[Thu Dec 22 10:51:19 2011] Detection parameters:
  Position = (337.4, 452.9) = 17 39 2.46 -30 10 57.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.9 +/- 13.3
  Background counts = 23.1
  Rate = 0.002 +/- 0.0003

[Thu Dec 22 10:51:19 2011] Off-axis axis estimate = 11.55'
[Thu Dec 22 11:38:50 2011] Using EEF radius (= 12.20 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 11:38:50 2011] Initial guess for spatial extent in simple fitting = 12.20"
[Thu Dec 22 11:38:50 2011] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.961
[Thu Dec 22 11:38:50 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 12.20"
[Thu Dec 22 11:55:34 2011] fullrun_mos1_xmm0554720101_pi300-10000_cl_pass0_src6.ximg exists
[Thu Dec 22 11:55:34 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554720101_pi300-10000_cl_pass0_src6.csv
[Thu Dec 22 11:55:34 2011] fullrun_mos1_xmm0554720101_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Dec 22 11:55:34 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554720101_pi300-10000_cl_pass0_src6.csv
[Thu Dec 22 11:55:34 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554720101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554720101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 11:55:34 2011] fullrun_mos1_xmm0554720101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Dec 22 11:55:34 2011] fullrun_mos1_xmm0554720101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Dec 22 11:55:34 2011] Fit fullrun_mos1_xmm0554720101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Thu Dec 22 12:39:55 2011] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 16.916435 pixels away
[Thu Dec 22 12:39:55 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 12:39:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 12:39:55 2011] Assessing source extent using major
[Thu Dec 22 12:39:55 2011] Source does appear to be extended
[Thu Dec 22 12:39:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 13:30:14 2011] Using EEF radius (= 12.20 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 13:30:14 2011] Initial guess for spatial extent in simple fitting = 12.20"
[Thu Dec 22 13:30:14 2011] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.961
[Thu Dec 22 13:30:14 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 12.20"
[Thu Dec 22 13:46:58 2011] fullrun_mos1_xmm0554720101_pi300-10000_cl_pass1_src5.ximg exists
[Thu Dec 22 13:46:58 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554720101_pi300-10000_cl_pass1_src5.csv
[Thu Dec 22 13:46:58 2011] fullrun_mos1_xmm0554720101_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Dec 22 13:46:58 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554720101_pi300-10000_cl_pass1_src5.csv
[Thu Dec 22 13:46:58 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554720101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554720101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 13:46:58 2011] fullrun_mos1_xmm0554720101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Dec 22 13:46:58 2011] fullrun_mos1_xmm0554720101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Dec 22 13:46:58 2011] Fit fullrun_mos1_xmm0554720101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Dec 22 14:23:35 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 11.563393 pixels away
[Thu Dec 22 14:23:35 2011] Vigneting correction estimate = 1.000000
[Thu Dec 22 14:23:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 22 14:23:35 2011] Assessing source extent using major
[Thu Dec 22 14:23:35 2011] Source does appear to be extended
[Thu Dec 22 14:23:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 22 15:47:14 2011] XMMSAS src. selection expression = ellipse(29303.762207, 39354.086212, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Dec 22 15:47:14 2011] Writing source region out to fullrun_mos1_xmm0554720101_pi300-10000_pass1_cl_src7_src.reg
[Thu Dec 22 15:47:14 2011] Extracting stamp from image fullrun_mos1_xmm0554720101_pi300-10000_cl_sm2.00.img.gz, (300, 415) - (375, 490)
[Thu Dec 22 15:47:14 2011] XMMSAS bgd. selection expression = annulus(29303.762207, 39354.086212, 1087.500000, 2175.000000, X, Y)
[Thu Dec 22 15:47:14 2011] Writing fullrun_mos1_xmm0554720101_pi300-10000_pass1_cl_src7.gif
[Thu Dec 22 15:50:04 2011] Mean detx,y = (11770.27, 2870.06) 
[Thu Dec 22 15:50:07 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 22 15:50:23 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 22 15:50:23 2011] Setting source spectrum file to fullrun_mos1_xmm0554720101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Dec 22 15:50:23 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0554720101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu Dec 22 16:00:07 2011] Not generating rmf since there are only 88 counts
[Thu Dec 22 16:00:07 2011] rmf not generated due to insufficient counts
[Thu Dec 22 16:09:51 2011] Updating aperture counts using extracted products
[Thu Dec 22 16:09:51 2011] Error reading totcts from fullrun_mos1_xmm0554720101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Dec 22 16:09:52 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 22 16:09:52 2011] Using photon index=1.80, rate=0.00208, arf fullrun_mos1_xmm0554720101_pi300-10000_pass1_cl_src7.arf
[Thu Dec 22 16:09:52 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 22 16:09:52 2011] Updating source flux to 3.9e-14
[Thu Dec 22 16:09:55 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting