[Wed Feb 22 02:57:24 2012] Detection parameters:
  Position = (161.7, 429.8) = 5 7 30.11 -6 10 16.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 152.4 +/- 16.0
  Background counts = 8.0
  Rate = 0.006 +/- 0.0006

[Wed Feb 22 02:57:25 2012] Off-axis axis estimate = 13.75'
[Wed Feb 22 03:39:07 2012] Using EEF radius (= 13.30 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 03:39:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 22 03:39:07 2012] Initial guess for spatial extent in simple fitting = 13.30"
[Wed Feb 22 03:39:07 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.968
[Wed Feb 22 03:39:07 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 13.30"
[Wed Feb 22 03:59:30 2012] fullrun_mos1_xmm0554700101_pi300-10000_cl_pass0_src5.ximg exists
[Wed Feb 22 03:59:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554700101_pi300-10000_cl_pass0_src5.csv
[Wed Feb 22 03:59:31 2012] fullrun_mos1_xmm0554700101_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Feb 22 03:59:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554700101_pi300-10000_cl_pass0_src5.csv
[Wed Feb 22 03:59:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554700101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554700101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 03:59:31 2012] fullrun_mos1_xmm0554700101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Feb 22 03:59:31 2012] fullrun_mos1_xmm0554700101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Feb 22 03:59:31 2012] Fit fullrun_mos1_xmm0554700101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Feb 22 04:21:34 2012] Source 6 is offset by 1.228372 and -2.055382 pixels which is larger than
2 X fitted extent = 1.512000 x 1.512000, not incorporating fit results
[Wed Feb 22 04:21:34 2012] Warning, spatial fit 5 centroid is now closest to src. 2
[Wed Feb 22 04:21:34 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 04:21:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 04:21:34 2012] Assessing source extent using major
[Wed Feb 22 04:21:34 2012] Source does appear to be extended
[Wed Feb 22 04:21:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 04:48:30 2012] Using EEF radius (= 13.30 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 04:48:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 22 04:48:30 2012] Initial guess for spatial extent in simple fitting = 13.30"
[Wed Feb 22 04:48:30 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.968
[Wed Feb 22 04:48:30 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 13.30"
[Wed Feb 22 05:02:37 2012] fullrun_mos1_xmm0554700101_pi300-10000_cl_pass1_src4.ximg exists
[Wed Feb 22 05:02:37 2012] fullrun_mos1_xmm0554700101_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Feb 22 05:02:37 2012] Fit fullrun_mos1_xmm0554700101_pi300-10000_cl_pass1_src4 appears to have run properly
[Wed Feb 22 05:02:37 2012] fullrun_mos1_xmm0554700101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Feb 22 05:02:37 2012] fullrun_mos1_xmm0554700101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Feb 22 05:02:37 2012] Fit fullrun_mos1_xmm0554700101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Feb 22 05:19:29 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 16.667285 pixels away
[Wed Feb 22 05:19:29 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 05:19:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 05:19:29 2012] Assessing source extent using major
[Wed Feb 22 05:19:29 2012] Source does appear to be extended
[Wed Feb 22 05:19:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 05:48:11 2012] XMMSAS src. selection expression = ellipse(14022.256546, 37347.263733, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Feb 22 05:48:11 2012] Writing source region out to fullrun_mos1_xmm0554700101_pi300-10000_pass1_cl_src6_src.reg
[Wed Feb 22 05:48:11 2012] Extracting stamp from image fullrun_mos1_xmm0554700101_pi300-10000_cl_sm2.00.img.gz, (124, 392) - (199, 467)
[Wed Feb 22 05:48:11 2012] XMMSAS bgd. selection expression = annulus(14022.256546, 37347.263733, 1087.500000, 2175.000000, X, Y)
[Wed Feb 22 05:48:11 2012] Writing fullrun_mos1_xmm0554700101_pi300-10000_pass1_cl_src6.gif
[Wed Feb 22 05:49:26 2012] Mean detx,y = (-10435.33, 12377.05) 
[Wed Feb 22 05:49:27 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 05:49:43 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 05:49:43 2012] Setting source spectrum file to fullrun_mos1_xmm0554700101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Feb 22 05:49:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0554700101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed Feb 22 05:58:40 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Feb 22 05:58:40 2012] rmf not generated due to insufficient counts
[Wed Feb 22 06:08:05 2012] Updating aperture counts using extracted products
[Wed Feb 22 06:08:05 2012] Error reading totcts from fullrun_mos1_xmm0554700101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Feb 22 06:08:06 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 22 06:08:06 2012] Using photon index=1.80, rate=0.00573, arf fullrun_mos1_xmm0554700101_pi300-10000_pass1_cl_src6.arf
[Wed Feb 22 06:08:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 22 06:08:06 2012] Updating source flux to 1.3e-13
[Wed Feb 22 06:08:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting