[Tue May 14 03:47:56 2013] Detection parameters:
  Position = (275.7, 248.3) = 5 4 21.82 -8 14 0.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 357.6 +/- 25.2
  Background counts = 21.6
  Rate = 0.01 +/- 0.0009

[Tue May 14 03:47:57 2013] Off-axis axis estimate = 3.99'
[Tue May 14 03:48:20 2013] Using EEF radius (= 8.42 ")to estimate initial spatial extent for simple fitting
[Tue May 14 03:48:20 2013] Initial guess for spatial extent in simple fitting = 8.42"
[Tue May 14 03:48:20 2013] source mask rpix=1.9, npix_max = 23, mask sum = 18, frac = 0.758
[Tue May 14 03:48:20 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 8.42"
[Tue May 14 03:48:21 2013] fullrun_mos2_xmm0554700301_pi300-10000_cl_pass0_src1.ximg exists
[Tue May 14 03:48:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554700301_pi300-10000_cl_pass0_src1.csv
[Tue May 14 03:48:21 2013] fullrun_mos2_xmm0554700301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May 14 03:48:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554700301_pi300-10000_cl_pass0_src1.csv
[Tue May 14 03:48:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554700301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554700301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 03:48:21 2013] fullrun_mos2_xmm0554700301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May 14 03:48:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554700301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue May 14 03:48:21 2013] fullrun_mos2_xmm0554700301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May 14 03:48:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554700301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue May 14 03:48:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554700301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554700301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 03:48:37 2013] Spatial fit model total counts = 657.789000, observed total counts = 414.000000
[Tue May 14 03:48:37 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 14 03:48:37 2013] Vigneting correction estimate = 1.000000
[Tue May 14 03:48:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 03:48:37 2013] Assessing source extent using major
[Tue May 14 03:48:37 2013] Source does appear to be extended
[Tue May 14 03:48:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 03:48:53 2013] Using EEF radius (= 8.42 ")to estimate initial spatial extent for simple fitting
[Tue May 14 03:48:53 2013] Initial guess for spatial extent in simple fitting = 8.42"
[Tue May 14 03:48:53 2013] source mask rpix=1.9, npix_max = 23, mask sum = 18, frac = 0.758
[Tue May 14 03:48:53 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 8.42"
[Tue May 14 03:48:54 2013] fullrun_mos2_xmm0554700301_pi300-10000_cl_pass1_src1.ximg exists
[Tue May 14 03:48:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554700301_pi300-10000_cl_pass1_src1.csv
[Tue May 14 03:48:54 2013] fullrun_mos2_xmm0554700301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May 14 03:48:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554700301_pi300-10000_cl_pass1_src1.csv
[Tue May 14 03:48:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554700301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554700301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 03:48:54 2013] fullrun_mos2_xmm0554700301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May 14 03:48:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554700301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue May 14 03:48:54 2013] fullrun_mos2_xmm0554700301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May 14 03:48:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0554700301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue May 14 03:48:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0554700301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0554700301_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 03:49:10 2013] Spatial fit model total counts = 665.076000, observed total counts = 414.000000
[Tue May 14 03:49:10 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 14 03:49:10 2013] Vigneting correction estimate = 1.000000
[Tue May 14 03:49:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 14 03:49:10 2013] Assessing source extent using major
[Tue May 14 03:49:10 2013] Source does appear to be extended
[Tue May 14 03:49:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 03:53:34 2013] XMMSAS src. selection expression = ellipse(23938.473694, 21555.807922, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 14 03:53:34 2013] Not overwriting source region fullrun_mos2_xmm0554700301_pi300-10000_pass1_cl_src1_src.reg
[Tue May 14 03:53:34 2013] Extracting stamp from image fullrun_mos2_xmm0554700301_pi300-10000_cl_sm2.00.img.gz, (238, 211) - (313, 286)
[Tue May 14 03:53:34 2013] XMMSAS bgd. selection expression = annulus(23938.473694, 21555.807922, 1087.500000, 2175.000000, X, Y)
[Tue May 14 03:53:34 2013] Writing fullrun_mos2_xmm0554700301_pi300-10000_pass1_cl_src1.gif
[Tue May 14 03:53:34 2013] ../../xmm0554700301/products/events/fullrun_mos2_xmm0554700301_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0554700301/products/events/fullrun_mos2_xmm0554700301_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue May 14 03:53:34 2013] Mean detx,y = (2076.86, -6373.36) 
[Tue May 14 03:53:34 2013] ../../xmm0554700301/products/images/fullrun_mos2_xmm0554700301_pi300-10000_pass1_cl_src1_src.img and ../../xmm0554700301/products/images/fullrun_mos2_xmm0554700301_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue May 14 03:53:34 2013] ../../xmm0554700301/products/spectra/fullrun_mos2_xmm0554700301_pi300-10000_pass1_cl_src1_src.pi and ../../xmm0554700301/products/spectra/fullrun_mos2_xmm0554700301_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue May 14 03:53:34 2013] Setting source spectrum file to fullrun_mos2_xmm0554700301_pi300-10000_pass1_cl_src1_src.pi.gz
[Tue May 14 03:53:34 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0554700301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue May 14 03:53:34 2013] ../../xmm0554700301/products/lightcurves/fullrun_mos2_xmm0554700301_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0554700301/products/lightcurves/fullrun_mos2_xmm0554700301_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue May 14 03:53:39 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 14 03:53:39 2013] rmf not generated due to insufficient counts
[Tue May 14 03:54:32 2013] Updating aperture counts using extracted products
[Tue May 14 03:54:33 2013] Total counts from fullrun_mos2_xmm0554700301_pi300-10000_pass1_cl_src1_src.pi.gz = 365.00
[Tue May 14 03:54:33 2013] Total counts from fullrun_mos2_xmm0554700301_pi300-10000_pass1_cl_src1_bgd.pi.gz = 841.00
[Tue May 14 03:54:33 2013] Got source and background scale factors 1024902.000000, 10112068.000000
[Tue May 14 03:54:33 2013] User source parameters:
  Position = (275.7, 248.3) = 5 4 21.82 -8 14 0.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 279.8 +/- 20.1
  Background aperture counts = 85.2
  Rate = 0.01 +/- 0.0008

[Tue May 14 03:54:33 2013] Updating counts from extracted products
[Tue May 14 03:54:33 2013] Set source signif. to 279.76/9.23 = 30.30
[Tue May 14 03:54:37 2013] No arf file for this source, not re-computing flux
[Tue May 14 03:54:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 14 03:54:41 2013] xmm0554700301/analysis//spectral/fullrun_mos2_xmm0554700301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete