[Mon Jun 18 10:55:47 2012] Detection parameters:
  Position = (457.8, 186.2) = 7 7 39.32 -49 40 30.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 152.3 +/- 20.6
  Background counts = 80.3
  Rate = 0.002 +/- 0.0002

[Mon Jun 18 10:55:47 2012] Off-axis axis estimate = 14.13'
[Mon Jun 18 12:58:24 2012] Using EEF radius (= 13.49 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 12:58:24 2012] Initial guess for spatial extent in simple fitting = 13.49"
[Mon Jun 18 12:58:24 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.944
[Mon Jun 18 12:58:24 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 13.49"
[Mon Jun 18 13:34:15 2012] fullrun_mos2_xmm0554710801_pi300-10000_cl_pass0_src24.ximg exists
[Mon Jun 18 13:34:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554710801_pi300-10000_cl_pass0_src24.csv
[Mon Jun 18 13:34:15 2012] fullrun_mos2_xmm0554710801_pi300-10000_cl_pass0_src24_1.ximg exists
[Mon Jun 18 13:34:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554710801_pi300-10000_cl_pass0_src24.csv
[Mon Jun 18 13:34:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554710801_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554710801_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 13:34:15 2012] fullrun_mos2_xmm0554710801_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Mon Jun 18 13:34:15 2012] fullrun_mos2_xmm0554710801_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Mon Jun 18 13:34:15 2012] Fit fullrun_mos2_xmm0554710801_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Mon Jun 18 13:34:33 2012] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 14.961993 pixels away
[Mon Jun 18 13:34:33 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 13:34:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 13:34:33 2012] Assessing source extent using major
[Mon Jun 18 13:34:33 2012] Source does appear to be extended
[Mon Jun 18 13:34:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 15:25:00 2012] Using EEF radius (= 13.49 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 15:25:00 2012] Initial guess for spatial extent in simple fitting = 13.49"
[Mon Jun 18 15:25:00 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.944
[Mon Jun 18 15:25:00 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 13.49"
[Mon Jun 18 15:58:07 2012] fullrun_mos2_xmm0554710801_pi300-10000_cl_pass1_src24.ximg exists
[Mon Jun 18 15:58:07 2012] fullrun_mos2_xmm0554710801_pi300-10000_cl_pass1_src24_1.ximg exists
[Mon Jun 18 15:58:07 2012] Fit fullrun_mos2_xmm0554710801_pi300-10000_cl_pass1_src24 appears to have run properly
[Mon Jun 18 15:58:08 2012] fullrun_mos2_xmm0554710801_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Mon Jun 18 15:58:08 2012] fullrun_mos2_xmm0554710801_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Mon Jun 18 15:58:08 2012] Fit fullrun_mos2_xmm0554710801_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Mon Jun 18 15:58:25 2012] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 17.209178 pixels away
[Mon Jun 18 15:58:26 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 15:58:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 15:58:26 2012] Assessing source extent using major
[Mon Jun 18 15:58:26 2012] Source does appear to be extended
[Mon Jun 18 15:58:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 18:15:07 2012] XMMSAS src. selection expression = ellipse(39783.584991, 16154.527832, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 18 18:15:07 2012] Writing source region out to fullrun_mos2_xmm0554710801_pi300-10000_pass1_cl_src26_src.reg
[Mon Jun 18 18:15:07 2012] Extracting stamp from image fullrun_mos2_xmm0554710801_pi300-10000_cl_sm2.00.img.gz, (420, 149) - (495, 224)
[Mon Jun 18 18:15:07 2012] XMMSAS bgd. selection expression = annulus(39783.584991, 16154.527832, 1087.500000, 2175.000000, X, Y)
[Mon Jun 18 18:15:07 2012] Writing fullrun_mos2_xmm0554710801_pi300-10000_pass1_cl_src26.gif
[Mon Jun 18 18:23:24 2012] Mean detx,y = (-10162.07, 10973.18) 
[Mon Jun 18 18:23:25 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 18 18:23:38 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 18 18:23:38 2012] Setting source spectrum file to fullrun_mos2_xmm0554710801_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Mon Jun 18 18:23:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0554710801_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Mon Jun 18 18:41:58 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 18 18:41:58 2012] rmf not generated due to insufficient counts
[Mon Jun 18 18:44:49 2012] Updating aperture counts using extracted products
[Mon Jun 18 18:44:49 2012] Error reading totcts from fullrun_mos2_xmm0554710801_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Mon Jun 18 18:44:50 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 18 18:44:50 2012] Using photon index=1.80, rate=0.00156, arf fullrun_mos2_xmm0554710801_pi300-10000_pass1_cl_src26.arf
[Mon Jun 18 18:44:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 18 18:44:50 2012] Updating source flux to 4.1e-14
[Mon Jun 18 18:45:19 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting