[Fri Jul 27 10:39:03 2012] Detection parameters:
  Position = (389.1, 323.1) = 5 24 38.22 1 42 28.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.1 +/- 17.8
  Background counts = 80.2
  Rate = 0.003 +/- 0.0004

[Fri Jul 27 10:39:05 2012] Off-axis axis estimate = 6.81'
[Fri Jul 27 10:47:18 2012] Using EEF radius (= 9.84 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 10:47:18 2012] Initial guess for spatial extent in simple fitting = 9.84"
[Fri Jul 27 10:47:18 2012] source mask rpix=2.3, npix_max = 30, mask sum = 34, frac = 1.115
[Fri Jul 27 10:47:18 2012] Giving source the simple spatial ID 80 for pass 0, mean size = 9.84"
[Fri Jul 27 14:52:14 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src80.ximg exists
[Fri Jul 27 14:52:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src80.csv
[Fri Jul 27 14:52:14 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src80_1.ximg exists
[Fri Jul 27 14:52:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src80.csv
[Fri Jul 27 14:52:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src80_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 14:52:16 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src80.ximg exists
[Fri Jul 27 14:52:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src80.csv
[Fri Jul 27 14:52:16 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src80_1.ximg exists
[Fri Jul 27 14:52:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src80.csv
[Fri Jul 27 14:52:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src80_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 20:13:16 2012] Spatial fit model total counts = 1154.880000, observed total counts = 1157.000000
[Fri Jul 27 20:13:16 2012] Offset between fit and detection position for source 86 = 0.978337 pixels
[Fri Jul 27 20:13:16 2012] Warning, changing simple spatial fit ID from 80 to 79
[Fri Jul 27 20:13:16 2012] 1141.370000 total counts/ 1141.370000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 86 = 0.978337 pixels
  Position = (388.8, 322.2) = 5 24 38.30 1 42 25.8
  Extent = 2.4" x 2.4", rotation angle = 0
  Source counts = 0.0 +/- 33.8
  Background counts = 1141.4
  Rate = 2e-14 +/- 0.0005
  Deleting source due to low Poisson probability