[Fri Jul 27 10:38:59 2012] Detection parameters:
  Position = (331.2, 280.0) = 5 24 55.03 1 39 23.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 6916.3 +/- 102.0
  Background counts = 87.9
  Rate = 0.1 +/- 0.002

[Fri Jul 27 10:39:05 2012] Off-axis axis estimate = 2.72'
[Fri Jul 27 10:47:18 2012] Using EEF radius (= 7.79 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 10:47:18 2012] Initial guess for spatial extent in simple fitting = 7.79"
[Fri Jul 27 10:47:18 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.762
[Fri Jul 27 10:47:18 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.79"
[Fri Jul 27 14:52:13 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jul 27 14:52:13 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jul 27 14:52:13 2012] Fit fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src2 appears to have run properly
[Fri Jul 27 14:52:15 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jul 27 14:52:15 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jul 27 14:52:15 2012] Fit fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Jul 27 20:13:15 2012] Spatial fit model total counts = 7185.850000, observed total counts = 7191.000000
[Fri Jul 27 20:13:15 2012] Offset between fit and detection position for source 2 = 0.050197 pixels
[Fri Jul 27 20:13:15 2012] 7272.190000 total counts/ 2571.240000 bgd. counts: snr = 92.707384
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.050197 pixels
  Position = (331.2, 280.1) = 5 24 55.01 1 39 22.7
  Extent = 5.6 (5.4-5.7)" x 5.3 (5.4-5.7)", rotation angle = 58 (45-90) degrees
  Source counts = 4700.9 +/- 85.3
  Background counts = 2571.2
  Rate = 0.08 +/- 0.001
[Fri Jul 27 20:13:16 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 20:13:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 20:13:16 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 20:13:16 2012] Source does appear to be extended
[Fri Jul 27 20:13:16 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.93
[Fri Jul 27 20:13:16 2012] Source is confused with source 28
[Fri Jul 27 20:14:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 27 20:14:07 2012] Initial guess for spatial extent in simple fitting = 5.46"
[Fri Jul 27 20:14:07 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.300
[Fri Jul 27 20:14:07 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.46"
[Fri Jul 27 23:26:24 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jul 27 23:26:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_src2.csv
[Fri Jul 27 23:26:24 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jul 27 23:26:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_src2.csv
[Fri Jul 27 23:26:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 23:26:25 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jul 27 23:26:25 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jul 27 23:26:25 2012] Fit fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Jul 28 03:55:51 2012] Spatial fit model total counts = 7190.290000, observed total counts = 7191.000000
[Sat Jul 28 03:55:51 2012] Offset between fit and detection position for source 2 = 0.030827 pixels
[Sat Jul 28 03:55:51 2012] 7094.520000 total counts/ 2468.690000 bgd. counts: snr = 93.101438
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.030827 pixels
  Position = (331.2, 280.1) = 5 24 55.01 1 39 22.8
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 4625.8 +/- 84.2
  Background counts = 2468.7
  Rate = 0.07 +/- 0.001
[Sat Jul 28 03:55:51 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 03:55:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 03:55:51 2012] Assessing source extent using major axis lower bound
[Sat Jul 28 03:55:51 2012] Source does appear to be extended
[Sat Jul 28 03:55:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 03:56:50 2012] Counts = 4625.830000, rescaling region sizes by 2.000000
[Sat Jul 28 03:56:50 2012] XMMSAS src. selection expression = ellipse(28769.195000, 24319.304000, 646.532419, 646.532419, 0.000000, X, Y)
[Sat Jul 28 03:56:50 2012] Writing source region out to fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src2_src.reg
[Sat Jul 28 03:56:50 2012] Extracting stamp from image fullrun_pn_xmm0554610101_pi300-10000_cl_sm2.00.img.gz, (294, 243) - (368, 317)
[Sat Jul 28 03:56:50 2012] XMMSAS bgd. selection expression = annulus(28769.195000, 24319.304000, 2155.108062, 4310.216124, X, Y) && !ellipse(28863.500200, 24737.442000, 1241.040036, 469.496014, 110.340000, X, Y) && !ellipse(29591.426666, 23551.370422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27231.789600, 23163.708640, 453.025613, 453.025613, 0.000000, X, Y) && !ellipse(26652.610340, 21878.169400, 414.792012, 414.792012, 0.000000, X, Y) && !ellipse(30946.227051, 20826.963882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24261.383667, 20156.720322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30314.146881, 29088.481812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33026.516846, 28647.683228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27943.859400, 27078.886400, 442.093613, 442.093613, 0.000000, X, Y) && !ellipse(26923.098328, 24709.887146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26638.802000, 24557.410000, 1133.320033, 1133.320033, 0.000000, X, Y) && !ellipse(33538.751648, 22100.951813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25765.192000, 21322.624200, 399.638411, 399.638411, 0.000000, X, Y) && !ellipse(23924.094055, 20407.548904, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 28 03:56:50 2012] Writing fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src2.gif
[Sat Jul 28 04:05:48 2012] Mean detx,y = (1969.24, 2715.46) 
[Sat Jul 28 04:05:53 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 04:06:48 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 04:06:49 2012] Setting source spectrum file to fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jul 28 04:06:49 2012] Setting bgd. spectrum file to fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jul 28 11:14:09 2012] Updating aperture counts using extracted products
[Sat Jul 28 11:14:09 2012] Error reading totcts from fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jul 28 11:14:17 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 11:14:17 2012] Using photon index=1.80, rate=0.0746, arf fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src2.arf
[Sat Jul 28 11:14:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 11:14:17 2012] Updating source flux to 2.6e-13
[Sat Jul 28 11:24:46 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Sat Jul 28 11:31:08 2012] Reading fit data from xmm0554610101/analysis//spectral/fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src2_pl.csv
[Sat Jul 28 11:31:08 2012] Spectral fit parameter nH value = 7.19752e+21
[Sat Jul 28 11:31:08 2012] Spectral fit parameter PhoIndex value = 6.4509
[Sat Jul 28 11:31:08 2012] Failed to get F(0.3-8.0) from xmm0554610101/analysis//spectral/fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Jul 28 11:31:08 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 11:31:08 2012] Using Nh = 7.2e+21, photon index=6.45, rate=0.0746, arf fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src2.arf
[Sat Jul 28 11:31:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 11:31:08 2012] Updating source flux to 1.5e-13