[Wed May 29 06:06:12 2013] Extracting stamp from image fullrun_mos1_xmm0554740801_pi300-10000_cl_sm2.00.img.gz, (451, 195) - (526, 270)
[Wed May 29 06:06:12 2013] XMMSAS bgd. selection expression = annulus(42438.189484, 20156.241089, 1087.500000, 2175.000000, X, Y)
[Wed May 29 06:06:12 2013] Writing fullrun_mos1_xmm0554740801_pi300-10000_pass1_cl_src11.gif
[Wed May 29 06:09:11 2013] Mean detx,y = (-8142.70, 14600.63) 
[Wed May 29 06:09:12 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 06:09:33 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 06:09:34 2013] Setting source spectrum file to fullrun_mos1_xmm0554740801_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed May 29 06:09:34 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0554740801_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Wed May 29 06:18:44 2013] Not generating rmf since there are only 56 counts
[Wed May 29 06:18:44 2013] rmf not generated due to insufficient counts
[Wed May 29 06:32:27 2013] Updating aperture counts using extracted products
[Wed May 29 06:32:27 2013] Total counts from fullrun_mos1_xmm0554740801_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 73.00
[Wed May 29 06:32:27 2013] Total counts from fullrun_mos1_xmm0554740801_pi300-10000_pass1_cl_src11_bgd.pi.gz = 332.00
[Wed May 29 06:32:27 2013] Got source and background scale factors 579968.000000, 4210513.000000
[Wed May 29 06:32:27 2013] User source parameters:
  Position = (488.4, 232.2) = 4 52 15.58 -42 19 59.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 27.3 +/- 9.6
  Background aperture counts = 45.7
  Rate = 0.0009 +/- 0.0003

[Wed May 29 06:32:27 2013] Updating counts from extracted products
[Wed May 29 06:32:27 2013] Set source signif. to 27.27/6.76 = 4.03
[Wed May 29 06:32:28 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 06:32:28 2013] Using photon index=1.80, rate=0.000899, arf fullrun_mos1_xmm0554740801_pi300-10000_pass1_cl_src11.arf
[Wed May 29 06:32:28 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 06:32:28 2013] Updating source flux to 9.9e-14
[Wed May 29 06:32:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 06:32:36 2013] xmm0554740801/analysis//spectral/fullrun_mos1_xmm0554740801_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete