[Fri Jul 27 10:39:03 2012] Detection parameters:
  Position = (466.5, 284.8) = 5 24 15.76 1 39 44.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.8 +/- 16.5
  Background counts = 67.0
  Rate = 0.001 +/- 0.0003

[Fri Jul 27 10:39:05 2012] Off-axis axis estimate = 12.23'
[Fri Jul 27 10:47:18 2012] Using EEF radius (= 12.54 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 10:47:18 2012] Initial guess for spatial extent in simple fitting = 12.54"
[Fri Jul 27 10:47:18 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.070
[Fri Jul 27 10:47:18 2012] Giving source the simple spatial ID 86 for pass 0, mean size = 12.54"
[Fri Jul 27 14:52:15 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src86.ximg exists
[Fri Jul 27 14:52:15 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src86_1.ximg exists
[Fri Jul 27 14:52:15 2012] Fit fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src86 appears to have run properly
[Fri Jul 27 14:52:16 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src86.ximg exists
[Fri Jul 27 14:52:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src86.csv
[Fri Jul 27 14:52:16 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src86_1.ximg exists
[Fri Jul 27 14:52:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src86.csv
[Fri Jul 27 14:52:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src86_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 20:13:15 2012] Source 92 is offset by 5.117378 and -5.824141 pixels which is larger than
2 X fitted extent = 1.523356 x 1.437899, not incorporating fit results
[Fri Jul 27 20:13:16 2012] Warning: source 86 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 92 at 10.444049 pixels away
[Fri Jul 27 20:13:16 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 20:13:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 20:13:16 2012] Assessing source extent using major
[Fri Jul 27 20:13:16 2012] Source does appear to be extended
[Fri Jul 27 20:13:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 20:14:07 2012] Using EEF radius (= 12.54 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 20:14:07 2012] Initial guess for spatial extent in simple fitting = 12.54"
[Fri Jul 27 20:14:07 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.070
[Fri Jul 27 20:14:07 2012] Giving source the simple spatial ID 83 for pass 1, mean size = 12.54"
[Fri Jul 27 23:26:25 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_src83.ximg exists
[Fri Jul 27 23:26:25 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_src83_1.ximg exists
[Fri Jul 27 23:26:25 2012] Fit fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_src83 appears to have run properly
[Fri Jul 27 23:26:27 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src83.ximg exists
[Fri Jul 27 23:26:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src83.csv
[Fri Jul 27 23:26:27 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src83_1.ximg exists
[Fri Jul 27 23:26:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src83.csv
[Fri Jul 27 23:26:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src83_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 03:55:51 2012] Source 92 is offset by -5.990323 and -7.724118 pixels which is larger than
2 X fitted extent = 0.814166 x 0.814166, not incorporating fit results
[Sat Jul 28 03:55:51 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 03:55:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 03:55:51 2012] Assessing source extent using major
[Sat Jul 28 03:55:51 2012] Source does appear to be extended
[Sat Jul 28 03:55:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 03:56:53 2012] XMMSAS src. selection expression = ellipse(40539.001892, 24728.161713, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 28 03:56:53 2012] Writing source region out to fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src92_src.reg
[Sat Jul 28 03:56:53 2012] Extracting stamp from image fullrun_pn_xmm0554610101_pi300-10000_cl_sm2.00.img.gz, (429, 247) - (504, 322)
[Sat Jul 28 03:56:53 2012] XMMSAS bgd. selection expression = annulus(40539.001892, 24728.161713, 1087.500000, 2175.000000, X, Y) && !ellipse(40040.772369, 23263.129822, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(38009.396179, 26720.394806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39200.620209, 26149.337830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38688.361511, 22797.703186, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 28 03:56:53 2012] Writing fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src92.gif
[Sat Jul 28 05:48:48 2012] Mean detx,y = (13424.56, 998.08) 
[Sat Jul 28 05:48:52 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 05:49:22 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 05:49:22 2012] Setting source spectrum file to fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src92_src_b10.pi.gz
[Sat Jul 28 05:49:22 2012] Setting bgd. spectrum file to fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src92_bgd.pi.gz
[Sat Jul 28 07:23:37 2012] Not generating rmf since there are only 84 counts
[Sat Jul 28 07:23:37 2012] rmf not generated due to insufficient counts
[Sat Jul 28 11:14:15 2012] Updating aperture counts using extracted products
[Sat Jul 28 11:14:15 2012] Error reading totcts from fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src92_src_b10.pi.gz
[Sat Jul 28 11:14:24 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 11:14:24 2012] Using photon index=1.80, rate=0.00137, arf fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src92.arf
[Sat Jul 28 11:14:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 11:14:24 2012] Updating source flux to 1.2e-14
[Sat Jul 28 11:24:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting