[Sun Jun 2 00:17:58 2013] Detection parameters: Position = (473.6, 230.1) = 19 22 34.84 14 3 38.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 147.6 +/- 18.4 Background counts = 72.5 Rate = 0.002 +/- 0.0002 [Sun Jun 2 00:17:59 2013] Off-axis axis estimate = 13.63' [Sun Jun 2 01:37:58 2013] Using EEF radius (= 13.25 ")to estimate initial spatial extent for simple fitting [Sun Jun 2 01:37:58 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun Jun 2 01:37:58 2013] Initial guess for spatial extent in simple fitting = 13.25" [Sun Jun 2 01:37:58 2013] source mask rpix=3.0, npix_max = 50, mask sum = 45, frac = 0.895 [Sun Jun 2 01:37:58 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 13.25" [Sun Jun 2 01:51:58 2013] fullrun_mos1_xmm0554690101_pi300-10000_cl_pass0_src6.ximg exists [Sun Jun 2 01:51:58 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554690101_pi300-10000_cl_pass0_src6.csv [Sun Jun 2 01:51:58 2013] fullrun_mos1_xmm0554690101_pi300-10000_cl_pass0_src6_1.ximg exists [Sun Jun 2 01:51:58 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554690101_pi300-10000_cl_pass0_src6.csv [Sun Jun 2 01:51:58 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0554690101_pi300-10000_cl_pass0_src6_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0554690101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 2 01:51:58 2013] fullrun_mos1_xmm0554690101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists [Sun Jun 2 01:51:58 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554690101_pi300-10000_cl_pass0_tfrozen_src6.csv [Sun Jun 2 01:51:58 2013] fullrun_mos1_xmm0554690101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists [Sun Jun 2 01:51:58 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554690101_pi300-10000_cl_pass0_tfrozen_src6.csv [Sun Jun 2 01:51:58 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0554690101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0554690101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 2 02:17:23 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.914547 pixels away [Sun Jun 2 02:17:23 2013] Vigneting correction estimate = 1.000000 [Sun Jun 2 02:17:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 2 02:17:23 2013] Assessing source extent using major [Sun Jun 2 02:17:23 2013] Source does appear to be extended [Sun Jun 2 02:17:23 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 2 03:23:35 2013] Using EEF radius (= 13.25 ")to estimate initial spatial extent for simple fitting [Sun Jun 2 03:23:35 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun Jun 2 03:23:35 2013] Initial guess for spatial extent in simple fitting = 13.25" [Sun Jun 2 03:23:35 2013] source mask rpix=3.0, npix_max = 50, mask sum = 45, frac = 0.895 [Sun Jun 2 03:23:35 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 13.25" [Sun Jun 2 03:39:10 2013] fullrun_mos1_xmm0554690101_pi300-10000_cl_pass1_src6.ximg exists [Sun Jun 2 03:39:10 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554690101_pi300-10000_cl_pass1_src6.csv [Sun Jun 2 03:39:10 2013] fullrun_mos1_xmm0554690101_pi300-10000_cl_pass1_src6_1.ximg exists [Sun Jun 2 03:39:10 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554690101_pi300-10000_cl_pass1_src6.csv [Sun Jun 2 03:39:10 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0554690101_pi300-10000_cl_pass1_src6_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0554690101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 2 03:39:10 2013] fullrun_mos1_xmm0554690101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists [Sun Jun 2 03:39:10 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554690101_pi300-10000_cl_pass1_tfrozen_src6.csv [Sun Jun 2 03:39:10 2013] fullrun_mos1_xmm0554690101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists [Sun Jun 2 03:39:10 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554690101_pi300-10000_cl_pass1_tfrozen_src6.csv [Sun Jun 2 03:39:10 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0554690101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0554690101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 2 04:00:53 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 17.411531 pixels away [Sun Jun 2 04:00:53 2013] Vigneting correction estimate = 1.000000 [Sun Jun 2 04:00:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 2 04:00:53 2013] Assessing source extent using major [Sun Jun 2 04:00:53 2013] Source does appear to be extended [Sun Jun 2 04:00:53 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 2 05:02:16 2013] XMMSAS src. selection expression = ellipse(41155.494385, 19967.540192, 652.500000, 652.500000, 0.000000, X, Y) [Sun Jun 2 05:02:16 2013] Writing source region out to fullrun_mos1_xmm0554690101_pi300-10000_pass1_cl_src3_src.reg [Sun Jun 2 05:02:16 2013] Extracting stamp from image fullrun_mos1_xmm0554690101_pi300-10000_cl_sm2.00.img.gz, (436, 193) - (511, 268) [Sun Jun 2 05:02:16 2013] XMMSAS bgd. selection expression = annulus(41155.494385, 19967.540192, 1087.500000, 2175.000000, X, Y) [Sun Jun 2 05:02:16 2013] Writing fullrun_mos1_xmm0554690101_pi300-10000_pass1_cl_src3.gif [Sun Jun 2 05:04:40 2013] Mean detx,y = (2763.23, -17057.40) [Sun Jun 2 05:04:42 2013] Setting backscal keywords in source and bgd. spectrum [Sun Jun 2 05:05:11 2013] Binned source spectrum to 10 counts/bin [Sun Jun 2 05:05:11 2013] Setting source spectrum file to fullrun_mos1_xmm0554690101_pi300-10000_pass1_cl_src3_src_b10.pi.gz [Sun Jun 2 05:05:11 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0554690101_pi300-10000_pass1_cl_src3_bgd.pi.gz [Sun Jun 2 05:15:40 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sun Jun 2 05:15:40 2013] rmf not generated due to insufficient counts [Sun Jun 2 05:44:39 2013] Updating aperture counts using extracted products [Sun Jun 2 05:44:39 2013] Total counts from fullrun_mos1_xmm0554690101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 303.00 [Sun Jun 2 05:44:39 2013] Total counts from fullrun_mos1_xmm0554690101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 1180.00 [Sun Jun 2 05:44:39 2013] Got source and background scale factors 907462.000000, 5908256.000000 [Sun Jun 2 05:44:39 2013] User source parameters: Position = (473.6, 230.1) = 19 22 34.84 14 3 38.7 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 121.8 +/- 18.4 Background aperture counts = 181.2 Rate = 0.002 +/- 0.0003 [Sun Jun 2 05:44:39 2013] Updating counts from extracted products [Sun Jun 2 05:44:39 2013] Set source signif. to 121.76/13.46 = 9.04 [Sun Jun 2 05:44:40 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 2 05:44:40 2013] Using photon index=1.80, rate=0.00184, arf fullrun_mos1_xmm0554690101_pi300-10000_pass1_cl_src3.arf [Sun Jun 2 05:44:40 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 2 05:44:40 2013] Updating source flux to 1.6e-13 [Sun Jun 2 05:44:45 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun Jun 2 05:44:50 2013] xmm0554690101/analysis//spectral/fullrun_mos1_xmm0554690101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete