[Wed Aug  1 00:10:16 2012] Detection parameters:
  Position = (273.7, 250.7) = 15 1 15.71 1 40 21.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 139.1 +/- 20.9
  Background counts = 147.8
  Rate = 0.002 +/- 0.0004

[Wed Aug  1 00:10:17 2012] Off-axis axis estimate = 3.90'
[Wed Aug  1 01:49:52 2012] Using EEF radius (= 8.38 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 01:49:52 2012] Initial guess for spatial extent in simple fitting = 8.38"
[Wed Aug  1 01:49:52 2012] source mask rpix=1.9, npix_max = 23, mask sum = 24, frac = 1.019
[Wed Aug  1 01:49:52 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 8.38"
[Wed Aug  1 03:45:32 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_src23.ximg exists
[Wed Aug  1 03:45:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_src23.csv
[Wed Aug  1 03:45:32 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_src23_1.ximg exists
[Wed Aug  1 03:45:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_src23.csv
[Wed Aug  1 03:45:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 03:45:32 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Wed Aug  1 03:45:32 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Wed Aug  1 03:45:33 2012] Fit fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Wed Aug  1 05:03:42 2012] Warning, spatial fit 23 centroid is now closest to src. 10
[Wed Aug  1 05:03:42 2012] Source 34 is offset by 0.346457 and 5.328317 pixels which is larger than
2 X fitted extent = 1.046041 x 1.046041, not incorporating fit results
[Wed Aug  1 05:03:42 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 05:03:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 05:03:42 2012] Assessing source extent using major
[Wed Aug  1 05:03:42 2012] Source does appear to be extended
[Wed Aug  1 05:03:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 05:03:42 2012] Source is confused with source 35
[Wed Aug  1 08:26:30 2012] Using EEF radius (= 8.38 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 08:26:30 2012] Initial guess for spatial extent in simple fitting = 8.38"
[Wed Aug  1 08:26:30 2012] source mask rpix=1.9, npix_max = 23, mask sum = 24, frac = 1.019
[Wed Aug  1 08:26:30 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 8.38"
[Wed Aug  1 11:10:26 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_src22.ximg exists
[Wed Aug  1 11:10:26 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_src22.csv
[Wed Aug  1 11:10:26 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_src22_1.ximg exists
[Wed Aug  1 11:10:26 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_src22.csv
[Wed Aug  1 11:10:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 11:10:27 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Wed Aug  1 11:10:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_tfrozen_src22.csv
[Wed Aug  1 11:10:27 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Wed Aug  1 11:10:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_tfrozen_src22.csv
[Wed Aug  1 11:10:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 12:23:06 2012] Warning, spatial fit 22 centroid is now closest to src. 28
[Wed Aug  1 12:23:06 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 12:23:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 12:23:06 2012] Assessing source extent using major
[Wed Aug  1 12:23:06 2012] Source does appear to be extended
[Wed Aug  1 12:23:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 15:08:21 2012] XMMSAS src. selection expression = ellipse(23763.087769, 21758.783585, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug  2 15:08:21 2012] Writing source region out to fullrun_mos1_xmm0554680201_pi300-10000_pass1_cl_src34_src.reg
[Thu Aug  2 15:08:21 2012] Extracting stamp from image fullrun_mos1_xmm0554680201_pi300-10000_cl_sm2.00.img.gz, (236, 213) - (311, 288)
[Thu Aug  2 15:08:21 2012] XMMSAS bgd. selection expression = annulus(23763.087769, 21758.783585, 1087.500000, 2175.000000, X, Y) && !ellipse(25058.718400, 24067.450800, 4114.368118, 4114.368118, 0.000000, X, Y) && !ellipse(23822.614000, 23849.302000, 2233.736064, 875.360025, 306.330000, X, Y) && !ellipse(24351.032000, 22457.542000, 2726.888078, 576.031217, 355.121000, X, Y) && !ellipse(26825.370000, 23306.968000, 1265.576036, 436.634413, 313.614000, X, Y) && !ellipse(25516.453186, 22186.731827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24725.079224, 21991.854004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26332.936000, 22158.706000, 2533.168073, 2533.168073, 0.000000, X, Y) && !ellipse(23759.486800, 22451.298000, 842.160024, 842.160024, 0.000000, X, Y) && !ellipse(25576.406800, 20559.042000, 872.104025, 872.104025, 0.000000, X, Y) && !ellipse(23110.456000, 23442.050000, 1322.840038, 1322.840038, 0.000000, X, Y) && !ellipse(27560.850000, 24793.060000, 2351.216068, 2351.216068, 0.000000, X, Y) && !ellipse(23679.115000, 21538.084400, 1364.928039, 1364.928039, 0.000000, X, Y) && !ellipse(24146.468000, 20698.728000, 1350.496039, 1350.496039, 0.000000, X, Y)
[Thu Aug  2 15:08:21 2012] Writing fullrun_mos1_xmm0554680201_pi300-10000_pass1_cl_src34.gif
[Thu Aug  2 15:42:36 2012] Mean detx,y = (2092.76, 1680.21) 
[Thu Aug  2 15:42:37 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  2 15:42:46 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  2 15:42:46 2012] Setting source spectrum file to fullrun_mos1_xmm0554680201_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Thu Aug  2 15:42:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0554680201_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Thu Aug  2 19:33:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug  2 19:33:36 2012] rmf not generated due to insufficient counts
[Thu Aug  2 21:33:49 2012] Updating aperture counts using extracted products
[Thu Aug  2 21:33:49 2012] Error reading totcts from fullrun_mos1_xmm0554680201_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Thu Aug  2 21:33:50 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 21:33:50 2012] Using photon index=1.80, rate=0.00249, arf fullrun_mos1_xmm0554680201_pi300-10000_pass1_cl_src34.arf
[Thu Aug  2 21:33:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 21:33:50 2012] Updating source flux to 2.5e-14
[Thu Aug  2 21:33:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting