[Fri Jul 27 10:38:59 2012] Detection parameters:
  Position = (361.4, 171.0) = 5 24 46.27 1 31 28.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4002.4 +/- 76.6
  Background counts = 80.3
  Rate = 0.06 +/- 0.001

[Fri Jul 27 10:39:05 2012] Off-axis axis estimate = 10.30'
[Fri Jul 27 10:47:18 2012] Using EEF radius (= 11.58 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 10:47:18 2012] Initial guess for spatial extent in simple fitting = 11.58"
[Fri Jul 27 10:47:18 2012] source mask rpix=2.7, npix_max = 39, mask sum = 42, frac = 1.050
[Fri Jul 27 10:47:18 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.58"
[Fri Jul 27 14:52:13 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jul 27 14:52:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src3.csv
[Fri Jul 27 14:52:13 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jul 27 14:52:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src3.csv
[Fri Jul 27 14:52:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 14:52:15 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jul 27 14:52:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jul 27 14:52:15 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jul 27 14:52:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jul 27 14:52:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 20:13:15 2012] Warning, spatial fit 3 centroid is now closest to src. 122
[Fri Jul 27 20:13:16 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 20:13:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 20:13:16 2012] Assessing source extent using major
[Fri Jul 27 20:13:16 2012] Source does appear to be extended
[Fri Jul 27 20:13:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 20:14:07 2012] Using EEF radius (= 11.58 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 20:14:07 2012] Initial guess for spatial extent in simple fitting = 11.58"
[Fri Jul 27 20:14:07 2012] source mask rpix=2.7, npix_max = 39, mask sum = 42, frac = 1.050
[Fri Jul 27 20:14:07 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.58"
[Fri Jul 27 23:26:24 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jul 27 23:26:24 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jul 27 23:26:24 2012] Fit fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_src3 appears to have run properly
[Fri Jul 27 23:26:25 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jul 27 23:26:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jul 27 23:26:25 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jul 27 23:26:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jul 27 23:26:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 03:55:51 2012] Spatial fit model total counts = 4569.900000, observed total counts = 4301.000000
[Sat Jul 28 03:55:51 2012] Offset between fit and detection position for source 3 = 0.075123 pixels
[Sat Jul 28 03:55:51 2012] 4588.260000 total counts/ 1540.310000 bgd. counts: snr = 77.661142
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.075123 pixels
  Position = (361.4, 171.1) = 5 24 46.26 1 31 28.6
  Extent = 7.8" x 5.1", rotation angle = 344
  Source counts = 3047.9 +/- 67.7
  Background counts = 1540.3
  Rate = 0.05 +/- 0.001
[Sat Jul 28 03:55:51 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 03:55:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 03:55:51 2012] Assessing source extent using major
[Sat Jul 28 03:55:51 2012] Source does appear to be extended
[Sat Jul 28 03:55:51 2012] Computing asymmetry using major and minor axis, asym = 1.53
[Sat Jul 28 03:55:51 2012] Source is asymmetric
[Sat Jul 28 03:56:50 2012] Counts = 3047.950000, rescaling region sizes by 2.000000
[Sat Jul 28 03:56:50 2012] XMMSAS src. selection expression = ellipse(31395.983187, 14835.037898, 940.934718, 614.437160, 344.360060, X, Y)
[Sat Jul 28 03:56:50 2012] Writing source region out to fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src3_src.reg
[Sat Jul 28 03:56:50 2012] Extracting stamp from image fullrun_pn_xmm0554610101_pi300-10000_cl_sm2.00.img.gz, (307, 117) - (416, 225)
[Sat Jul 28 03:56:50 2012] XMMSAS bgd. selection expression = annulus(31395.983187, 14835.037898, 3136.449060, 6272.898120, X, Y) && !ellipse(40040.772369, 23263.129822, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(30946.227051, 20826.963882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24261.383667, 20156.720322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26702.492400, 18987.478400, 428.866412, 428.866412, 0.000000, X, Y) && !ellipse(24996.763062, 18330.601791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32435.756897, 18036.042221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26479.166809, 16724.840073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30763.924774, 13141.208969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27622.249847, 13954.805527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25765.192000, 21322.624200, 399.638411, 399.638411, 0.000000, X, Y) && !ellipse(37288.930084, 18823.145569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30871.421600, 18717.136887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28262.401306, 18680.505447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29069.123993, 17790.148010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30443.377777, 16694.487778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29665.066559, 15896.116486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32577.654938, 15122.921509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25651.923401, 13260.502090, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 28 03:56:50 2012] Writing fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src3.gif
[Sat Jul 28 04:07:21 2012] Mean detx,y = (5695.28, 11822.24) 
[Sat Jul 28 04:07:25 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 04:08:49 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 04:08:49 2012] Setting source spectrum file to fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jul 28 04:08:49 2012] Setting bgd. spectrum file to fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Jul 28 11:14:09 2012] Updating aperture counts using extracted products
[Sat Jul 28 11:14:09 2012] Error reading totcts from fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jul 28 11:14:17 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 11:14:17 2012] Using photon index=1.80, rate=0.0491, arf fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src3.arf
[Sat Jul 28 11:14:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 11:14:17 2012] Updating source flux to 3.4e-13