[Mon Jun 18 10:55:47 2012] Detection parameters:
  Position = (366.6, 153.3) = 7 8 20.20 -49 42 53.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1202.3 +/- 45.2
  Background counts = 76.3
  Rate = 0.01 +/- 0.0005

[Mon Jun 18 10:55:47 2012] Off-axis axis estimate = 11.62'
[Mon Jun 18 12:58:24 2012] Using EEF radius (= 12.24 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 12:58:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 18 12:58:24 2012] Initial guess for spatial extent in simple fitting = 12.24"
[Mon Jun 18 12:58:24 2012] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.115
[Mon Jun 18 12:58:24 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 12.24"
[Mon Jun 18 13:34:15 2012] fullrun_mos2_xmm0554710801_pi300-10000_cl_pass0_src2.ximg exists
[Mon Jun 18 13:34:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554710801_pi300-10000_cl_pass0_src2.csv
[Mon Jun 18 13:34:15 2012] fullrun_mos2_xmm0554710801_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Jun 18 13:34:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554710801_pi300-10000_cl_pass0_src2.csv
[Mon Jun 18 13:34:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554710801_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554710801_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 13:34:15 2012] fullrun_mos2_xmm0554710801_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Jun 18 13:34:15 2012] fullrun_mos2_xmm0554710801_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Jun 18 13:34:15 2012] Fit fullrun_mos2_xmm0554710801_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Mon Jun 18 13:34:33 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.726987 pixels away
[Mon Jun 18 13:34:33 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 13:34:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 13:34:33 2012] Assessing source extent using major
[Mon Jun 18 13:34:33 2012] Source does appear to be extended
[Mon Jun 18 13:34:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 15:25:00 2012] Using EEF radius (= 12.24 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 15:25:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 18 15:25:00 2012] Initial guess for spatial extent in simple fitting = 12.24"
[Mon Jun 18 15:25:00 2012] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.115
[Mon Jun 18 15:25:00 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 12.24"
[Mon Jun 18 15:58:07 2012] fullrun_mos2_xmm0554710801_pi300-10000_cl_pass1_src2.ximg exists
[Mon Jun 18 15:58:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554710801_pi300-10000_cl_pass1_src2.csv
[Mon Jun 18 15:58:07 2012] fullrun_mos2_xmm0554710801_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Jun 18 15:58:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554710801_pi300-10000_cl_pass1_src2.csv
[Mon Jun 18 15:58:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554710801_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554710801_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 15:58:07 2012] fullrun_mos2_xmm0554710801_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Jun 18 15:58:07 2012] fullrun_mos2_xmm0554710801_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Jun 18 15:58:07 2012] Fit fullrun_mos2_xmm0554710801_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Mon Jun 18 15:58:25 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.726987 pixels away
[Mon Jun 18 15:58:25 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 15:58:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 15:58:25 2012] Assessing source extent using major
[Mon Jun 18 15:58:25 2012] Source does appear to be extended
[Mon Jun 18 15:58:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 18:15:06 2012] Counts = 1202.260010, rescaling region sizes by 2.000000
[Mon Jun 18 18:15:06 2012] XMMSAS src. selection expression = ellipse(31843.974762, 13289.465805, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jun 18 18:15:06 2012] Writing source region out to fullrun_mos2_xmm0554710801_pi300-10000_pass1_cl_src3_src.reg
[Mon Jun 18 18:15:06 2012] Extracting stamp from image fullrun_mos2_xmm0554710801_pi300-10000_cl_sm2.00.img.gz, (292, 78) - (442, 228)
[Mon Jun 18 18:15:06 2012] XMMSAS bgd. selection expression = annulus(31843.974762, 13289.465805, 4350.000000, 8700.000000, X, Y) && !ellipse(28373.155853, 12935.286224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33799.467560, 9688.371246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27435.274719, 16948.563461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22967.032990, 13541.256836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27032.109400, 11464.159000, 413.731212, 413.731212, 0.000000, X, Y) && !ellipse(39783.584991, 16154.527832, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 18 18:15:06 2012] Writing fullrun_mos2_xmm0554710801_pi300-10000_pass1_cl_src3.gif
[Mon Jun 18 18:15:45 2012] Mean detx,y = (-12050.84, 2765.65) 
[Mon Jun 18 18:15:46 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 18 18:17:16 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 18 18:17:16 2012] Setting source spectrum file to fullrun_mos2_xmm0554710801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jun 18 18:17:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0554710801_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Jun 18 18:29:12 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 18 18:29:12 2012] rmf not generated due to insufficient counts
[Mon Jun 18 18:44:49 2012] Updating aperture counts using extracted products
[Mon Jun 18 18:44:49 2012] Error reading totcts from fullrun_mos2_xmm0554710801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jun 18 18:44:49 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 18 18:44:49 2012] Using photon index=1.80, rate=0.0123, arf fullrun_mos2_xmm0554710801_pi300-10000_pass1_cl_src3.arf
[Mon Jun 18 18:44:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 18 18:44:49 2012] Updating source flux to 2.4e-13
[Mon Jun 18 18:45:19 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting