[Mon Jun 18 10:54:59 2012] Detection parameters:
  Position = (278.1, 221.7) = 7 8 59.86 -49 37 54.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1280.3 +/- 46.4
  Background counts = 225.2
  Rate = 0.02 +/- 0.0007

[Mon Jun 18 10:55:00 2012] Off-axis axis estimate = 5.76'
[Mon Jun 18 11:02:05 2012] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 11:02:05 2012] Initial guess for spatial extent in simple fitting = 9.31"
[Mon Jun 18 11:02:05 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.076
[Mon Jun 18 11:02:05 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 9.31"
[Mon Jun 18 12:31:40 2012] fullrun_pn_xmm0554710801_pi300-10000_cl_pass0_src6.ximg exists
[Mon Jun 18 12:31:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554710801_pi300-10000_cl_pass0_src6.csv
[Mon Jun 18 12:31:40 2012] fullrun_pn_xmm0554710801_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon Jun 18 12:31:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554710801_pi300-10000_cl_pass0_src6.csv
[Mon Jun 18 12:31:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554710801_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554710801_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 12:31:41 2012] fullrun_pn_xmm0554710801_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon Jun 18 12:31:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554710801_pi300-10000_cl_pass0_tfrozen_src6.csv
[Mon Jun 18 12:31:41 2012] fullrun_pn_xmm0554710801_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Jun 18 12:31:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554710801_pi300-10000_cl_pass0_tfrozen_src6.csv
[Mon Jun 18 12:31:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554710801_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554710801_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 13:34:25 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 11.119962 pixels away
[Mon Jun 18 13:34:25 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 13:34:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 13:34:25 2012] Assessing source extent using major
[Mon Jun 18 13:34:25 2012] Source does appear to be extended
[Mon Jun 18 13:34:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 13:34:44 2012] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 13:34:44 2012] Initial guess for spatial extent in simple fitting = 9.31"
[Mon Jun 18 13:34:44 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.076
[Mon Jun 18 13:34:44 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 9.31"
[Mon Jun 18 15:00:06 2012] fullrun_pn_xmm0554710801_pi300-10000_cl_pass1_src6.ximg exists
[Mon Jun 18 15:00:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554710801_pi300-10000_cl_pass1_src6.csv
[Mon Jun 18 15:00:06 2012] fullrun_pn_xmm0554710801_pi300-10000_cl_pass1_src6_1.ximg exists
[Mon Jun 18 15:00:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554710801_pi300-10000_cl_pass1_src6.csv
[Mon Jun 18 15:00:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554710801_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554710801_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 15:00:06 2012] fullrun_pn_xmm0554710801_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Mon Jun 18 15:00:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554710801_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon Jun 18 15:00:06 2012] fullrun_pn_xmm0554710801_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Mon Jun 18 15:00:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554710801_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon Jun 18 15:00:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554710801_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554710801_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 15:58:17 2012] Spatial fit model total counts = 2320.650000, observed total counts = 2028.000000
[Mon Jun 18 15:58:17 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 18 15:58:17 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 15:58:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 15:58:17 2012] Assessing source extent using major
[Mon Jun 18 15:58:17 2012] Source does appear to be extended
[Mon Jun 18 15:58:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 15:58:36 2012] Counts = 1280.266235, rescaling region sizes by 2.000000
[Mon Jun 18 15:58:36 2012] XMMSAS src. selection expression = ellipse(24146.354523, 19236.055725, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jun 18 15:58:36 2012] Writing source region out to fullrun_pn_xmm0554710801_pi300-10000_pass1_cl_src6_src.reg
[Mon Jun 18 15:58:36 2012] Extracting stamp from image fullrun_pn_xmm0554710801_pi300-10000_cl_sm2.00.img.gz, (203, 147) - (353, 297)
[Mon Jun 18 15:58:36 2012] XMMSAS bgd. selection expression = annulus(24146.354523, 19236.055725, 4350.000000, 8700.000000, X, Y) && !ellipse(31837.613000, 13299.650200, 461.525613, 461.525613, 0.000000, X, Y) && !ellipse(27713.706180, 25021.311800, 1359.127239, 1359.127239, 0.000000, X, Y) && !ellipse(22662.536880, 24479.947200, 439.339213, 439.339213, 0.000000, X, Y) && !ellipse(28357.469940, 12938.255875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30844.572440, 19284.620600, 462.634413, 462.634413, 0.000000, X, Y) && !ellipse(21766.586716, 28455.854706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31054.015930, 27161.087189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21397.886780, 19672.776184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27418.011719, 16913.535660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22945.014832, 13518.958572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26979.161926, 11451.606735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33584.970398, 23035.487610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21998.919037, 27627.419189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30898.662800, 25856.202000, 330.895210, 330.895210, 0.000000, X, Y) && !ellipse(30780.434600, 26421.492400, 361.260810, 338.112810, 23.936000, X, Y) && !ellipse(26430.279755, 25627.542267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22669.824820, 22600.092200, 422.228012, 422.228012, 0.000000, X, Y) && !ellipse(24884.489838, 22187.076981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23644.116800, 17838.989800, 352.568810, 352.568810, 0.000000, X, Y) && !ellipse(28864.116800, 15576.989800, 352.568810, 352.568810, 0.000000, X, Y) && !ellipse(29484.697144, 14302.598434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26391.630493, 12681.922089, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 18 15:58:36 2012] Writing fullrun_pn_xmm0554710801_pi300-10000_pass1_cl_src6.gif
[Mon Jun 18 16:12:31 2012] Mean detx,y = (5362.39, 4081.61) 
[Mon Jun 18 16:12:43 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 18 16:14:57 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 18 16:14:58 2012] Setting source spectrum file to fullrun_pn_xmm0554710801_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Jun 18 16:14:58 2012] Setting bgd. spectrum file to fullrun_pn_xmm0554710801_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Mon Jun 18 17:24:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 18 17:24:01 2012] rmf not generated due to insufficient counts
[Mon Jun 18 18:44:47 2012] Updating aperture counts using extracted products
[Mon Jun 18 18:44:47 2012] Error reading totcts from fullrun_pn_xmm0554710801_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Jun 18 18:44:48 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 18 18:44:48 2012] Using photon index=1.80, rate=0.0191, arf fullrun_pn_xmm0554710801_pi300-10000_pass1_cl_src6.arf
[Mon Jun 18 18:44:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 18 18:44:48 2012] Updating source flux to 5.8e-14
[Mon Jun 18 18:46:32 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting