[Wed Aug  1 00:09:43 2012] Detection parameters:
  Position = (288.9, 277.0) = 15 1 11.30 1 42 6.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 26049.2 +/- 198.9
  Background counts = 593.0
  Rate = 0.5 +/- 0.004

[Wed Aug  1 00:09:45 2012] Off-axis axis estimate = 1.70'
[Wed Aug  1 00:15:28 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 00:15:28 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Wed Aug  1 00:15:28 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Wed Aug  1 00:15:28 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Wed Aug  1 01:49:50 2012] fullrun_pn_xmm0554680201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Aug  1 01:49:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554680201_pi300-10000_cl_pass0_src1.csv
[Wed Aug  1 01:49:50 2012] fullrun_pn_xmm0554680201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Aug  1 01:49:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554680201_pi300-10000_cl_pass0_src1.csv
[Wed Aug  1 01:49:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554680201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554680201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 01:49:51 2012] fullrun_pn_xmm0554680201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Aug  1 01:49:51 2012] fullrun_pn_xmm0554680201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Aug  1 01:49:51 2012] Fit fullrun_pn_xmm0554680201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Aug  1 05:03:28 2012] Spatial fit model total counts = 55713.900000, observed total counts = 58084.000000
[Wed Aug  1 05:03:28 2012] Offset between fit and detection position for source 1 = 0.219466 pixels
[Wed Aug  1 05:03:28 2012] 55544.700000 total counts/ 25600.000000 bgd. counts: snr = 187.154375
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.219466 pixels
  Position = (288.7, 277.0) = 15 1 11.37 1 42 6.4
  Extent = 14.6 (14.5-29.1)", rotation angle = 0
  Source counts = 29944.7 +/- 235.7
  Background counts = 25600.0
  Rate = 0.6 +/- 0.004
[Wed Aug  1 05:03:28 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 05:03:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 05:03:28 2012] Assessing source extent using major axis lower bound
[Wed Aug  1 05:03:28 2012] Source does appear to be extended
[Wed Aug  1 05:03:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 05:04:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug  1 05:04:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug  1 05:04:07 2012] Initial guess for spatial extent in simple fitting = 14.56"
[Wed Aug  1 05:04:07 2012] source mask rpix=3.3, npix_max = 59, mask sum = 64, frac = 1.081
[Wed Aug  1 05:04:07 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.56"
[Wed Aug  1 08:26:28 2012] fullrun_pn_xmm0554680201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug  1 08:26:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554680201_pi300-10000_cl_pass1_src1.csv
[Wed Aug  1 08:26:29 2012] fullrun_pn_xmm0554680201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug  1 08:26:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554680201_pi300-10000_cl_pass1_src1.csv
[Wed Aug  1 08:26:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554680201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554680201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 08:26:29 2012] fullrun_pn_xmm0554680201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug  1 08:26:29 2012] fullrun_pn_xmm0554680201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug  1 08:26:29 2012] Fit fullrun_pn_xmm0554680201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug  1 12:22:52 2012] Spatial fit model total counts = 110891.000000, observed total counts = 103432.000000
[Wed Aug  1 12:22:52 2012] Offset between fit and detection position for source 1 = 0.290832 pixels
[Wed Aug  1 12:22:52 2012] 109429.800000 total counts/ 72900.000000 bgd. counts: snr = 135.295556
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.290832 pixels
  Position = (288.4, 276.9) = 15 1 11.45 1 42 6.2
  Extent = 17.8 (17.5-18.1)", rotation angle = 0
  Source counts = 36529.8 +/- 330.8
  Background counts = 72900.0
  Rate = 0.7 +/- 0.006
[Wed Aug  1 12:22:52 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 12:22:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 12:22:52 2012] Assessing source extent using major axis lower bound
[Wed Aug  1 12:22:52 2012] Source does appear to be extended
[Wed Aug  1 12:22:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 12:23:33 2012] Counts = 36529.800000, rescaling region sizes by 3.000000
[Wed Aug  1 12:23:33 2012] XMMSAS src. selection expression = ellipse(25039.736520, 24044.072200, 3195.648092, 3195.648092, 0.000000, X, Y)
[Wed Aug  1 12:23:33 2012] Writing source region out to fullrun_pn_xmm0554680201_pi300-10000_pass1_cl_src1_src.reg
[Wed Aug  1 12:23:33 2012] Extracting stamp from image fullrun_pn_xmm0554680201_pi300-10000_cl_sm2.00.img.gz, (105, 93) - (472, 461)
