[Mon Sep  3 17:21:32 2012] Detection parameters:
  Position = (286.1, 254.5) = 15 1 11.93 1 40 38.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 415.0 +/- 32.1
  Background counts = 200.2
  Rate = 0.007 +/- 0.0006

[Mon Sep  3 17:21:33 2012] Off-axis axis estimate = 3.31'
[Mon Sep  3 18:52:43 2012] Using EEF radius (= 8.08 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 18:52:43 2012] Initial guess for spatial extent in simple fitting = 8.08"
[Mon Sep  3 18:52:43 2012] source mask rpix=1.9, npix_max = 22, mask sum = 18, frac = 0.809
[Mon Sep  3 18:52:43 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 8.08"
[Mon Sep  3 20:01:45 2012] fullrun_mos1_xmm0554680301_pi300-10000_cl_pass0_src8.ximg exists
[Mon Sep  3 20:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554680301_pi300-10000_cl_pass0_src8.csv
[Mon Sep  3 20:01:45 2012] fullrun_mos1_xmm0554680301_pi300-10000_cl_pass0_src8_1.ximg exists
[Mon Sep  3 20:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554680301_pi300-10000_cl_pass0_src8.csv
[Mon Sep  3 20:01:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554680301_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554680301_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 20:01:45 2012] fullrun_mos1_xmm0554680301_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Mon Sep  3 20:01:45 2012] fullrun_mos1_xmm0554680301_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Mon Sep  3 20:01:45 2012] Fit fullrun_mos1_xmm0554680301_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Mon Sep  3 21:09:32 2012] Warning, spatial fit 8 centroid is now closest to src. 9
[Mon Sep  3 21:09:32 2012] Source 7 is offset by 0.900574 and -3.941527 pixels which is larger than
2 X fitted extent = 0.849508 x 4.727035, not incorporating fit results
[Mon Sep  3 21:09:33 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 21:09:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 21:09:33 2012] Assessing source extent using major
[Mon Sep  3 21:09:33 2012] Source does appear to be extended
[Mon Sep  3 21:09:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 21:09:33 2012] Source is confused with source 8
[Mon Sep  3 21:09:33 2012] Source is confused with source 17
[Mon Sep  3 23:11:46 2012] Using EEF radius (= 8.08 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 23:11:46 2012] Initial guess for spatial extent in simple fitting = 8.08"
[Mon Sep  3 23:11:46 2012] source mask rpix=1.9, npix_max = 22, mask sum = 18, frac = 0.809
[Mon Sep  3 23:11:46 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 8.08"
[Tue Sep  4 00:31:32 2012] fullrun_mos1_xmm0554680301_pi300-10000_cl_pass1_src7.ximg exists
[Tue Sep  4 00:31:32 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554680301_pi300-10000_cl_pass1_src7.csv
[Tue Sep  4 00:31:32 2012] fullrun_mos1_xmm0554680301_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Sep  4 00:31:32 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554680301_pi300-10000_cl_pass1_src7.csv
[Tue Sep  4 00:31:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554680301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554680301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 00:31:32 2012] fullrun_mos1_xmm0554680301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Sep  4 00:31:32 2012] fullrun_mos1_xmm0554680301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Sep  4 00:31:32 2012] Fit fullrun_mos1_xmm0554680301_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Tue Sep  4 01:32:50 2012] Warning, spatial fit 7 centroid is now closest to src. 9
[Tue Sep  4 01:32:50 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:32:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:32:50 2012] Assessing source extent using major
[Tue Sep  4 01:32:50 2012] Source does appear to be extended
[Tue Sep  4 01:32:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 02:43:27 2012] XMMSAS src. selection expression = ellipse(24844.621918, 22090.759155, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Sep  4 02:43:27 2012] Writing source region out to fullrun_mos1_xmm0554680301_pi300-10000_pass1_cl_src7_src.reg
[Tue Sep  4 02:43:27 2012] Extracting stamp from image fullrun_mos1_xmm0554680301_pi300-10000_cl_sm2.00.img.gz, (249, 217) - (324, 292)
[Tue Sep  4 02:43:27 2012] XMMSAS bgd. selection expression = annulus(24844.621918, 22090.759155, 1087.500000, 2175.000000, X, Y) && !ellipse(25003.920980, 24069.072800, 4115.016118, 4115.016118, 0.000000, X, Y) && !ellipse(27132.300000, 23412.930600, 1204.192035, 1204.192035, 0.000000, X, Y) && !ellipse(25023.391000, 22783.180000, 1290.960037, 1290.960037, 0.000000, X, Y) && !ellipse(26113.006000, 22229.214000, 2528.880073, 2528.880073, 0.000000, X, Y) && !ellipse(24129.241400, 21333.748000, 1317.928038, 1317.928038, 0.000000, X, Y) && !ellipse(22651.461517, 23874.131714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27532.443481, 24489.814423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27366.668000, 20737.428000, 1365.640039, 1365.640039, 0.000000, X, Y) && !ellipse(27483.537842, 23971.881927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22811.650000, 23070.232000, 1261.112036, 1261.112036, 0.000000, X, Y) && !ellipse(26337.718000, 21038.524000, 1319.136038, 1319.136038, 0.000000, X, Y)
[Tue Sep  4 02:43:27 2012] Writing fullrun_mos1_xmm0554680301_pi300-10000_pass1_cl_src7.gif
[Tue Sep  4 02:50:47 2012] Mean detx,y = (2045.56, 435.14) 
[Tue Sep  4 02:50:48 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 02:50:57 2012] grppha failed
[Tue Sep  4 02:50:57 2012] Setting source spectrum file to fullrun_mos1_xmm0554680301_pi300-10000_pass1_cl_src7_src.pi.gz
[Tue Sep  4 02:50:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0554680301_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Tue Sep  4 03:04:44 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Sep  4 03:04:44 2012] rmf not generated due to insufficient counts
[Tue Sep  4 03:19:19 2012] Updating aperture counts using extracted products
[Tue Sep  4 03:19:19 2012] Error reading totcts from fullrun_mos1_xmm0554680301_pi300-10000_pass1_cl_src7_src.pi.gz
[Tue Sep  4 03:19:19 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 03:19:22 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Sep  4 03:19:23 2012] xmm0554680301/analysis//spectral/fullrun_mos1_xmm0554680301_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete