[Mon Sep  3 17:21:08 2012] Detection parameters:
  Position = (251.2, 303.3) = 15 1 22.06 1 44 2.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1741.3 +/- 55.9
  Background counts = 507.1
  Rate = 0.04 +/- 0.001

[Mon Sep  3 17:21:09 2012] Off-axis axis estimate = 3.44'
[Mon Sep  3 17:26:57 2012] Using EEF radius (= 8.15 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 17:26:57 2012] Initial guess for spatial extent in simple fitting = 8.15"
[Mon Sep  3 17:26:57 2012] source mask rpix=1.9, npix_max = 22, mask sum = 17, frac = 0.754
[Mon Sep  3 17:26:57 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 8.15"
[Mon Sep  3 18:52:42 2012] fullrun_pn_xmm0554680301_pi300-10000_cl_pass0_src10.ximg exists
[Mon Sep  3 18:52:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554680301_pi300-10000_cl_pass0_src10.csv
[Mon Sep  3 18:52:42 2012] fullrun_pn_xmm0554680301_pi300-10000_cl_pass0_src10_1.ximg exists
[Mon Sep  3 18:52:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554680301_pi300-10000_cl_pass0_src10.csv
[Mon Sep  3 18:52:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554680301_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554680301_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 18:52:42 2012] fullrun_pn_xmm0554680301_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Mon Sep  3 18:52:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554680301_pi300-10000_cl_pass0_tfrozen_src10.csv
[Mon Sep  3 18:52:42 2012] fullrun_pn_xmm0554680301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Mon Sep  3 18:52:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554680301_pi300-10000_cl_pass0_tfrozen_src10.csv
[Mon Sep  3 18:52:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554680301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554680301_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 21:09:25 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 11.222756 pixels away
[Mon Sep  3 21:09:26 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 21:09:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 21:09:26 2012] Assessing source extent using major
[Mon Sep  3 21:09:26 2012] Source does appear to be extended
[Mon Sep  3 21:09:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 21:09:53 2012] Using EEF radius (= 8.15 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 21:09:53 2012] Initial guess for spatial extent in simple fitting = 8.15"
[Mon Sep  3 21:09:53 2012] source mask rpix=1.9, npix_max = 22, mask sum = 17, frac = 0.754
[Mon Sep  3 21:09:53 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 8.15"
[Mon Sep  3 23:11:44 2012] fullrun_pn_xmm0554680301_pi300-10000_cl_pass1_src10.ximg exists
[Mon Sep  3 23:11:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554680301_pi300-10000_cl_pass1_src10.csv
[Mon Sep  3 23:11:44 2012] fullrun_pn_xmm0554680301_pi300-10000_cl_pass1_src10_1.ximg exists
[Mon Sep  3 23:11:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554680301_pi300-10000_cl_pass1_src10.csv
[Mon Sep  3 23:11:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554680301_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554680301_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 23:11:45 2012] fullrun_pn_xmm0554680301_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Mon Sep  3 23:11:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554680301_pi300-10000_cl_pass1_tfrozen_src10.csv
[Mon Sep  3 23:11:45 2012] fullrun_pn_xmm0554680301_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Mon Sep  3 23:11:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554680301_pi300-10000_cl_pass1_tfrozen_src10.csv
[Mon Sep  3 23:11:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554680301_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554680301_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 01:32:42 2012] Spatial fit model total counts = 4326.980000, observed total counts = 3375.000000
[Tue Sep  4 01:32:42 2012] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Sep  4 01:32:43 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:32:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:32:43 2012] Assessing source extent using major
[Tue Sep  4 01:32:43 2012] Source does appear to be extended
[Tue Sep  4 01:32:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 01:33:09 2012] Counts = 1741.262695, rescaling region sizes by 2.000000
[Tue Sep  4 01:33:09 2012] XMMSAS src. selection expression = ellipse(21807.669312, 26342.284119, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Sep  4 01:33:09 2012] Writing source region out to fullrun_pn_xmm0554680301_pi300-10000_pass1_cl_src10_src.reg
[Tue Sep  4 01:33:09 2012] Extracting stamp from image fullrun_pn_xmm0554680301_pi300-10000_cl_sm2.00.img.gz, (176, 228) - (326, 378)
[Tue Sep  4 01:33:09 2012] XMMSAS bgd. selection expression = annulus(21807.669312, 26342.284119, 4350.000000, 8700.000000, X, Y) && !ellipse(25013.746120, 24062.950400, 3500.376101, 3500.376101, 0.000000, X, Y) && !ellipse(18745.527115, 34416.868073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25695.996887, 26304.272064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13740.134460, 26419.614502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26708.027679, 25692.986084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17569.002655, 23843.128937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23986.812000, 23785.632000, 1262.128036, 1262.128036, 0.000000, X, Y) && !ellipse(24464.644745, 22517.778137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25369.027374, 22765.253418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17481.174286, 21201.319031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25128.508270, 20963.766922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27397.546800, 20593.801800, 323.889609, 323.889609, 0.000000, X, Y) && !ellipse(25313.115112, 20500.192169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22046.216960, 19403.395200, 462.646413, 462.646413, 0.000000, X, Y) && !ellipse(18816.482773, 18453.415482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12576.930283, 31898.859528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17524.313202, 31189.589691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14260.346298, 29532.179688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14527.001511, 29013.479889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17109.693207, 28469.398010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27139.002655, 26318.075562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24006.362000, 25544.282000, 1185.640034, 1185.640034, 0.000000, X, Y) && !ellipse(22928.302000, 25456.116000, 1255.232036, 1255.232036, 0.000000, X, Y) && !ellipse(27400.000000, 25536.419006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27790.801727, 25091.229004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27802.932556, 24675.440796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27913.583557, 24196.096497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13472.930984, 23317.560577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27178.225403, 22584.095459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30666.746280, 21993.608200, 417.436812, 417.436812, 0.000000, X, Y) && !ellipse(26691.893066, 21355.728897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27250.354584, 21626.283020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25410.671509, 20916.701218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23615.338043, 21289.224396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24492.668579, 21090.500763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26248.537689, 21176.831696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17586.844452, 17079.237366, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep  4 01:33:09 2012] Writing fullrun_pn_xmm0554680301_pi300-10000_pass1_cl_src10.gif
[Tue Sep  4 01:48:48 2012] Mean detx,y = (2676.72, 2616.11) 
[Tue Sep  4 01:48:56 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 01:50:32 2012] grppha failed
[Tue Sep  4 01:50:32 2012] Setting source spectrum file to fullrun_pn_xmm0554680301_pi300-10000_pass1_cl_src10_src.pi.gz
[Tue Sep  4 01:50:32 2012] Setting bgd. spectrum file to fullrun_pn_xmm0554680301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue Sep  4 02:43:21 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Sep  4 02:43:21 2012] rmf not generated due to insufficient counts
[Tue Sep  4 03:19:18 2012] Updating aperture counts using extracted products
[Tue Sep  4 03:19:18 2012] Error reading totcts from fullrun_pn_xmm0554680301_pi300-10000_pass1_cl_src10_src.pi.gz
[Tue Sep  4 03:19:19 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 03:19:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Sep  4 03:19:25 2012] xmm0554680301/analysis//spectral/fullrun_pn_xmm0554680301_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete