[Wed Aug  1 00:09:44 2012] Detection parameters:
  Position = (308.2, 295.9) = 15 1 5.69 1 43 30.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1028.5 +/- 48.6
  Background counts = 467.8
  Rate = 0.02 +/- 0.001

[Wed Aug  1 00:09:45 2012] Off-axis axis estimate = 0.73'
[Wed Aug  1 00:15:28 2012] Using EEF radius (= 6.79 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 00:15:28 2012] Initial guess for spatial extent in simple fitting = 6.79"
[Wed Aug  1 00:15:28 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.941
[Wed Aug  1 00:15:28 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 6.79"
[Wed Aug  1 01:49:50 2012] fullrun_pn_xmm0554680201_pi300-10000_cl_pass0_src11.ximg exists
[Wed Aug  1 01:49:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554680201_pi300-10000_cl_pass0_src11.csv
[Wed Aug  1 01:49:50 2012] fullrun_pn_xmm0554680201_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Aug  1 01:49:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554680201_pi300-10000_cl_pass0_src11.csv
[Wed Aug  1 01:49:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554680201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554680201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 01:49:51 2012] fullrun_pn_xmm0554680201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Aug  1 01:49:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554680201_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed Aug  1 01:49:51 2012] fullrun_pn_xmm0554680201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Aug  1 01:49:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554680201_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed Aug  1 01:49:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554680201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554680201_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 05:03:28 2012] Warning, spatial fit 11 centroid is now closest to src. 46
[Wed Aug  1 05:03:28 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 05:03:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 05:03:28 2012] Assessing source extent using major
[Wed Aug  1 05:03:28 2012] Source does appear to be extended
[Wed Aug  1 05:03:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 05:04:07 2012] Using EEF radius (= 6.79 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 05:04:07 2012] Initial guess for spatial extent in simple fitting = 6.79"
[Wed Aug  1 05:04:07 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.941
[Wed Aug  1 05:04:07 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 6.79"
[Wed Aug  1 08:26:29 2012] fullrun_pn_xmm0554680201_pi300-10000_cl_pass1_src10.ximg exists
[Wed Aug  1 08:26:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554680201_pi300-10000_cl_pass1_src10.csv
[Wed Aug  1 08:26:29 2012] fullrun_pn_xmm0554680201_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed Aug  1 08:26:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554680201_pi300-10000_cl_pass1_src10.csv
[Wed Aug  1 08:26:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554680201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554680201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 08:26:30 2012] fullrun_pn_xmm0554680201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed Aug  1 08:26:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554680201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Wed Aug  1 08:26:30 2012] fullrun_pn_xmm0554680201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Aug  1 08:26:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554680201_pi300-10000_cl_pass1_tfrozen_src10.csv
[Wed Aug  1 08:26:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554680201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554680201_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 12:22:52 2012] Spatial fit model total counts = 7924.490000, observed total counts = 6585.000000
[Wed Aug  1 12:22:52 2012] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug  1 12:22:52 2012] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 20.577525 pixels away
[Wed Aug  1 12:22:52 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 12:22:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 12:22:52 2012] Assessing source extent using major
[Wed Aug  1 12:22:52 2012] Source does appear to be extended
[Wed Aug  1 12:22:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 12:23:34 2012] Counts = 1028.495239, rescaling region sizes by 2.000000
[Wed Aug  1 12:23:34 2012] XMMSAS src. selection expression = ellipse(26765.469238, 25692.755096, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Aug  1 12:23:34 2012] Writing source region out to fullrun_pn_xmm0554680201_pi300-10000_pass1_cl_src12_src.reg
[Wed Aug  1 12:23:34 2012] Extracting stamp from image fullrun_pn_xmm0554680201_pi300-10000_cl_sm2.00.img.gz, (233, 221) - (383, 371)
[Wed Aug  1 12:23:34 2012] XMMSAS bgd. selection expression = annulus(26765.469238, 25692.755096, 4350.000000, 8700.000000, X, Y) && !ellipse(25039.736520, 24044.072200, 4260.864123, 4260.864123, 0.000000, X, Y) && !ellipse(18834.169250, 34418.368164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22149.304000, 26457.792000, 2511.952072, 2511.952072, 0.000000, X, Y) && !ellipse(27694.384338, 25008.869995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27854.055145, 24199.117920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17510.179153, 23864.905487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24012.766000, 23754.888000, 1259.080036, 1259.080036, 0.000000, X, Y) && !ellipse(36184.501617, 22921.740845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34137.997380, 22997.104980, 393.303211, 393.303211, 0.000000, X, Y) && !ellipse(27696.094000, 22308.276000, 1261.128036, 1261.128036, 0.000000, X, Y) && !ellipse(25453.818390, 22712.691803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24589.035522, 22506.661530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35516.419250, 20976.212372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27460.910040, 20597.094800, 330.085609, 330.085609, 0.000000, X, Y) && !ellipse(25396.998108, 20577.507950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22105.169000, 19389.953400, 468.817613, 468.817613, 0.000000, X, Y) && !ellipse(34436.167480, 16806.102554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23379.426000, 33508.021400, 1559.136045, 1559.136045, 0.000000, X, Y) && !ellipse(28479.006561, 33110.277710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17569.812400, 31194.313600, 606.132017, 606.132017, 0.000000, X, Y) && !ellipse(22049.402462, 29196.454600, 810.160023, 810.160023, 0.000000, X, Y) && !ellipse(23927.060000, 27057.044000, 1136.176033, 1136.176033, 0.000000, X, Y) && !ellipse(24513.626000, 26438.550000, 1624.968047, 1624.968047, 0.000000, X, Y) && !ellipse(27478.373810, 26392.100433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23112.486000, 25499.872000, 1255.976036, 1255.976036, 0.000000, X, Y) && !ellipse(33492.633789, 25605.789612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27782.287048, 24592.481750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27344.989400, 20768.042000, 1344.920039, 1344.920039, 0.000000, X, Y) && !ellipse(23218.997925, 21371.205063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26638.164000, 20930.996000, 1339.904039, 1339.904039, 0.000000, X, Y) && !ellipse(24546.786041, 20850.506027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25666.231354, 20583.222900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24331.816284, 20076.574280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18882.267761, 18431.921692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17613.060211, 17067.068039, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug  1 12:23:34 2012] Writing fullrun_pn_xmm0554680201_pi300-10000_pass1_cl_src12.gif
[Wed Aug  1 13:03:41 2012] Mean detx,y = (-1428.05, 855.63) 
[Wed Aug  1 13:03:58 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  1 13:07:05 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  1 13:07:06 2012] Setting source spectrum file to fullrun_pn_xmm0554680201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed Aug  1 13:07:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0554680201_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu Aug  2 09:57:33 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug  2 09:57:33 2012] rmf not generated due to insufficient counts
[Thu Aug  2 21:33:47 2012] Updating aperture counts using extracted products
[Thu Aug  2 21:33:47 2012] Error reading totcts from fullrun_pn_xmm0554680201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Aug  2 21:33:48 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 21:33:48 2012] Using photon index=1.80, rate=0.0215, arf fullrun_pn_xmm0554680201_pi300-10000_pass1_cl_src12.arf
[Thu Aug  2 21:33:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 21:33:48 2012] Updating source flux to 6.3e-14
[Thu Aug  2 21:50:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting