[Fri Jul 27 10:38:59 2012] Detection parameters:
  Position = (460.8, 267.9) = 5 24 17.43 1 38 29.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10255.9 +/- 121.5
  Background counts = 67.7
  Rate = 0.2 +/- 0.002

[Fri Jul 27 10:39:05 2012] Off-axis axis estimate = 11.98'
[Fri Jul 27 10:47:18 2012] Using EEF radius (= 12.42 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 10:47:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 27 10:47:18 2012] Initial guess for spatial extent in simple fitting = 12.42"
[Fri Jul 27 10:47:18 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.933
[Fri Jul 27 10:47:18 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.42"
[Fri Jul 27 14:52:13 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 27 14:52:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src1.csv
[Fri Jul 27 14:52:13 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 27 14:52:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src1.csv
[Fri Jul 27 14:52:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 14:52:15 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 27 14:52:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jul 27 14:52:15 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 27 14:52:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jul 27 14:52:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554610101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 20:13:15 2012] Warning, spatial fit 1 centroid is now closest to src. 98
[Fri Jul 27 20:13:16 2012] Source 1 is offset by 5.067889 and 4.152386 pixels which is larger than
2 X fitted extent = 1.410359 x 1.368602, not incorporating fit results
[Fri Jul 27 20:13:16 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 20:13:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 20:13:16 2012] Assessing source extent using major
[Fri Jul 27 20:13:16 2012] Source does appear to be extended
[Fri Jul 27 20:13:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 20:14:07 2012] Using EEF radius (= 12.42 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 20:14:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 27 20:14:07 2012] Initial guess for spatial extent in simple fitting = 12.42"
[Fri Jul 27 20:14:07 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.933
[Fri Jul 27 20:14:07 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.42"
[Fri Jul 27 23:26:24 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 27 23:26:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_src1.csv
[Fri Jul 27 23:26:24 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 27 23:26:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_src1.csv
[Fri Jul 27 23:26:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 23:26:25 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 27 23:26:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jul 27 23:26:25 2012] fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 27 23:26:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jul 27 23:26:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0554610101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 28 03:55:51 2012] Warning, spatial fit 1 centroid is now closest to src. 98
[Sat Jul 28 03:55:51 2012] Source 1 is offset by 5.122230 and 6.799704 pixels which is larger than
2 X fitted extent = 1.372450 x 1.368602, not incorporating fit results
[Sat Jul 28 03:55:51 2012] Vigneting correction estimate = 1.000000
[Sat Jul 28 03:55:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 28 03:55:51 2012] Assessing source extent using major
[Sat Jul 28 03:55:51 2012] Source does appear to be extended
[Sat Jul 28 03:55:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 03:56:50 2012] Counts = 10255.938477, rescaling region sizes by 3.000000
[Sat Jul 28 03:56:50 2012] XMMSAS src. selection expression = ellipse(40040.772369, 23263.129822, 1957.500000, 1957.500000, 0.000000, X, Y)
[Sat Jul 28 03:56:50 2012] Writing source region out to fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src1_src.reg
[Sat Jul 28 03:56:50 2012] Extracting stamp from image fullrun_pn_xmm0554610101_pi300-10000_cl_sm2.00.img.gz, (348, 155) - (573, 380)
[Sat Jul 28 03:56:50 2012] XMMSAS bgd. selection expression = annulus(40040.772369, 23263.129822, 9787.500000, 19575.000000, X, Y) && !ellipse(28769.195000, 24319.304000, 431.021612, 431.021612, 0.000000, X, Y) && !ellipse(31395.983187, 14835.037898, 627.289812, 409.624773, 344.360060, X, Y) && !ellipse(33584.606000, 42003.694000, 387.450411, 387.450411, 0.000000, X, Y) && !ellipse(30980.288422, 42994.938507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30344.557000, 37383.450200, 438.857613, 438.857613, 0.000000, X, Y) && !ellipse(31006.424530, 35247.013428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22172.697342, 35109.405914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35814.456909, 34929.580780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20905.007141, 33361.905457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30574.074000, 32747.430000, 673.763219, 673.763219, 0.000000, X, Y) && !ellipse(23115.312800, 31887.887000, 492.076014, 492.076014, 0.000000, X, Y) && !ellipse(26186.867200, 30098.237800, 418.869612, 418.869612, 0.000000, X, Y) && !ellipse(23134.609424, 29352.976813, 627.879382, 417.060761, 307.735218, X, Y) && !ellipse(40938.510100, 28742.023053, 649.605820, 433.133371, 90.000000, X, Y) && !ellipse(38009.396179, 26720.394806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39200.620209, 26149.337830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28863.500200, 24737.442000, 1241.040036, 469.496014, 110.340000, X, Y) && !ellipse(29591.426666, 23551.370422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27231.789600, 23163.708640, 453.025613, 453.025613, 0.000000, X, Y) && !ellipse(26652.610340, 21878.169400, 414.792012, 414.792012, 0.000000, X, Y) && !ellipse(22516.631165, 20771.998138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30946.227051, 20826.963882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24261.383667, 20156.720322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26702.492400, 18987.478400, 428.866412, 428.866412, 0.000000, X, Y) && !ellipse(24996.763062, 18330.601791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22354.615967, 17894.657928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32435.756897, 18036.042221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22590.008209, 17417.290298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26479.166809, 16724.840073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30763.924774, 13141.208969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32988.980042, 42589.499603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32647.981354, 42134.570953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30970.090454, 40499.412750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23963.603546, 39490.822876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28974.923553, 38770.423157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28798.884491, 37642.675568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24607.604797, 37279.348083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36104.189636, 36116.097443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33690.202484, 35946.844635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37675.935120, 34933.627045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29231.994110, 34837.971649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27882.934860, 34580.060800, 461.884813, 352.618410, 333.928000, X, Y) && !ellipse(34709.762939, 33638.126740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29781.731201, 32940.496552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28712.649139, 32748.264465, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41187.662720, 32399.340515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24615.992035, 32071.216064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35888.391510, 32063.657196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34364.213531, 31940.803680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41077.680786, 30998.217834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33278.322000, 30963.046000, 301.716809, 300.055209, 84.449000, X, Y) && !ellipse(27622.249847, 13954.805527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32643.544800, 30878.773376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27376.338379, 30949.498047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30120.425323, 30745.474976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33849.860016, 30404.433807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29699.512820, 29385.629400, 364.522410, 364.522410, 0.000000, X, Y) && !ellipse(40297.147308, 29191.579254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30314.146881, 29088.481812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33026.516846, 28647.683228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36823.267151, 28113.241760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22980.114319, 27890.758270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27943.859400, 27078.886400, 442.093613, 442.093613, 0.000000, X, Y) && !ellipse(19908.978210, 25175.284576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40539.001892, 24728.161713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26923.098328, 24709.887146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26638.802000, 24557.410000, 1133.320033, 1133.320033, 0.000000, X, Y) && !ellipse(34081.166168, 23729.029053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21135.081800, 23502.878600, 473.276014, 473.276014, 0.000000, X, Y) && !ellipse(38688.361511, 22797.703186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23417.047180, 22907.719635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33538.751648, 22100.951813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25765.192000, 21322.624200, 399.638411, 399.638411, 0.000000, X, Y) && !ellipse(40092.627747, 21373.193680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23924.094055, 20407.548904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20219.236969, 20227.204712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39798.770600, 20078.478000, 2031.512058, 669.992019, 293.569400, X, Y) && !ellipse(22531.239136, 19519.701797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22636.877441, 18899.388718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21913.484177, 19000.346207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20914.344879, 18908.581757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37288.930084, 18823.145569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30871.421600, 18717.136887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28262.401306, 18680.505447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23369.378784, 18283.409973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29069.123993, 17790.148010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21998.131821, 17968.311096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21896.729614, 17372.865021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30443.377777, 16694.487778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29665.066559, 15896.116486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22894.396698, 15875.610367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32577.654938, 15122.921509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25651.923401, 13260.502090, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 28 03:56:50 2012] Writing fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src1.gif
[Sat Jul 28 03:57:35 2012] Mean detx,y = (13148.95, 2425.87) 
[Sat Jul 28 03:57:44 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 04:05:11 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 04:05:11 2012] Setting source spectrum file to fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 28 04:05:11 2012] Setting bgd. spectrum file to fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jul 28 06:16:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 28 06:16:27 2012] rmf not generated due to insufficient counts
[Sat Jul 28 11:14:09 2012] Updating aperture counts using extracted products
[Sat Jul 28 11:14:09 2012] Error reading totcts from fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jul 28 11:14:17 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 11:14:17 2012] Using photon index=1.80, rate=0.165, arf fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src1.arf
[Sat Jul 28 11:14:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 11:14:17 2012] Updating source flux to 1e-12
[Sat Jul 28 11:24:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jul 28 11:31:08 2012] xmm0554610101/analysis//spectral/fullrun_pn_xmm0554610101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete