[Mon Jun 18 10:54:59 2012] Detection parameters:
  Position = (366.5, 153.2) = 7 8 20.22 -49 42 52.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3751.7 +/- 76.6
  Background counts = 201.9
  Rate = 0.04 +/- 0.0008

[Mon Jun 18 10:55:00 2012] Off-axis axis estimate = 11.63'
[Mon Jun 18 11:02:05 2012] Using EEF radius (= 12.24 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 11:02:05 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 18 11:02:05 2012] Initial guess for spatial extent in simple fitting = 12.24"
[Mon Jun 18 11:02:05 2012] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.115
[Mon Jun 18 11:02:05 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.24"
[Mon Jun 18 12:31:40 2012] fullrun_pn_xmm0554710801_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jun 18 12:31:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554710801_pi300-10000_cl_pass0_src1.csv
[Mon Jun 18 12:31:40 2012] fullrun_pn_xmm0554710801_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jun 18 12:31:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554710801_pi300-10000_cl_pass0_src1.csv
[Mon Jun 18 12:31:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554710801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554710801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 12:31:41 2012] fullrun_pn_xmm0554710801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jun 18 12:31:41 2012] fullrun_pn_xmm0554710801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jun 18 12:31:41 2012] Fit fullrun_pn_xmm0554710801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jun 18 13:34:25 2012] Spatial fit model total counts = 5780.990000, observed total counts = 5781.000000
[Mon Jun 18 13:34:25 2012] Offset between fit and detection position for source 1 = 0.198455 pixels
[Mon Jun 18 13:34:25 2012] 5793.380000 total counts/ 3342.140000 bgd. counts: snr = 42.400748
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.198455 pixels
  Position = (366.5, 153.4) = 7 8 20.22 -49 42 52.4
  Extent = 6.1 (5.9-6.4)", rotation angle = 0
  Source counts = 2451.2 +/- 76.1
  Background counts = 3342.1
  Rate = 0.03 +/- 0.001
[Mon Jun 18 13:34:25 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 13:34:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 13:34:25 2012] Assessing source extent using major axis lower bound
[Mon Jun 18 13:34:25 2012] Source does appear to be extended
[Mon Jun 18 13:34:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 13:34:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 18 13:34:44 2012] Initial guess for spatial extent in simple fitting = 6.15"
[Mon Jun 18 13:34:44 2012] source mask rpix=1.4, npix_max = 14, mask sum = 9, frac = 0.614
[Mon Jun 18 13:34:44 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.15"
[Mon Jun 18 15:00:05 2012] fullrun_pn_xmm0554710801_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jun 18 15:00:05 2012] fullrun_pn_xmm0554710801_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jun 18 15:00:05 2012] Fit fullrun_pn_xmm0554710801_pi300-10000_cl_pass1_src1 appears to have run properly
[Mon Jun 18 15:00:06 2012] fullrun_pn_xmm0554710801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jun 18 15:00:06 2012] fullrun_pn_xmm0554710801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jun 18 15:00:06 2012] Fit fullrun_pn_xmm0554710801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jun 18 15:58:17 2012] Spatial fit model total counts = 4284.010000, observed total counts = 4284.000000
[Mon Jun 18 15:58:17 2012] Offset between fit and detection position for source 1 = 0.022223 pixels
[Mon Jun 18 15:58:17 2012] 4309.010000 total counts/ 1991.620000 bgd. counts: snr = 51.927318
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.022223 pixels
  Position = (366.5, 153.4) = 7 8 20.23 -49 42 52.4
  Extent = 5.8 (5.5-6.0)", rotation angle = 0
  Source counts = 2317.4 +/- 65.6
  Background counts = 1991.6
  Rate = 0.03 +/- 0.0009
[Mon Jun 18 15:58:17 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 15:58:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 15:58:17 2012] Assessing source extent using major axis lower bound
[Mon Jun 18 15:58:17 2012] Source does appear to be extended
[Mon Jun 18 15:58:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 15:58:35 2012] Counts = 2317.390000, rescaling region sizes by 2.000000
[Mon Jun 18 15:58:35 2012] XMMSAS src. selection expression = ellipse(31837.613000, 13299.650200, 692.288420, 692.288420, 0.000000, X, Y)
[Mon Jun 18 15:58:35 2012] Writing source region out to fullrun_pn_xmm0554710801_pi300-10000_pass1_cl_src1_src.reg
[Mon Jun 18 15:58:35 2012] Extracting stamp from image fullrun_pn_xmm0554710801_pi300-10000_cl_sm2.00.img.gz, (327, 114) - (406, 193)
[Mon Jun 18 15:58:35 2012] XMMSAS bgd. selection expression = annulus(31837.613000, 13299.650200, 2307.628066, 4615.256133, X, Y) && !ellipse(28357.469940, 12938.255875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27418.011719, 16913.535660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26979.161926, 11451.606735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28864.116800, 15576.989800, 352.568810, 352.568810, 0.000000, X, Y) && !ellipse(29484.697144, 14302.598434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26391.630493, 12681.922089, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 18 15:58:35 2012] Writing fullrun_pn_xmm0554710801_pi300-10000_pass1_cl_src1.gif
[Mon Jun 18 15:59:26 2012] Mean detx,y = (12206.61, -2783.12) 
[Mon Jun 18 15:59:34 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 18 16:00:30 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 18 16:00:30 2012] Setting source spectrum file to fullrun_pn_xmm0554710801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun 18 16:00:30 2012] Setting bgd. spectrum file to fullrun_pn_xmm0554710801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jun 18 18:44:47 2012] Updating aperture counts using extracted products
[Mon Jun 18 18:44:47 2012] Error reading totcts from fullrun_pn_xmm0554710801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun 18 18:44:48 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 18 18:44:48 2012] Using photon index=1.80, rate=0.0307, arf fullrun_pn_xmm0554710801_pi300-10000_pass1_cl_src1.arf
[Mon Jun 18 18:44:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 18 18:44:48 2012] Updating source flux to 1.6e-13
[Mon Jun 18 18:47:50 2012] Reading fit data from xmm0554710801/analysis//spectral/fullrun_pn_xmm0554710801_pi300-10000_pass1_cl_src1_pl.csv
[Mon Jun 18 18:47:50 2012] Spectral fit parameter nH value = 8.7701e+19
[Mon Jun 18 18:47:50 2012] Spectral fit parameter PhoIndex value = 1.83155
[Mon Jun 18 18:47:50 2012] Failed to get F(0.3-8.0) from xmm0554710801/analysis//spectral/fullrun_pn_xmm0554710801_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Jun 18 18:47:50 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 18 18:47:50 2012] Using Nh = 8.8e+19, photon index=1.83, rate=0.0307, arf fullrun_pn_xmm0554710801_pi300-10000_pass1_cl_src1.arf
[Mon Jun 18 18:47:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 18 18:47:50 2012] Updating source flux to 1.6e-13