[Wed Aug  1 00:10:16 2012] Detection parameters:
  Position = (308.2, 296.2) = 15 1 5.70 1 43 31.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 363.8 +/- 30.2
  Background counts = 150.8
  Rate = 0.006 +/- 0.0005

[Wed Aug  1 00:10:17 2012] Off-axis axis estimate = 0.73'
[Wed Aug  1 01:49:52 2012] Using EEF radius (= 6.79 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 01:49:52 2012] Initial guess for spatial extent in simple fitting = 6.79"
[Wed Aug  1 01:49:52 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.941
[Wed Aug  1 01:49:52 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 6.79"
[Wed Aug  1 03:45:31 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_src9.ximg exists
[Wed Aug  1 03:45:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_src9.csv
[Wed Aug  1 03:45:31 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed Aug  1 03:45:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_src9.csv
[Wed Aug  1 03:45:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 03:45:32 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed Aug  1 03:45:32 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Aug  1 03:45:32 2012] Fit fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Wed Aug  1 05:03:42 2012] Spatial fit model total counts = 3107.340000, observed total counts = 3103.000000
[Wed Aug  1 05:03:42 2012] Offset between fit and detection position for source 7 = 8.238729 pixels
[Wed Aug  1 05:03:42 2012] 3013.937000 total counts/ 2786.540000 bgd. counts: snr = 4.307766
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 8.238729 pixels
  Position = (302.0, 290.8) = 15 1 7.50 1 43 6.4
  Extent = 13.6 (13.6-27.2)", rotation angle = 0
  Source counts = 227.4 +/- 54.9
  Background counts = 2786.5
  Rate = 0.003 +/- 0.0008
[Wed Aug  1 05:03:42 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 05:03:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 05:03:42 2012] Assessing source extent using major axis lower bound
[Wed Aug  1 05:03:42 2012] Source does appear to be extended
[Wed Aug  1 05:03:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 08:26:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug  1 08:26:30 2012] Initial guess for spatial extent in simple fitting = 13.58"
[Wed Aug  1 08:26:30 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.067
[Wed Aug  1 08:26:30 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 13.58"
[Wed Aug  1 11:10:26 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_src9.ximg exists
[Wed Aug  1 11:10:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_src9.csv
[Wed Aug  1 11:10:26 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed Aug  1 11:10:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_src9.csv
[Wed Aug  1 11:10:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 11:10:27 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed Aug  1 11:10:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_tfrozen_src9.csv
[Wed Aug  1 11:10:27 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Aug  1 11:10:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_tfrozen_src9.csv
[Wed Aug  1 11:10:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 12:23:06 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 17.388270 pixels away
[Wed Aug  1 12:23:06 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 12:23:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 12:23:06 2012] Assessing source extent using major axis lower bound
[Wed Aug  1 12:23:06 2012] Source does appear to be extended
[Wed Aug  1 12:23:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 12:23:06 2012] Source is confused with source 24
[Thu Aug  2 15:08:21 2012] XMMSAS src. selection expression = ellipse(26223.140000, 25247.176000, 814.986023, 814.986023, 0.000000, X, Y)
[Thu Aug  2 15:08:21 2012] Writing source region out to fullrun_mos1_xmm0554680201_pi300-10000_pass1_cl_src7_src.reg
[Thu Aug  2 15:08:21 2012] Extracting stamp from image fullrun_mos1_xmm0554680201_pi300-10000_cl_sm2.00.img.gz, (255, 244) - (349, 338)
[Thu Aug  2 15:08:21 2012] XMMSAS bgd. selection expression = annulus(26223.140000, 25247.176000, 1358.310039, 2716.620078, X, Y) && !ellipse(25058.718400, 24067.450800, 4114.368118, 4114.368118, 0.000000, X, Y) && !ellipse(23822.614000, 23849.302000, 2233.736064, 875.360025, 306.330000, X, Y) && !ellipse(24351.032000, 22457.542000, 2726.888078, 576.031217, 355.121000, X, Y) && !ellipse(26825.370000, 23306.968000, 1265.576036, 436.634413, 313.614000, X, Y) && !ellipse(25516.453186, 22186.731827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24725.079224, 21991.854004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26332.936000, 22158.706000, 2533.168073, 2533.168073, 0.000000, X, Y) && !ellipse(23759.486800, 22451.298000, 842.160024, 842.160024, 0.000000, X, Y) && !ellipse(27992.557404, 23295.191956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26132.011108, 26123.730072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27352.836060, 22663.982635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23763.087769, 21758.783585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23110.456000, 23442.050000, 1322.840038, 1322.840038, 0.000000, X, Y) && !ellipse(28275.440000, 25115.533800, 1175.608034, 1175.608034, 0.000000, X, Y) && !ellipse(25237.943268, 26560.880646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27560.850000, 24793.060000, 2351.216068, 2351.216068, 0.000000, X, Y) && !ellipse(23679.115000, 21538.084400, 1364.928039, 1364.928039, 0.000000, X, Y)
[Thu Aug  2 15:08:21 2012] Writing fullrun_mos1_xmm0554680201_pi300-10000_pass1_cl_src7.gif
[Thu Aug  2 15:28:25 2012] Mean detx,y = (-582.44, -1357.74) 
[Thu Aug  2 15:28:26 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  2 15:28:37 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  2 15:28:37 2012] Setting source spectrum file to fullrun_mos1_xmm0554680201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Aug  2 15:28:37 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0554680201_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu Aug  2 21:33:49 2012] Updating aperture counts using extracted products
[Thu Aug  2 21:33:49 2012] Error reading totcts from fullrun_mos1_xmm0554680201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Aug  2 21:33:50 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 21:33:50 2012] Using photon index=1.80, rate=0.00343, arf fullrun_mos1_xmm0554680201_pi300-10000_pass1_cl_src7.arf
[Thu Aug  2 21:33:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 21:33:50 2012] Updating source flux to 3.3e-14
[Thu Aug  2 21:33:53 2012] Flag c found in src. 7 procflags, skipping spectral fitting