[Wed Aug  1 00:10:16 2012] Detection parameters:
  Position = (393.0, 264.7) = 15 0 41.08 1 41 12.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 354.6 +/- 25.2
  Background counts = 48.4
  Rate = 0.01 +/- 0.0007

[Wed Aug  1 00:10:17 2012] Off-axis axis estimate = 7.28'
[Wed Aug  1 01:49:52 2012] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 01:49:52 2012] Initial guess for spatial extent in simple fitting = 10.07"
[Wed Aug  1 01:49:52 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.136
[Wed Aug  1 01:49:52 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 10.07"
[Wed Aug  1 03:45:31 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_src6.ximg exists
[Wed Aug  1 03:45:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_src6.csv
[Wed Aug  1 03:45:31 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed Aug  1 03:45:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_src6.csv
[Wed Aug  1 03:45:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 03:45:32 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed Aug  1 03:45:32 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Aug  1 03:45:32 2012] Fit fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Wed Aug  1 05:03:42 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 12.930719 pixels away
[Wed Aug  1 05:03:42 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 05:03:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 05:03:42 2012] Assessing source extent using major
[Wed Aug  1 05:03:42 2012] Source does appear to be extended
[Wed Aug  1 05:03:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 08:26:30 2012] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 08:26:30 2012] Initial guess for spatial extent in simple fitting = 10.07"
[Wed Aug  1 08:26:30 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.136
[Wed Aug  1 08:26:30 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 10.07"
[Wed Aug  1 11:10:26 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_src6.ximg exists
[Wed Aug  1 11:10:26 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_src6.csv
[Wed Aug  1 11:10:26 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed Aug  1 11:10:26 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_src6.csv
[Wed Aug  1 11:10:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 11:10:27 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed Aug  1 11:10:27 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Aug  1 11:10:27 2012] Fit fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Wed Aug  1 12:23:06 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 12.930719 pixels away
[Wed Aug  1 12:23:06 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 13.102383 pixels away
[Wed Aug  1 12:23:06 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 12:23:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 12:23:06 2012] Assessing source extent using major
[Wed Aug  1 12:23:06 2012] Source does appear to be extended
[Wed Aug  1 12:23:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 15:08:20 2012] XMMSAS src. selection expression = ellipse(34145.078033, 22983.682678, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug  2 15:08:20 2012] Writing source region out to fullrun_mos1_xmm0554680201_pi300-10000_pass1_cl_src5_src.reg
[Thu Aug  2 15:08:20 2012] Extracting stamp from image fullrun_mos1_xmm0554680201_pi300-10000_cl_sm2.00.img.gz, (356, 227) - (431, 302)
[Thu Aug  2 15:08:20 2012] XMMSAS bgd. selection expression = annulus(34145.078033, 22983.682678, 1087.500000, 2175.000000, X, Y) && !ellipse(35532.176849, 20999.060226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36179.934000, 22972.463200, 738.890421, 738.890421, 0.000000, X, Y)
[Thu Aug  2 15:08:20 2012] Writing fullrun_mos1_xmm0554680201_pi300-10000_pass1_cl_src5.gif
[Thu Aug  2 15:27:30 2012] Mean detx,y = (3381.13, -8661.15) 
[Thu Aug  2 15:27:31 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  2 15:27:47 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  2 15:27:47 2012] Setting source spectrum file to fullrun_mos1_xmm0554680201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Aug  2 15:27:47 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0554680201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Aug  2 17:01:15 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug  2 17:01:15 2012] rmf not generated due to insufficient counts
[Thu Aug  2 21:33:49 2012] Updating aperture counts using extracted products
[Thu Aug  2 21:33:49 2012] Error reading totcts from fullrun_mos1_xmm0554680201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Aug  2 21:33:49 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 21:33:49 2012] Using photon index=1.80, rate=0.00966, arf fullrun_mos1_xmm0554680201_pi300-10000_pass1_cl_src5.arf
[Thu Aug  2 21:33:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 21:33:49 2012] Updating source flux to 1.5e-13
[Thu Aug  2 21:33:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting