[Fri Jul 27 10:39:01 2012] Detection parameters:
  Position = (260.2, 200.8) = 5 25 15.62 1 33 38.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1686.3 +/- 49.5
  Background counts = 84.5
  Rate = 0.03 +/- 0.0008

[Fri Jul 27 10:39:05 2012] Off-axis axis estimate = 7.60'
[Fri Jul 27 10:47:18 2012] Using EEF radius (= 10.23 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 10:47:18 2012] Initial guess for spatial extent in simple fitting = 10.23"
[Fri Jul 27 10:47:18 2012] source mask rpix=2.4, npix_max = 32, mask sum = 29, frac = 0.891
[Fri Jul 27 10:47:18 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 10.23"
[Fri Jul 27 14:52:14 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src38.ximg exists
[Fri Jul 27 14:52:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src38.csv
[Fri Jul 27 14:52:14 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src38_1.ximg exists
[Fri Jul 27 14:52:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src38.csv
[Fri Jul 27 14:52:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 14:52:15 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Fri Jul 27 14:52:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src38.csv
[Fri Jul 27 14:52:15 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Fri Jul 27 14:52:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src38.csv
[Fri Jul 27 14:52:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 20:13:15 2012] Spatial fit model total counts = 3286.570000, observed total counts = 2848.000000
[Fri Jul 27 20:13:15 2012] Poor agreement between spatial fit and data for source 42
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 27 20:13:16 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 20:13:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 20:13:16 2012] Assessing source extent using major
[Fri Jul 27 20:13:16 2012] Source does appear to be extended
[Fri Jul 27 20:13:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 20:13:16 2012] Source is confused with source 39
[Fri Jul 27 20:14:07 2012] Using EEF radius (= 10.23 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 20:14:07 2012] Initial guess for spatial extent in simple fitting = 10.23"
[Fri Jul 27 20:14:07 2012] source mask rpix=2.4, npix_max = 32, mask sum = 29, frac = 0.891
[Fri Jul 27 20:14:07 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 10.23"
[Fri Jul 27 23:26:24 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_src37.ximg exists
[Fri Jul 27 23:26:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_src37.csv
[Fri Jul 27 23:26:25 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_src37_1.ximg exists
[Fri Jul 27 23:26:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_src37.csv
[Fri Jul 27 23:26:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 23:26:26 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Fri Jul 27 23:26:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src37.csv
[Fri Jul 27 23:26:26 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Fri Jul 27 23:26:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src37.csv
[Fri Jul 27 23:26:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 03:55:51 2012] Spatial fit model total counts = 3286.470000, observed total counts = 2848.000000
[Sat Jul 28 03:55:51 2012] Poor agreement between spatial fit and data for source 42
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jul 28 03:55:51 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 03:55:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 03:55:51 2012] Assessing source extent using major
[Sat Jul 28 03:55:51 2012] Source does appear to be extended
[Sat Jul 28 03:55:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 03:56:52 2012] Counts = 1686.303589, rescaling region sizes by 2.000000
[Sat Jul 28 03:56:52 2012] XMMSAS src. selection expression = ellipse(22590.008209, 17417.290298, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Jul 28 03:56:52 2012] Writing source region out to fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src42_src.reg
[Sat Jul 28 03:56:52 2012] Extracting stamp from image fullrun_pn_xmm0554610101_pi300-10000_cl_sm2.00.img.gz, (185, 126) - (335, 276)
[Sat Jul 28 03:56:52 2012] XMMSAS bgd. selection expression = annulus(22590.008209, 17417.290298, 4350.000000, 8700.000000, X, Y) && !ellipse(28769.195000, 24319.304000, 431.021612, 431.021612, 0.000000, X, Y) && !ellipse(31395.983187, 14835.037898, 627.289812, 409.624773, 344.360060, X, Y) && !ellipse(15268.925552, 25457.397369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28863.500200, 24737.442000, 1241.040036, 469.496014, 110.340000, X, Y) && !ellipse(29591.426666, 23551.370422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27231.789600, 23163.708640, 453.025613, 453.025613, 0.000000, X, Y) && !ellipse(26652.610340, 21878.169400, 414.792012, 414.792012, 0.000000, X, Y) && !ellipse(18741.730423, 21969.742920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18978.871002, 21682.001465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22516.631165, 20771.998138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30946.227051, 20826.963882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24261.383667, 20156.720322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26702.492400, 18987.478400, 428.866412, 428.866412, 0.000000, X, Y) && !ellipse(24996.763062, 18330.601791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22354.615967, 17894.657928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16996.393800, 17963.604400, 553.528816, 303.301609, 52.445766, X, Y) && !ellipse(18531.472015, 16752.647522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26479.166809, 16724.840073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30763.924774, 13141.208969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27622.249847, 13954.805527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19908.978210, 25175.284576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26923.098328, 24709.887146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26638.802000, 24557.410000, 1133.320033, 1133.320033, 0.000000, X, Y) && !ellipse(21135.081800, 23502.878600, 473.276014, 473.276014, 0.000000, X, Y) && !ellipse(23417.047180, 22907.719635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25765.192000, 21322.624200, 399.638411, 399.638411, 0.000000, X, Y) && !ellipse(23924.094055, 20407.548904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20219.236969, 20227.204712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15012.426220, 20188.608600, 684.004820, 684.004820, 0.000000, X, Y) && !ellipse(22531.239136, 19519.701797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15440.547800, 19085.771500, 684.504820, 371.109611, 51.097000, X, Y) && !ellipse(22636.877441, 18899.388718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21913.484177, 19000.346207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20914.344879, 18908.581757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30871.421600, 18717.136887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28262.401306, 18680.505447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23369.378784, 18283.409973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29069.123993, 17790.148010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21998.131821, 17968.311096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21896.729614, 17372.865021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30443.377777, 16694.487778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29665.066559, 15896.116486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22894.396698, 15875.610367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25651.923401, 13260.502090, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 28 03:56:52 2012] Writing fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src42.gif
[Sat Jul 28 05:06:03 2012] Mean detx,y = (-3409.57, 10204.67) 
[Sat Jul 28 05:06:10 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 05:08:21 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 05:08:21 2012] Setting source spectrum file to fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Sat Jul 28 05:08:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Sat Jul 28 07:09:10 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 28 07:09:10 2012] rmf not generated due to insufficient counts
[Sat Jul 28 11:14:12 2012] Updating aperture counts using extracted products
[Sat Jul 28 11:14:12 2012] Error reading totcts from fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Sat Jul 28 11:14:21 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 11:14:21 2012] Using photon index=1.80, rate=0.0272, arf fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src42.arf
[Sat Jul 28 11:14:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 11:14:21 2012] Updating source flux to 2.7e-13
[Sat Jul 28 11:24:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting