[Fri Jul 27 10:38:59 2012] Detection parameters:
  Position = (255.4, 404.1) = 5 25 17.01 1 48 22.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1181.4 +/- 42.2
  Background counts = 67.2
  Rate = 0.02 +/- 0.0007

[Fri Jul 27 10:39:05 2012] Off-axis axis estimate = 8.27'
[Fri Jul 27 10:47:18 2012] Using EEF radius (= 10.56 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 10:47:18 2012] Initial guess for spatial extent in simple fitting = 10.56"
[Fri Jul 27 10:47:18 2012] source mask rpix=2.4, npix_max = 34, mask sum = 18, frac = 0.525
[Fri Jul 27 10:47:18 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.56"
[Fri Jul 27 14:52:13 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src11.ximg exists
[Fri Jul 27 14:52:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src11.csv
[Fri Jul 27 14:52:13 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Jul 27 14:52:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src11.csv
[Fri Jul 27 14:52:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 14:52:15 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Jul 27 14:52:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri Jul 27 14:52:15 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Jul 27 14:52:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Fri Jul 27 14:52:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 20:13:15 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 14.101007 pixels away
[Fri Jul 27 20:13:16 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 20:13:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 20:13:16 2012] Assessing source extent using major
[Fri Jul 27 20:13:16 2012] Source does appear to be extended
[Fri Jul 27 20:13:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 20:14:07 2012] Using EEF radius (= 10.56 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 20:14:07 2012] Initial guess for spatial extent in simple fitting = 10.56"
[Fri Jul 27 20:14:07 2012] source mask rpix=2.4, npix_max = 34, mask sum = 18, frac = 0.525
[Fri Jul 27 20:14:07 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 10.56"
[Fri Jul 27 23:26:24 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_src10.ximg exists
[Fri Jul 27 23:26:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_src10.csv
[Fri Jul 27 23:26:24 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri Jul 27 23:26:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_src10.csv
[Fri Jul 27 23:26:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 23:26:25 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri Jul 27 23:26:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri Jul 27 23:26:25 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Jul 27 23:26:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri Jul 27 23:26:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 03:55:51 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 14.101007 pixels away
[Sat Jul 28 03:55:51 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 03:55:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 03:55:51 2012] Assessing source extent using major
[Sat Jul 28 03:55:51 2012] Source does appear to be extended
[Sat Jul 28 03:55:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 03:56:50 2012] Counts = 1181.440552, rescaling region sizes by 2.000000
[Sat Jul 28 03:56:50 2012] XMMSAS src. selection expression = ellipse(22172.697342, 35109.405914, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Jul 28 03:56:50 2012] Writing source region out to fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src11_src.reg
[Sat Jul 28 03:56:50 2012] Extracting stamp from image fullrun_pn_xmm0554610101_pi300-10000_cl_sm2.00.img.gz, (180, 329) - (330, 479)
[Sat Jul 28 03:56:50 2012] XMMSAS bgd. selection expression = annulus(22172.697342, 35109.405914, 4350.000000, 8700.000000, X, Y) && !ellipse(30980.288422, 42994.938507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16952.027600, 39756.982200, 906.952026, 375.896811, 304.532900, X, Y) && !ellipse(30344.557000, 37383.450200, 438.857613, 438.857613, 0.000000, X, Y) && !ellipse(31006.424530, 35247.013428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20905.007141, 33361.905457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30574.074000, 32747.430000, 673.763219, 673.763219, 0.000000, X, Y) && !ellipse(13515.773000, 32043.913800, 534.199215, 534.199215, 0.000000, X, Y) && !ellipse(23115.312800, 31887.887000, 492.076014, 492.076014, 0.000000, X, Y) && !ellipse(12289.416000, 30410.940000, 1447.552042, 407.926412, 312.142000, X, Y) && !ellipse(26186.867200, 30098.237800, 418.869612, 418.869612, 0.000000, X, Y) && !ellipse(23134.609424, 29352.976813, 627.879382, 417.060761, 307.735218, X, Y) && !ellipse(15369.920212, 28558.338837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26985.342834, 43729.993988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24875.353882, 43776.085297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16778.052170, 42584.547974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30970.090454, 40499.412750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23963.603546, 39490.822876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28974.923553, 38770.423157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28798.884491, 37642.675568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14113.509903, 37518.475952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24607.604797, 37279.348083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29231.994110, 34837.971649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27882.934860, 34580.060800, 461.884813, 352.618410, 333.928000, X, Y) && !ellipse(29781.731201, 32940.496552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28712.649139, 32748.264465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24615.992035, 32071.216064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13171.544006, 30927.620605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27376.338379, 30949.498047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30120.425323, 30745.474976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29699.512820, 29385.629400, 364.522410, 364.522410, 0.000000, X, Y) && !ellipse(30314.146881, 29088.481812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22980.114319, 27890.758270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18980.007355, 27165.722870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27943.859400, 27078.886400, 442.093613, 442.093613, 0.000000, X, Y)
[Sat Jul 28 03:56:50 2012] Writing fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src11.gif
[Sat Jul 28 04:14:25 2012] Mean detx,y = (-5828.55, -7206.74) 
[Sat Jul 28 04:14:33 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 04:17:45 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 04:17:45 2012] Setting source spectrum file to fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Jul 28 04:17:45 2012] Setting bgd. spectrum file to fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat Jul 28 06:33:46 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 28 06:33:46 2012] rmf not generated due to insufficient counts
[Sat Jul 28 11:14:10 2012] Updating aperture counts using extracted products
[Sat Jul 28 11:14:10 2012] Error reading totcts from fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Jul 28 11:14:18 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 11:14:18 2012] Using photon index=1.80, rate=0.019, arf fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src11.arf
[Sat Jul 28 11:14:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 11:14:18 2012] Updating source flux to 1.4e-13
[Sat Jul 28 11:24:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting