[Mon Sep  3 17:21:32 2012] Detection parameters:
  Position = (287.9, 277.1) = 15 1 11.41 1 42 8.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8032.0 +/- 113.7
  Background counts = 233.6
  Rate = 0.1 +/- 0.002

[Mon Sep  3 17:21:33 2012] Off-axis axis estimate = 1.73'
[Mon Sep  3 18:52:43 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 18:52:43 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Mon Sep  3 18:52:43 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Mon Sep  3 18:52:43 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Mon Sep  3 20:01:45 2012] fullrun_mos1_xmm0554680301_pi300-10000_cl_pass0_src1.ximg exists
[Mon Sep  3 20:01:45 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554680301_pi300-10000_cl_pass0_src1.csv
[Mon Sep  3 20:01:45 2012] fullrun_mos1_xmm0554680301_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Sep  3 20:01:45 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554680301_pi300-10000_cl_pass0_src1.csv
[Mon Sep  3 20:01:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554680301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554680301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 20:01:45 2012] fullrun_mos1_xmm0554680301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Sep  3 20:01:45 2012] fullrun_mos1_xmm0554680301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Sep  3 20:01:45 2012] Fit fullrun_mos1_xmm0554680301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Sep  3 21:09:32 2012] Spatial fit model total counts = 20913.000000, observed total counts = 20913.000000
[Mon Sep  3 21:09:32 2012] Offset between fit and detection position for source 1 = 0.359848 pixels
[Mon Sep  3 21:09:32 2012] 20801.580000 total counts/ 13383.300000 bgd. counts: snr = 64.124149
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.359848 pixels
  Position = (288.0, 277.4) = 15 1 11.39 1 42 9.1
  Extent = 12.9 (12.2-13.6)", rotation angle = 0
  Source counts = 7418.3 +/- 144.2
  Background counts = 13383.3
  Rate = 0.1 +/- 0.002
[Mon Sep  3 21:09:33 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 21:09:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 21:09:33 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 21:09:33 2012] Source does appear to be extended
[Mon Sep  3 21:09:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 23:11:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 23:11:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep  3 23:11:46 2012] Initial guess for spatial extent in simple fitting = 12.87"
[Mon Sep  3 23:11:46 2012] source mask rpix=3.0, npix_max = 47, mask sum = 42, frac = 0.878
[Mon Sep  3 23:11:46 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.87"
[Tue Sep  4 00:31:31 2012] fullrun_mos1_xmm0554680301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Sep  4 00:31:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554680301_pi300-10000_cl_pass1_src1.csv
[Tue Sep  4 00:31:31 2012] fullrun_mos1_xmm0554680301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Sep  4 00:31:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554680301_pi300-10000_cl_pass1_src1.csv
[Tue Sep  4 00:31:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554680301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554680301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 00:31:32 2012] fullrun_mos1_xmm0554680301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Sep  4 00:31:32 2012] fullrun_mos1_xmm0554680301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Sep  4 00:31:32 2012] Fit fullrun_mos1_xmm0554680301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Sep  4 01:32:50 2012] Spatial fit model total counts = 34549.900000, observed total counts = 34541.000000
[Tue Sep  4 01:32:50 2012] Offset between fit and detection position for source 1 = 0.223831 pixels
[Tue Sep  4 01:32:50 2012] 33174.500000 total counts/ 20781.400000 bgd. counts: snr = 85.969134
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.223831 pixels
  Position = (288.0, 277.2) = 15 1 11.40 1 42 8.2
  Extent = 17.1 (16.6-17.8)", rotation angle = 0
  Source counts = 12393.1 +/- 182.1
  Background counts = 20781.4
  Rate = 0.2 +/- 0.003
[Tue Sep  4 01:32:50 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:32:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:32:50 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 01:32:50 2012] Source does appear to be extended
[Tue Sep  4 01:32:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 02:43:27 2012] Counts = 12393.100000, rescaling region sizes by 3.000000
[Tue Sep  4 02:43:27 2012] XMMSAS src. selection expression = ellipse(25003.920980, 24069.072800, 3086.262089, 3086.262089, 0.000000, X, Y)
[Tue Sep  4 02:43:27 2012] Writing source region out to fullrun_mos1_xmm0554680301_pi300-10000_pass1_cl_src1_src.reg
[Tue Sep  4 02:43:27 2012] Extracting stamp from image fullrun_mos1_xmm0554680301_pi300-10000_cl_sm2.00.img.gz, (111, 100) - (465, 455)
[Tue Sep  4 02:43:27 2012] XMMSAS bgd. selection expression = annulus(25003.920980, 24069.072800, 15431.310444, 30862.620888, X, Y) && !ellipse(13731.184800, 26420.058000, 496.199214, 496.199214, 0.000000, X, Y) && !ellipse(21806.653160, 26368.971000, 362.739210, 362.739210, 0.000000, X, Y) && !ellipse(27132.300000, 23412.930600, 1204.192035, 1204.192035, 0.000000, X, Y) && !ellipse(34077.611084, 22991.185791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25023.391000, 22783.180000, 1290.960037, 1290.960037, 0.000000, X, Y) && !ellipse(24844.621918, 22090.759155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26113.006000, 22229.214000, 2528.880073, 2528.880073, 0.000000, X, Y) && !ellipse(21696.599408, 24521.019297, 416.185594, 240.427186, 123.741259, X, Y) && !ellipse(24129.241400, 21333.748000, 1317.928038, 1317.928038, 0.000000, X, Y) && !ellipse(22651.461517, 23874.131714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27532.443481, 24489.814423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25224.248000, 25783.756000, 1057.488030, 1057.488030, 0.000000, X, Y) && !ellipse(36089.748932, 36235.271088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14218.261429, 29563.015198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26681.960602, 15450.222900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35089.562225, 15890.590042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27366.668000, 20737.428000, 1365.640039, 1365.640039, 0.000000, X, Y) && !ellipse(17616.660431, 23795.412750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34375.913800, 16815.443000, 443.997613, 443.997613, 0.000000, X, Y) && !ellipse(18746.413895, 10461.544983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27483.537842, 23971.881927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35478.654114, 20995.744095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22811.650000, 23070.232000, 1261.112036, 1261.112036, 0.000000, X, Y) && !ellipse(26032.519196, 26630.179565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28452.206000, 25232.875400, 1175.752034, 1175.752034, 0.000000, X, Y) && !ellipse(37128.513214, 36123.786407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36138.593506, 22917.989288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26337.718000, 21038.524000, 1319.136038, 1319.136038, 0.000000, X, Y) && !ellipse(24441.104000, 25995.268000, 1144.768033, 1144.768033, 0.000000, X, Y)
[Tue Sep  4 02:43:27 2012] Writing fullrun_mos1_xmm0554680301_pi300-10000_pass1_cl_src1.gif
[Tue Sep  4 02:43:39 2012] Mean detx,y = (239.26, -55.95) 
[Tue Sep  4 02:43:41 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 02:49:36 2012] grppha failed
[Tue Sep  4 02:49:36 2012] Setting source spectrum file to fullrun_mos1_xmm0554680301_pi300-10000_pass1_cl_src1_src.pi.gz
[Tue Sep  4 02:49:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0554680301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Sep  4 03:19:19 2012] Updating aperture counts using extracted products
[Tue Sep  4 03:19:19 2012] Error reading totcts from fullrun_mos1_xmm0554680301_pi300-10000_pass1_cl_src1_src.pi.gz
[Tue Sep  4 03:19:19 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 03:19:22 2012] Source 1 has no response, skipping
[Tue Sep  4 03:19:23 2012] xmm0554680301/analysis//spectral/fullrun_mos1_xmm0554680301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete