[Sat Aug 25 20:48:09 2012] Detection parameters:
  Position = (213.0, 294.2) = 8 48 15.28 34 43 11.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.0 +/- 8.6
  Background counts = 5.3
  Rate = 0.005 +/- 0.001

[Sat Aug 25 20:48:09 2012] Off-axis axis estimate = 6.20'
[Sat Aug 25 21:33:12 2012] Using EEF radius (= 9.53 ")to estimate initial spatial extent for simple fitting
[Sat Aug 25 21:33:12 2012] Initial guess for spatial extent in simple fitting = 9.53"
[Sat Aug 25 21:33:12 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.036
[Sat Aug 25 21:33:12 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 9.53"
[Sat Aug 25 21:47:50 2012] fullrun_mos2_xmm0554710101_pi300-10000_cl_pass0_src6.ximg exists
[Sat Aug 25 21:47:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554710101_pi300-10000_cl_pass0_src6.csv
[Sat Aug 25 21:47:50 2012] fullrun_mos2_xmm0554710101_pi300-10000_cl_pass0_src6_1.ximg exists
[Sat Aug 25 21:47:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554710101_pi300-10000_cl_pass0_src6.csv
[Sat Aug 25 21:47:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554710101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554710101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 21:47:50 2012] fullrun_mos2_xmm0554710101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sat Aug 25 21:47:50 2012] fullrun_mos2_xmm0554710101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Aug 25 21:47:50 2012] Fit fullrun_mos2_xmm0554710101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sat Aug 25 21:47:59 2012] Spatial fit model total counts = 89.999500, observed total counts = 90.000000
[Sat Aug 25 21:47:59 2012] Offset between fit and detection position for source 10 = 0.081901 pixels
[Sat Aug 25 21:47:59 2012] 90.080300 total counts/ 64.249800 bgd. counts: snr = 3.222530
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.081901 pixels
  Position = (213.0, 294.3) = 8 48 15.28 34 43 10.9
  Extent = 3.1 (2.4-4.4)", rotation angle = 0
  Source counts = 25.8 +/- 9.5
  Background counts = 64.2
  Rate = 0.002 +/- 0.0006
[Sat Aug 25 21:47:59 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 21:47:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 21:47:59 2012] Assessing source extent using major axis lower bound
[Sat Aug 25 21:47:59 2012] Source does appear to be extended
[Sat Aug 25 21:47:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 22:35:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 25 22:35:43 2012] Initial guess for spatial extent in simple fitting = 3.13"
[Sat Aug 25 22:35:43 2012] source mask rpix=0.7, npix_max = 5, mask sum = 6, frac = 1.007
[Sat Aug 25 22:35:43 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 3.13"
[Sat Aug 25 22:51:16 2012] fullrun_mos2_xmm0554710101_pi300-10000_cl_pass1_src6.ximg exists
[Sat Aug 25 22:51:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0554710101_pi300-10000_cl_pass1_src6.csv
[Sat Aug 25 22:51:16 2012] fullrun_mos2_xmm0554710101_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat Aug 25 22:51:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0554710101_pi300-10000_cl_pass1_src6.csv
[Sat Aug 25 22:51:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554710101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554710101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 22:51:16 2012] fullrun_mos2_xmm0554710101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat Aug 25 22:51:16 2012] fullrun_mos2_xmm0554710101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Aug 25 22:51:16 2012] Fit fullrun_mos2_xmm0554710101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sat Aug 25 22:51:25 2012] Spatial fit model total counts = 89.994300, observed total counts = 90.000000
[Sat Aug 25 22:51:25 2012] Offset between fit and detection position for source 10 = 0.003132 pixels
[Sat Aug 25 22:51:25 2012] 90.074300 total counts/ 64.323300 bgd. counts: snr = 3.210775
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.003132 pixels
  Position = (213.0, 294.3) = 8 48 15.28 34 43 10.9
  Extent = 3.1 (2.3-4.5)", rotation angle = 0
  Source counts = 25.8 +/- 9.5
  Background counts = 64.3
  Rate = 0.002 +/- 0.0006
[Sat Aug 25 22:51:25 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 22:51:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 22:51:25 2012] Assessing source extent using major axis lower bound
[Sat Aug 25 22:51:25 2012] Source does appear to be extended
[Sat Aug 25 22:51:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 23:09:28 2012] XMMSAS src. selection expression = ellipse(18481.643724, 25554.778200, 186.520805, 186.520805, 0.000000, X, Y)
[Sat Aug 25 23:09:28 2012] Writing source region out to fullrun_mos2_xmm0554710101_pi300-10000_pass1_cl_src10_src.reg
[Sat Aug 25 23:09:28 2012] Extracting stamp from image fullrun_mos2_xmm0554710101_pi300-10000_cl_sm2.00.img.gz, (202, 284) - (224, 305)
[Sat Aug 25 23:09:28 2012] XMMSAS bgd. selection expression = annulus(18481.643724, 25554.778200, 310.868009, 621.736018, X, Y)
[Sat Aug 25 23:09:28 2012] Writing fullrun_mos2_xmm0554710101_pi300-10000_pass1_cl_src10.gif
[Sat Aug 25 23:12:37 2012] Mean detx,y = (8500.63, -242.53) 
[Sat Aug 25 23:12:38 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 25 23:12:45 2012] grppha failed
[Sat Aug 25 23:12:45 2012] Setting source spectrum file to fullrun_mos2_xmm0554710101_pi300-10000_pass1_cl_src10_src.pi.gz
[Sat Aug 25 23:12:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0554710101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sat Aug 25 23:14:22 2012] Not generating rmf since there are only 25 counts
[Sat Aug 25 23:14:22 2012] rmf not generated due to insufficient counts
[Sat Aug 25 23:14:42 2012] Updating aperture counts using extracted products
[Sat Aug 25 23:14:42 2012] Error reading totcts from fullrun_mos2_xmm0554710101_pi300-10000_pass1_cl_src10_src.pi.gz
[Sat Aug 25 23:14:42 2012] No arf file for this source, not re-computing flux
[Sat Aug 25 23:14:44 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Aug 25 23:14:45 2012] xmm0554710101/analysis//spectral/fullrun_mos2_xmm0554710101_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete