[Wed Aug 1 00:10:16 2012] Detection parameters: Position = (310.3, 270.0) = 15 1 5.10 1 41 35.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 492.3 +/- 34.4 Background counts = 163.2 Rate = 0.008 +/- 0.0006 [Wed Aug 1 00:10:17 2012] Off-axis axis estimate = 2.23' [Wed Aug 1 01:49:52 2012] Using EEF radius (= 7.55 ")to estimate initial spatial extent for simple fitting [Wed Aug 1 01:49:52 2012] Initial guess for spatial extent in simple fitting = 7.55" [Wed Aug 1 01:49:52 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.801 [Wed Aug 1 01:49:52 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.55" [Wed Aug 1 03:45:31 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_src7.ximg exists [Wed Aug 1 03:45:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_src7.csv [Wed Aug 1 03:45:31 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_src7_1.ximg exists [Wed Aug 1 03:45:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_src7.csv [Wed Aug 1 03:45:31 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_src7_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 1 03:45:32 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists [Wed Aug 1 03:45:32 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists [Wed Aug 1 03:45:32 2012] Fit fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly [Wed Aug 1 05:03:42 2012] Source 8 is offset by 5.215343 and -2.855896 pixels which is larger than 2 X fitted extent = 1.441209 x 1.441209, not incorporating fit results [Wed Aug 1 05:03:42 2012] Spatial fit model total counts = 2089.280000, observed total counts = 2085.000000 [Wed Aug 1 05:03:42 2012] Offset between fit and detection position for source 8 = 2.788483 pixels [Wed Aug 1 05:03:42 2012] Warning, changing simple spatial fit ID from 7 to 21 [Wed Aug 1 05:03:42 2012] 2088.646000 total counts/ 1903.370000 bgd. counts: snr = 4.246758 Spatial fit parameters: Offset between fit and detection position for source 8 = 2.788483 pixels Position = (307.8, 268.8) = 15 1 5.83 1 41 30.7 Extent = 10.5 (6.7-13.5)", rotation angle = 0 Source counts = 185.3 +/- 45.7 Background counts = 1903.4 Rate = 0.003 +/- 0.0007 [Wed Aug 1 05:03:42 2012] Vigneting correction estimate = 1.000000 [Wed Aug 1 05:03:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Aug 1 05:03:42 2012] Assessing source extent using major axis lower bound [Wed Aug 1 05:03:42 2012] Source does appear to be extended [Wed Aug 1 05:03:42 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Aug 1 08:26:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Wed Aug 1 08:26:30 2012] Initial guess for spatial extent in simple fitting = 10.46" [Wed Aug 1 08:26:30 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.067 [Wed Aug 1 08:26:30 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 10.46" [Wed Aug 1 11:10:26 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_src7.ximg exists [Wed Aug 1 11:10:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_src7.csv [Wed Aug 1 11:10:26 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_src7_1.ximg exists [Wed Aug 1 11:10:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_src7.csv [Wed Aug 1 11:10:26 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_src7_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 1 11:10:27 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists [Wed Aug 1 11:10:27 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists [Wed Aug 1 11:10:27 2012] Fit fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly [Wed Aug 1 12:23:06 2012] Warning, spatial fit 7 centroid is now closest to src. 32 [Wed Aug 1 12:23:06 2012] Spatial fit model total counts = 2092.210000, observed total counts = 2085.000000 [Wed Aug 1 12:23:06 2012] Offset between fit and detection position for source 8 = 1.182581 pixels [Wed Aug 1 12:23:06 2012] Warning, changing simple spatial fit ID from 7 to 20 [Wed Aug 1 12:23:06 2012] 2093.389000 total counts/ 1921.780000 bgd. counts: snr = 3.914608 Spatial fit parameters: Offset between fit and detection position for source 8 = 1.182581 pixels Position = (308.9, 268.5) = 15 1 5.50 1 41 29.4 Extent = 15.8 (9.5-31.6)" x 5.5 (3.9-9.0)", rotation angle = 314 (295-332) degrees Source counts = 171.6 +/- 45.8 Background counts = 1921.8 Rate = 0.003 +/- 0.0007 [Wed Aug 1 12:23:06 2012] Vigneting correction estimate = 1.000000 [Wed Aug 1 12:23:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Aug 1 12:23:06 2012] Assessing source extent using major axis lower bound [Wed Aug 1 12:23:06 2012] Source does appear to be extended [Wed Aug 1 12:23:06 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.05 [Wed Aug 1 12:23:06 2012] Source is confused with source 9 [Wed Aug 1 12:23:06 2012] Source is confused with source 32 [Wed Aug 1 12:23:06 2012] Source is confused with source 24 [Thu Aug 2 15:08:20 2012] XMMSAS src. selection expression = ellipse(26825.370000, 23306.968000, 949.182027, 327.475809, 313.614000, X, Y) [Thu Aug 2 15:08:20 2012] Writing source region out to fullrun_mos1_xmm0554680201_pi300-10000_pass1_cl_src8_src.reg [Thu Aug 2 15:08:20 2012] Extracting stamp from image fullrun_mos1_xmm0554680201_pi300-10000_cl_sm2.00.img.gz, (254, 214) - (363, 323) [Thu Aug 2 15:08:20 2012] XMMSAS bgd. selection expression = annulus(26825.370000, 23306.968000, 1581.970046, 3163.940091, X, Y) && !ellipse(25058.718400, 24067.450800, 4114.368118, 4114.368118, 0.000000, X, Y) && !ellipse(23822.614000, 23849.302000, 2233.736064, 875.360025, 306.330000, X, Y) && !ellipse(24351.032000, 22457.542000, 2726.888078, 576.031217, 355.121000, X, Y) && !ellipse(25516.453186, 22186.731827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26223.140000, 25247.176000, 1086.648031, 1086.648031, 0.000000, X, Y) && !ellipse(24725.079224, 21991.854004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26332.936000, 22158.706000, 2533.168073, 2533.168073, 0.000000, X, Y) && !ellipse(23759.486800, 22451.298000, 842.160024, 842.160024, 0.000000, X, Y) && !ellipse(25576.406800, 20559.042000, 872.104025, 872.104025, 0.000000, X, Y) && !ellipse(27992.557404, 23295.191956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26132.011108, 26123.730072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27352.836060, 22663.982635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23763.087769, 21758.783585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23110.456000, 23442.050000, 1322.840038, 1322.840038, 0.000000, X, Y) && !ellipse(28275.440000, 25115.533800, 1175.608034, 1175.608034, 0.000000, X, Y) && !ellipse(25237.943268, 26560.880646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27560.850000, 24793.060000, 2351.216068, 2351.216068, 0.000000, X, Y) && !ellipse(23679.115000, 21538.084400, 1364.928039, 1364.928039, 0.000000, X, Y) && !ellipse(24146.468000, 20698.728000, 1350.496039, 1350.496039, 0.000000, X, Y) [Thu Aug 2 15:08:20 2012] Writing fullrun_mos1_xmm0554680201_pi300-10000_pass1_cl_src8.gif [Thu Aug 2 15:27:52 2012] Mean detx,y = (1170.62, -1528.84) [Thu Aug 2 15:27:53 2012] Setting backscal keywords in source and bgd. spectrum [Thu Aug 2 15:28:03 2012] Binned source spectrum to 10 counts/bin [Thu Aug 2 15:28:03 2012] Setting source spectrum file to fullrun_mos1_xmm0554680201_pi300-10000_pass1_cl_src8_src_b10.pi.gz [Thu Aug 2 15:28:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0554680201_pi300-10000_pass1_cl_src8_bgd.pi.gz [Thu Aug 2 21:33:49 2012] Updating aperture counts using extracted products [Thu Aug 2 21:33:49 2012] Error reading totcts from fullrun_mos1_xmm0554680201_pi300-10000_pass1_cl_src8_src_b10.pi.gz [Thu Aug 2 21:33:49 2012] Calculating source flux in energy range 0.30-8.00 [Thu Aug 2 21:33:49 2012] Using photon index=1.80, rate=0.00259, arf fullrun_mos1_xmm0554680201_pi300-10000_pass1_cl_src8.arf [Thu Aug 2 21:33:49 2012] Assuming count rate is from the 0.30-10.00 bandpass [Thu Aug 2 21:33:50 2012] Updating source flux to 2.9e-14 [Thu Aug 2 21:33:53 2012] Flag b found in src. 8 procflags, skipping spectral fitting [Thu Aug 2 21:33:53 2012] Flag c found in src. 8 procflags, skipping spectral fitting