[Wed Aug  1 12:23:33 2012] XMMSAS bgd. selection expression = annulus(25039.736520, 24044.072200, 15978.240460, 31956.480920, X, Y) && !ellipse(27244.720612, 37453.595001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38954.488373, 36420.812500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20766.771713, 8843.809082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36139.822784, 36230.202637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18834.169250, 34418.368164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13804.321121, 26417.371002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22149.304000, 26457.792000, 2511.952072, 2511.952072, 0.000000, X, Y) && !ellipse(26765.469238, 25692.755096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27694.384338, 25008.869995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27854.055145, 24199.117920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17510.179153, 23864.905487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24012.766000, 23754.888000, 1259.080036, 1259.080036, 0.000000, X, Y) && !ellipse(36184.501617, 22921.740845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34137.997380, 22997.104980, 393.303211, 393.303211, 0.000000, X, Y) && !ellipse(27696.094000, 22308.276000, 1261.128036, 1261.128036, 0.000000, X, Y) && !ellipse(25453.818390, 22712.691803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24589.035522, 22506.661530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35516.419250, 20976.212372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18760.014282, 10464.527908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27460.910040, 20597.094800, 330.085609, 330.085609, 0.000000, X, Y) && !ellipse(25396.998108, 20577.507950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22105.169000, 19389.953400, 468.817613, 468.817613, 0.000000, X, Y) && !ellipse(34436.167480, 16806.102554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30876.216583, 39418.117554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23379.426000, 33508.021400, 1559.136045, 1559.136045, 0.000000, X, Y) && !ellipse(28479.006561, 33110.277710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17569.812400, 31194.313600, 606.132017, 606.132017, 0.000000, X, Y) && !ellipse(22049.402462, 29196.454600, 810.160023, 810.160023, 0.000000, X, Y) && !ellipse(14576.868271, 29007.917603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23927.060000, 27057.044000, 1136.176033, 1136.176033, 0.000000, X, Y) && !ellipse(24513.626000, 26438.550000, 1624.968047, 1624.968047, 0.000000, X, Y) && !ellipse(27478.373810, 26392.100433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23112.486000, 25499.872000, 1255.976036, 1255.976036, 0.000000, X, Y) && !ellipse(33492.633789, 25605.789612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27782.287048, 24592.481750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37730.490662, 23561.029419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12722.890518, 23314.788727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27344.989400, 20768.042000, 1344.920039, 1344.920039, 0.000000, X, Y) && !ellipse(23218.997925, 21371.205063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26638.164000, 20930.996000, 1339.904039, 1339.904039, 0.000000, X, Y) && !ellipse(24546.786041, 20850.506027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25666.231354, 20583.222900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24331.816284, 20076.574280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18882.267761, 18431.921692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14164.872772, 17692.632767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17613.060211, 17067.068039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27052.212402, 14966.045120, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug  1 12:23:33 2012] Writing fullrun_pn_xmm0554680201_pi300-10000_pass1_cl_src1.gif
[Wed Aug  1 12:24:53 2012] Mean detx,y = (298.94, -64.65) 
[Wed Aug  1 12:25:18 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  1 12:35:50 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  1 12:35:51 2012] Setting source spectrum file to fullrun_pn_xmm0554680201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Aug  1 12:35:51 2012] Setting bgd. spectrum file to fullrun_pn_xmm0554680201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Aug  2 21:33:47 2012] Updating aperture counts using extracted products
[Thu Aug  2 21:33:47 2012] Error reading totcts from fullrun_pn_xmm0554680201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Aug  2 21:33:48 2012] No arf file for this source, not re-computing flux
[Thu Aug  2 21:50:01 2012] Source 1 has no response, skipping
[Thu Aug  2 22:00:24 2012] xmm0554680201/analysis//spectral/fullrun_pn_xmm0554680201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete