[Mon Sep  3 17:21:32 2012] Detection parameters:
  Position = (277.7, 305.9) = 15 1 14.38 1 44 15.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.6 +/- 21.2
  Background counts = 181.6
  Rate = 0.001 +/- 0.0003

[Mon Sep  3 17:21:33 2012] Off-axis axis estimate = 1.60'
[Mon Sep  3 18:52:43 2012] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 18:52:43 2012] Initial guess for spatial extent in simple fitting = 7.23"
[Mon Sep  3 18:52:43 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.856
[Mon Sep  3 18:52:43 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 7.23"
[Mon Sep  3 20:01:45 2012] fullrun_mos1_xmm0554680301_pi300-10000_cl_pass0_src39.ximg exists
[Mon Sep  3 20:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554680301_pi300-10000_cl_pass0_src39.csv
[Mon Sep  3 20:01:45 2012] fullrun_mos1_xmm0554680301_pi300-10000_cl_pass0_src39_1.ximg exists
[Mon Sep  3 20:01:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554680301_pi300-10000_cl_pass0_src39.csv
[Mon Sep  3 20:01:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554680301_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554680301_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 20:01:45 2012] fullrun_mos1_xmm0554680301_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Mon Sep  3 20:01:45 2012] fullrun_mos1_xmm0554680301_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Mon Sep  3 20:01:45 2012] Fit fullrun_mos1_xmm0554680301_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Mon Sep  3 21:09:33 2012] Spatial fit model total counts = 1852.510000, observed total counts = 1846.000000
[Mon Sep  3 21:09:33 2012] Offset between fit and detection position for source 26 = 7.582368 pixels
[Mon Sep  3 21:09:33 2012] 1829.779000 total counts/ 1681.460000 bgd. counts: snr = 3.617042
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 7.582368 pixels
  Position = (281.5, 299.4) = 15 1 13.28 1 43 44.5
  Extent = 14.3 (14.0-14.5)", rotation angle = 0
  Source counts = 148.3 +/- 42.8
  Background counts = 1681.5
  Rate = 0.002 +/- 0.0007
[Mon Sep  3 21:09:33 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 21:09:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 21:09:33 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 21:09:33 2012] Source does appear to be extended
[Mon Sep  3 21:09:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 21:09:33 2012] Source is confused with source 27
[Mon Sep  3 23:11:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 23:11:46 2012] Initial guess for spatial extent in simple fitting = 14.31"
[Mon Sep  3 23:11:46 2012] source mask rpix=3.3, npix_max = 57, mask sum = 49, frac = 0.853
[Mon Sep  3 23:11:46 2012] Giving source the simple spatial ID 36 for pass 1, mean size = 14.31"
[Tue Sep  4 00:31:32 2012] fullrun_mos1_xmm0554680301_pi300-10000_cl_pass1_src36.ximg exists
[Tue Sep  4 00:31:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554680301_pi300-10000_cl_pass1_src36.csv
[Tue Sep  4 00:31:32 2012] fullrun_mos1_xmm0554680301_pi300-10000_cl_pass1_src36_1.ximg exists
[Tue Sep  4 00:31:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554680301_pi300-10000_cl_pass1_src36.csv
[Tue Sep  4 00:31:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554680301_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554680301_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 00:31:33 2012] fullrun_mos1_xmm0554680301_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Tue Sep  4 00:31:33 2012] fullrun_mos1_xmm0554680301_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Tue Sep  4 00:31:33 2012] Fit fullrun_mos1_xmm0554680301_pi300-10000_cl_pass1_tfrozen_src36 appears to have run properly
[Tue Sep  4 01:32:50 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 11.216077 pixels away
[Tue Sep  4 01:32:50 2012] Warning, spatial fit 36 centroid is now closest to src. 27
[Tue Sep  4 01:32:50 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:32:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:32:50 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 01:32:50 2012] Source does appear to be extended
[Tue Sep  4 01:32:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 02:43:28 2012] XMMSAS src. selection expression = ellipse(24441.104000, 25995.268000, 858.576025, 858.576025, 0.000000, X, Y)
[Tue Sep  4 02:43:28 2012] Writing source region out to fullrun_mos1_xmm0554680301_pi300-10000_pass1_cl_src26_src.reg
[Tue Sep  4 02:43:28 2012] Extracting stamp from image fullrun_mos1_xmm0554680301_pi300-10000_cl_sm2.00.img.gz, (232, 250) - (331, 349)
[Tue Sep  4 02:43:28 2012] XMMSAS bgd. selection expression = annulus(24441.104000, 25995.268000, 1430.960041, 2861.920082, X, Y) && !ellipse(25003.920980, 24069.072800, 4115.016118, 4115.016118, 0.000000, X, Y) && !ellipse(21806.653160, 26368.971000, 362.739210, 362.739210, 0.000000, X, Y) && !ellipse(27132.300000, 23412.930600, 1204.192035, 1204.192035, 0.000000, X, Y) && !ellipse(25023.391000, 22783.180000, 1290.960037, 1290.960037, 0.000000, X, Y) && !ellipse(26113.006000, 22229.214000, 2528.880073, 2528.880073, 0.000000, X, Y) && !ellipse(21696.599408, 24521.019297, 416.185594, 240.427186, 123.741259, X, Y) && !ellipse(22651.461517, 23874.131714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27532.443481, 24489.814423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25224.248000, 25783.756000, 1057.488030, 1057.488030, 0.000000, X, Y) && !ellipse(27483.537842, 23971.881927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22811.650000, 23070.232000, 1261.112036, 1261.112036, 0.000000, X, Y) && !ellipse(26032.519196, 26630.179565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28452.206000, 25232.875400, 1175.752034, 1175.752034, 0.000000, X, Y)
[Tue Sep  4 02:43:28 2012] Writing fullrun_mos1_xmm0554680301_pi300-10000_pass1_cl_src26.gif
[Tue Sep  4 03:04:34 2012] Mean detx,y = (-1605.26, 31.99) 
[Tue Sep  4 03:04:35 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 03:04:40 2012] grppha failed
[Tue Sep  4 03:04:40 2012] Setting source spectrum file to fullrun_mos1_xmm0554680301_pi300-10000_pass1_cl_src26_src.pi.gz
[Tue Sep  4 03:04:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0554680301_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Tue Sep  4 03:19:19 2012] Updating aperture counts using extracted products
[Tue Sep  4 03:19:19 2012] Error reading totcts from fullrun_mos1_xmm0554680301_pi300-10000_pass1_cl_src26_src.pi.gz
[Tue Sep  4 03:19:19 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 03:19:22 2012] Flag c found in src. 26 procflags, skipping spectral fitting
[Tue Sep  4 03:19:22 2012] Source 26 has no response, skipping
[Tue Sep  4 03:19:23 2012] xmm0554680301/analysis//spectral/fullrun_mos1_xmm0554680301_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete