[Wed Aug  1 00:10:16 2012] Detection parameters:
  Position = (416.2, 264.2) = 15 0 34.37 1 41 9.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.2 +/- 16.2
  Background counts = 44.0
  Rate = 0.002 +/- 0.0002

[Wed Aug  1 00:10:17 2012] Off-axis axis estimate = 8.89'
[Wed Aug  1 01:49:52 2012] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 01:49:52 2012] Initial guess for spatial extent in simple fitting = 10.87"
[Wed Aug  1 01:49:52 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.000
[Wed Aug  1 01:49:52 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 10.87"
[Wed Aug  1 03:45:32 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_src38.ximg exists
[Wed Aug  1 03:45:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_src38.csv
[Wed Aug  1 03:45:32 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_src38_1.ximg exists
[Wed Aug  1 03:45:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_src38.csv
[Wed Aug  1 03:45:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 03:45:33 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Wed Aug  1 03:45:33 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Wed Aug  1 03:45:33 2012] Fit fullrun_mos1_xmm0554680201_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Wed Aug  1 05:03:42 2012] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 14.604443 pixels away
[Wed Aug  1 05:03:42 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 05:03:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 05:03:42 2012] Assessing source extent using major
[Wed Aug  1 05:03:42 2012] Source does appear to be extended
[Wed Aug  1 05:03:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 08:26:30 2012] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 08:26:30 2012] Initial guess for spatial extent in simple fitting = 10.87"
[Wed Aug  1 08:26:30 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.000
[Wed Aug  1 08:26:30 2012] Giving source the simple spatial ID 34 for pass 1, mean size = 10.87"
[Wed Aug  1 11:10:27 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_src34.ximg exists
[Wed Aug  1 11:10:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_src34.csv
[Wed Aug  1 11:10:27 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_src34_1.ximg exists
[Wed Aug  1 11:10:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_src34.csv
[Wed Aug  1 11:10:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 11:10:27 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Wed Aug  1 11:10:27 2012] fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Wed Aug  1 11:10:27 2012] Fit fullrun_mos1_xmm0554680201_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly
[Wed Aug  1 12:23:06 2012] Spatial fit model total counts = 554.929000, observed total counts = 555.000000
[Wed Aug  1 12:23:06 2012] Offset between fit and detection position for source 30 = 0.482189 pixels
[Wed Aug  1 12:23:06 2012] 553.185000 total counts/ 421.341000 bgd. counts: snr = 6.423083
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.482189 pixels
  Position = (416.4, 264.6) = 15 0 34.30 1 41 12.6
  Extent = 9.2 (7.1-11.8)", rotation angle = 0
  Source counts = 131.8 +/- 23.5
  Background counts = 421.3
  Rate = 0.002 +/- 0.0004
[Wed Aug  1 12:23:06 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 12:23:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 12:23:06 2012] Assessing source extent using major axis lower bound
[Wed Aug  1 12:23:06 2012] Source does appear to be extended
[Wed Aug  1 12:23:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 15:08:21 2012] XMMSAS src. selection expression = ellipse(36179.934000, 22972.463200, 554.167816, 554.167816, 0.000000, X, Y)
[Thu Aug  2 15:08:21 2012] Writing source region out to fullrun_mos1_xmm0554680201_pi300-10000_pass1_cl_src30_src.reg
[Thu Aug  2 15:08:21 2012] Extracting stamp from image fullrun_mos1_xmm0554680201_pi300-10000_cl_sm2.00.img.gz, (385, 233) - (448, 296)
[Thu Aug  2 15:08:21 2012] XMMSAS bgd. selection expression = annulus(36179.934000, 22972.463200, 923.613027, 1847.226053, X, Y) && !ellipse(34145.078033, 22983.682678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35532.176849, 20999.060226, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug  2 15:08:21 2012] Writing fullrun_mos1_xmm0554680201_pi300-10000_pass1_cl_src30.gif
[Thu Aug  2 15:44:26 2012] Mean detx,y = (3867.64, -10653.24) 
[Thu Aug  2 15:44:27 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  2 15:44:34 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  2 15:44:34 2012] Setting source spectrum file to fullrun_mos1_xmm0554680201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Thu Aug  2 15:44:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0554680201_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Thu Aug  2 21:33:49 2012] Updating aperture counts using extracted products
[Thu Aug  2 21:33:49 2012] Error reading totcts from fullrun_mos1_xmm0554680201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Thu Aug  2 21:33:50 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 21:33:50 2012] Using photon index=1.80, rate=0.00199, arf fullrun_mos1_xmm0554680201_pi300-10000_pass1_cl_src30.arf
[Thu Aug  2 21:33:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 21:33:50 2012] Updating source flux to 3.9e-14